All products

This range of products is what sets us apart, and has resulted in government awards for innovation & sustainability. Add sustainability to your monitoring well installations, and reduce your plastic waste footprint.

  • The Nondo Mini monitoring well cover is our budget bolt-down, flush mounted well cover. It is designed to be used for monitoring wells or for soil vapour installations. With the bolts outside the inner working space, the Nondo Mini gives you maximum internal room for such a small cover. Features:
    • 2 counter-sunk flush bolts to reduce the risk of trip hazards, as there are no protruding bolt heads
    • High strength cast iron in black epoxy
    • White powder coated lid
    • Large internal opening of 124mm (98mm Bolt head clearance)
    • Small 150mm outside diameter
    • Ideal for standard 50mm monitoring wells or soil vapour implants
     
  • A better designed well cover using recycled plastic for sustainability The Nondo Eco 180 well cover is designed with sustainability in mind. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Nondo Eco 180 is made entirely from recycled plastic and has been tested to meet load bearing requirements for traffic suitability for Australian Standard AS3996 Class D.
    • One piece gasket seals both the lid and around bolt holes heads to prevent surface water ingress, and completely seals the well
    • 2 stainless steel bolts, counter sunk with 8mm hex for secure lid clamp down
    • 180mm diameter OD, large 146mm ID, 122mm between bolt holes
    • High strength recycled plastic (HDPE & Delrin) is resistant to petroleum products
    • Unlike steel, recycled plastic will never rust
    • Lower cost than traditional cast iron covers
    • Light weight only 1.2kg but rated for heavy trucks
    • Load tested to AS3996 Class D traffic rating
    • Ideal for 50mm monitoring wells
    • The all recycled plastic Eco180 will never rust leaving your installation work always looking good
    • No more finger crushing under heavy lids, the Eco180 lid is lightweight with no sharp edges
  • The BioBailerTM is a quick and easy way to sample groundwater. Simply lower the bailer into your well and it fills with water as it submerses. When you pull up to retrieve the bailer the check-valve closes, trapping approximately 1L of water inside. BioBailersTM are made from landfill-biodegradable* PVC, and will only start to biodegrade once in a microbe rich environment such as a landfill. They do not require high oxygen or temperature to biodegrade such as in a commercial compost. Achieve the same groundwater sampling integrity as non-biodegradable bailers but more responsibly.
    Need to sample LNAPL / PSH? The easiest and most cost effective way is with the Hydrocarbon only or HC BioBailers. HC BioBailersTM allow you to collect floating LNAPL / PSH from a well, without collecting water. The ball valve is denser than LNAPL but lighter than water so it pushes water out of the bailer while keeping the LNAPL. These bailers also have a wider mouth than regular bailers, allowing you to collect more LNAPL with each bail. Like all BiobailersTM they are landfill-biodegradable.
  • Disposable Bailer Cord Our disposable bailer cord is mainly used to deploy bailers and sleeve samplers. Made from polypropylene, it is well suitable for all types of ground water sampling. The 2.5mm diameter twine is packaged in a convenient 100m spool and also made in Australia. It has a manufacturers stated break load of approximately 195kg, so can be used for a range of applications.

Title

Go to Top