All products

This range of products is what sets us apart, and has resulted in government awards for innovation & sustainability. Add sustainability to your monitoring well installations, and reduce your plastic waste footprint.

  • The Nondo Safety Lifter / Multi Tool enables a safe way to remove our steel well cover lids and comes with all the necessary allen keys for our well covers and TriCap well plug.
  • The WC25Gas has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump.
  • The WC100GAS has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. The WC100Gas can also be locked in place with a padlock or by using a security screw or both for extra security. It has a large wing nut, designed to make it easier to tighten or release the plug. It comes with a ring below so you can hang/attach tubing, skimmers or sleeve samplers in the well.
  • This all pneumatic box will shut off the air supply to down-hole pumps when the tank, drum or IBC becomes full. This prevents overfilling of the drum and creating a spill. Ideal for LNAPL recovery projects. Comprising of a separate control box and tank sensor, the control box can be mounted separately from the drum. The tank sensor is screwed into the drum and connected to the control box by a small air hose. Being all pneumatic makes this inherently intrinsically safe.
  • The 100mm well plug is manufactured from a recycled composite glass filled polymer that will not corrode, and is stronger than steel, pound for pound. The  center locking mechanism allows a padlock to be secured in a variety of positions, offering more flexibility in applications with limited space. Constructed of recycled composite glass-filled polymer which is stronger than steel pound for pound, the 100mm well plug is designed for years of worry-free use. The wing nut design with a recessed grip allows a padlock (not included) to be easily installed. The 100mm well plug has a tethering attachment at the base for use with a variety of instruments, features no metal parts, and can be disassembled for easy decontamination. The standard well plug and GasCap is available for 100mm wells.  
  • The TriCap-LOG has been specifically designed for use with submersible groundwater level logging devices. Just like the TriCap-GAS, the hollow shaft intersects a horizontal side hole through the shaft near the bottom. An elbow fitting installed in the top enables the well to be vented to the atmosphere. Attach optional tubing to allow the vent port to be raised up above any surface water and prevent it from flowing into the well through the vent. A stainless spring clip is also provided for easy logger attachment. The Tricap-Log is the perfect choice for use with submersible groundwater logging devices.  It features an elbow fitting which vents the well to atmosphere, and a unique stainless spring clip for easy logger attachment. The TriCap is made from recycled plastic for sustainability and enables a groundwater monitoring well to be sealed and locked.
  • An environmental monitoring well cap or plug made from post-consumer recycled plastic for sustainability. The TriCap provides:
    • Strong protection for your monitoring wells
    • Self locking option with additional stainless steel security bolt, using a special key tool or allen key
    • Hanger cable holes on bottom end of shaft
    • Fully sustainable, made from recycled plastic waste
    • Wide rubber ring provides a water tight seal
    • Also available in orange
  • The TriCap-GAS has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or  suitable pump. The TriCapGas can also be locked in place with a padlock or by using a security screw or both for extra security. The TriCap has a partially hollow shaft that intersects a horizontal side hole near the bottom. This allows the well gas to be drawn in through the side hole and out the top. The side hole also serves to hang sampling or monitoring devices off the bottom of the cap while at the same time gas samples can be taken out through the shaft and out the gas quick connect fitting.
  • The Shelby sampler is a thin-walled soil sampling system. The system is used to sample soils that are particularly sensitive to sampling disturbance, as it has a very low wall thickness-to-sample area ratio. The sampler consists of a thin walled steel tube whose lower end is shaped to form a cutting edge. Fieldtech Solutions is now stocking U63 and U50 Shelby Tubes and drive heads. Drive Heads are available in AW, AWJ, or NWJ box threads.  
  • A medium sized well cover with some big features The Nondo180 monitoring well cover contains a high quality machined cast iron lid and base, with a strong plastic skirt. It is ideal for 50mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D. The small 180mm OD makes it ideal for drillers who typically use a 200mm concrete corer.

Title

Go to Top