All products

This range of products is what sets us apart, and has resulted in government awards for innovation & sustainability. Add sustainability to your monitoring well installations, and reduce your plastic waste footprint.

  • A better designed well cover using recycled plastic for sustainability The Nondo Eco 180 well cover is designed with sustainability in mind. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Nondo Eco 180 is made entirely from recycled plastic and has been tested to meet load bearing requirements for traffic suitability for Australian Standard AS3996 Class D.
    • One piece gasket seals both the lid and around bolt holes heads to prevent surface water ingress, and completely seals the well
    • 2 stainless steel bolts, counter sunk with 8mm hex for secure lid clamp down
    • 180mm diameter OD, large 146mm ID, 122mm between bolt holes
    • High strength recycled plastic (HDPE & Delrin) is resistant to petroleum products
    • Unlike steel, recycled plastic will never rust
    • Lower cost than traditional cast iron covers
    • Light weight only 1.2kg but rated for heavy trucks
    • Load tested to AS3996 Class D traffic rating
    • Ideal for 50mm monitoring wells
    • The all recycled plastic Eco180 will never rust leaving your installation work always looking good
    • No more finger crushing under heavy lids, the Eco180 lid is lightweight with no sharp edges
  • A medium sized well cover with some big features The Nondo180 monitoring well cover contains a high quality machined cast iron lid and base, with a strong plastic skirt. It is ideal for 50mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D. The small 180mm OD makes it ideal for drillers who typically use a 200mm concrete corer.
  • The Nondo Safety Lifter / Multi Tool enables a safe way to remove our steel well cover lids and comes with all the necessary allen keys for our well covers and TriCap well plug.
  • Prepacked Screen for Environmental Monitoring Wells
    • Great solution for sites prone to collapsing sands
    • Ensures accurate placement of filter media across desired interval
    • No adapters required, will thread directly onto our casing
    • Available in 50mm (PN18), 1.5m lengths
    • Male / Female threaded
    • Bottom end caps available, including the universal 'FlexiPoint 50'
     

  • Screen and Casing Bore Pipe for Monitoring Well Installations Cut your costs for well installation and operate more sustainably on site. Each pair of 3m lengths of pipe is sleeved in biodegradable plastic, which means the sleeve will biodegrade away when disposed to a landfill, allowing you to help reduce the amount of plastic waste build-up. Most environmental screen and casing is wrapped in conventional plastic but this is adding to our plastic waste problem. The FieldTech Solutions Wellscreen is wrapped in biodegradable plastic preventing further plastic waste. We also use biodegradable packing tape in our shipments. 50mm casing and screen is made from uPVC and to class 18 size and is manufactured following the Australian Standard for Monitoring Wells. Each piece has a coarse male/female thread for easy field assembly and is o’ring sealed. Our biodegradable plastic wrapping:
    • Will only biodegrade once in a microbe rich environment such as a landfill
    • Does not require high oxygen or temperature to biodegrade such as in a commercial compost
    • Helps you to operate more sustainably
  • Filter sock can be used to protect groundwater wells from infiltration of fine silt and sediment. Made from polyester and with a 340 micron pore size. Available to suit 50mm, or 100mm to 150mm monitoring well screen. Simply sleeve the filter sock over the pvc screen before installation.  
  • Suitable for our 100mm PN12 PVC Screen and Casing, these flush-fitting bottom end caps are available with either male or female threads to help minimise your off-cut wastage during 100mm well installations.  

  • The Flexipoint is pointed bottom end cap made from recycled plastic. It is long enough to be installed on either the male or female threaded end of the 50mm slotted PVC screen, without a need to cut off the female thread.
  • Trim your casing below ground level safely and easily These new internal pipe cutters have an ingenious design to ensure a safe, easy, and clean cut without any PVC shavings falling into your monitoring well. The IPC50 and IPC100 are an ingenious design of internal pipe cutter. It uses a replaceable cutting wheel blade to give a clean cut without any shavings. As you tighten the handle and rotate, the cutting wheel pushes against the inside of the casing and cutting cleanly through. The replaceable cutting wheel pushes against the casing from the inside out, and is tightened with each rotation to give a clean and precise cut. Available in sizes to suit 50mm and 100mm casing.

Title

Go to Top