Heron dipperLog Nano

The dipperLog NANO is a superior, low cost, accurate groundwater data logger. They are used by hydrogeologists and other groundwater professionals requiring a durable, reliable and cost effective solution to long term monitoring of groundwater levels and temperature in wells, boreholes and open bodies of water. The Heron logger is also ideal for applications involving short term pump and slug testing, or for wetland and tidal studies.

With an intuitive and user friendly software program, the dipperLog NANO is simple to launch and data recovery is fast and easy.

The Heron Instruments’ dipperLog NANO system allow users to enhance their data logging projects using a family of compatible and affordable accessories.

Description

  • Memory – 32,000 data sets (depth and temperature of water)
  • Download Speed – 32,000 data sets in 90 seconds
  • Battery – life of approx. 7 years based on 5 minute reading intervals
  • Calibration Certificate with each logger
  • Antifouling Screen

Deployment options

dipperLog_Well-Head

Well Head Readout Version: Leave in well to read- Direct Read

  • Suitable for long term monitoring with easy access for data download and real time readings
  • Downloading and re-programming can be done without removing the logger from the well
  • barLog NANO – recommended for barometric compensation for long term monitoring or where more than one logger is deployed within a 20 km radius
  • Vented version available (barLog NANO not needed)

vented-version

Vented Version: Leave in well to read

  • Suitable for long term monitoring with easy access for data download and real time readings
  • Downloading and re-programming can be done without removing the logger from the well
  • Venting tubing runs up the direct read cable to the filtered direct read well head installed at the top of the well

dipperLog_Suspended

Suspended Version: Remove from well to download

  • A lower cost alternative for long term monitoring
  • Suspended in the well using a non-corrosive, no stretch wire or cord
  • Needs to be raised to the surface for downloading and re-programming
  • Real time readings are not available with this option
  • barLog NANO – recommended for barometric compensation for long term monitoring or where more than one logger is deployed within a 20 km radius

dipperLog_Reel

Reel Version: Portable

  • Easy portability from well to well for short term monitoring or pump testing
  • Downloading and re-programming can be done without removing the logger from the well
  • Real time readings are available with this option
  • Vented version available (barLog NANO not needed)

Accessories and options

PC Communication Cable – PN# 5009
Software – PN# 5008

The PC Communication Cable is needed for setup, downloading and re-programming of the dipperLog NANO to a computer. The software comes included or is available for downloading from our website. One PC communication cable required for each PC user.


barLog NANO – PN# 5116

A barometric logger is used to automatically compensate readings stored on the dipperLog NANO for changes in barometric pressure (for non-vented version). The barLog NANO is recommended for long term monitoring or where more than one logger is deployed within a 20 km radius.


tapNtell Surface Mount Display – PN # 5020

The tapNtell is a surface mount weather resistant display accessory for the dipperLog NANO well head readout version. The conical connector end of the tapNtell is attached to the direct read well head and the surface mount display unit can be attached to the side of the casing, fence or pump house (any solid surface). The tapNtell provides an instant real time reading of water level and temperature with a tap of a finger.


showNtell Hand Held Display – PN# 5018

The showNtell is a portable hand held display unit for the dipperLog well head readout version. The showNtell can be carried from well to well, to give an instant real time reading of water level and temperature by simply plugging into the direct read well head. The showNtell does not download or store the data from the logger.


SDI-12 Interface Cable – PN# 5021

The SDI-12 system enables the dipperLog NANO data to be accessed from remote locations by a central computer base without site visits. The sensors can be interchanged without reprogramming the data recorder with calibration or other information. The power is supplied to the sensors through a third party device that enables telemetric data readings.
Operating Voltage (DC) :: 7.5 – 35 VDC
Supply Current (Stand-by) :: 10µA
Supply Current (Active) :: 1.5mA

dipperlog Nano B10m/30ft
dipperlog Nano C30m/100ft
dipperlog Nano D60m/200ft
dipperlog Nano E120m/400ft
  • This field is for validation purposes and should be left unchanged.