All products

This range of products is what sets us apart, and has resulted in government awards for innovation & sustainability. Add sustainability to your monitoring well installations, and reduce your plastic waste footprint.

  • The Nondo Mini monitoring well cover is our budget bolt-down, flush mounted well cover. It is designed to be used for monitoring wells or for soil vapour installations. With the bolts outside the inner working space, the Nondo Mini gives you maximum internal room for such a small cover. Features:
    • 2 counter-sunk flush bolts to reduce the risk of trip hazards, as there are no protruding bolt heads
    • High strength cast iron in black epoxy
    • White powder coated lid
    • Large internal opening of 124mm (98mm Bolt head clearance)
    • Small 150mm outside diameter
    • Ideal for standard 50mm monitoring wells or soil vapour implants
     
  • A better designed well cover using recycled plastic for sustainability The Nondo Eco 180 well cover is designed with sustainability in mind. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Nondo Eco 180 is made entirely from recycled plastic and has been tested to meet load bearing requirements for traffic suitability for Australian Standard AS3996 Class D.
    • One piece gasket seals both the lid and around bolt holes heads to prevent surface water ingress, and completely seals the well
    • 2 stainless steel bolts, counter sunk with 8mm hex for secure lid clamp down
    • 180mm diameter OD, large 146mm ID, 122mm between bolt holes
    • High strength recycled plastic (HDPE & Delrin) is resistant to petroleum products
    • Unlike steel, recycled plastic will never rust
    • Lower cost than traditional cast iron covers
    • Light weight only 1.2kg but rated for heavy trucks
    • Load tested to AS3996 Class D traffic rating
    • Ideal for 50mm monitoring wells
    • The all recycled plastic Eco180 will never rust leaving your installation work always looking good
    • No more finger crushing under heavy lids, the Eco180 lid is lightweight with no sharp edges
  • A medium sized well cover with some big features The Nondo180 monitoring well cover contains a high quality machined cast iron lid and base, with a strong plastic skirt. It is ideal for 50mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D. The small 180mm OD makes it ideal for drillers who typically use a 200mm concrete corer.
  • A Solution for Legacy Covers The universal FB180 lid is designed to fit legacy well covers from other manufacturers which are no longer in production. This includes the 'EE' FB180, and other similar covers. Sometimes lids can go missing or get broken on site over the years. Rather than breaking up the concrete to install a new cover, often involving costly traffic management, you can now simply replace the lid. Suitable bolts and an oring is also supplied with the lid. Please note it is not a replacement lid for our Nondo covers.
  • A Class E Rated Cover for Heavy Duty Applications The Nondo CE180 monitoring well cover is an all cast iron, 'Class E' rated well cover, designed for extra heavy duty applications. It is ideal for 50mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D & Class E. The small 180mm OD makes it ideal for drillers who typically use a 200mm concrete corer. The CE180 has two new concepts for groundwater monitoring well covers:
    • A special shaped skirt to allow a wider concrete support lip and with a larger opening than comparable covers of similar diameter (116mm opening)
    • Bottom sealed bolt holes with removable grub screws for easy bolt hole cleaning if necessary. This ensures ultimate sealing from surface water ingress
     
  • A Class E Rated Cover for 100mm Wells The Nondo200 contains high quality machine cast iron lid and base, with a strong plastic skirt. It is ideal for 100mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class E, which is typically for heavy duty applications. The large 250mm OD, 200mm ID (164mm between bolt holes) makes the Nondo200 ideal for remediation wells, or in situations where a 'GasClam' sensor is to be installed.
  • Simply the best way to manage tubing for low-flow groundwater sampling

    • The Rapid Reel is a simple cardboard tubing dispenser for our biodegradable tubing for low-flow sampling
    • Low-flow sampling has just been made easier
    • Simply connect the tubing to your sampling pump then deploy down the well, letting the tubing flow easily out of the Rapid Reel box
    • Clean and simple
    Testimonials:

    "I used the rapid reel last time I was groundwater sampling and thought it was great. Made life so much easier, especially on the deep wells." (Samantha Walsh - Landserv)

    “I have to say, when I saw the rapid reel on your website, memories sprung to mind of countless times spent fighting soggy cardboard reels and unruly tubing. The Rapid Reel did live up to my expectations. It definitely helped keep my ute/workspace tidier, and it was quicker and easier to reel out the quantity I needed." (Anonymous - Ventia)
  • Is sampling groundwater responsibly important to your business? ...then switch to 'BioTubing'. Our landfill-biodegradable tubing helps minimise plastic waste build-up in our landfills. BioTubing is made from landfill-biodegradable* LDPE (low density polyethylene) or HDPE (high density polyethylene), and will only start to biodegrade once in a microbe rich environment such as a landfill. It does not require high oxygen or temperature to biodegrade such as in a commercial compost. BioTubing enables you to achieve high sampling integrity plus operate more sustainably. Bonded Tubing for Low-Flow Sampling Our bonded tubing has the 1/4″ and 3/8″ tubes bonded together with a thin bridge and conveniently packaged on a 100m spool. The air and water lines have been bonded during the extrusion (manufacturing) process, and can be separated easily in the field to connect to a pump and controller fittings. It is recommended to scrape the bonding bridge clean with a knife to ensure a perfect seal. Many people prefer using bonded tubing as it can simplify pump deplyment and handling, and it can reduce the possibility of getting pumps stuck. The easiest way to manage your bonded tubing during pump depolyment, sampling, and storage, is by using the Rapid Reel tubing dispenser. Ultra-Clean BioTubing Our BioTubing has been independently tested for any leaching of 58 VOCs and 101 SVOCs.  The VOCs were tested using USEPA 8260B process and the semi VOCs via USEPA 8270. After tumbling for 18 hours the tubing showed 'non detect' on all the compounds analysed for. These compounds included Phthalates and PAHs. Data available on request. Waste Plastic Facts
    • In Australia alone over 1.5 million tons of plastic waste is disposed of each year, approximately 30 million tons in the USA, and about 5 million tons in the UK
    • Unfortunately most of this goes to landfill with only a small percentage being recycled
    • The use of plastic in western Europe and Australia is growing by about 4% each year
    • Plastic can take up to 500 years to decompose
    • Nearly every piece of plastic ever made still exists today
    • By using BioTubing and other landfill-biodegradable products you are helping to reduce the amount of plastic waste build-up in our landfills
    *Biodegradation has been verified by independent laboratory using ASTM D5511 for anaerobic landfill conditions. Independent laboratory testing confirms that our BioTubing is PFC/PFAS-free, based on analysis for 28 different PFCs at extremely low detection limits. For sampling on PFAS sites HDPE tubing is often prefered. HDPE tubing is available in 1/4", 3/8", and 5/8" OD sizes. Click the 'Ordering Information' tab to see all available options for BioTubing.
  • A Large Well Cover with Cast Iron Lid The Nondo Maxi 320 monitoring well cover is a large flush-mounted well cover with a cast iron lid and base, and is ideal for 100mm or larger monitoring well installations. The 337mm (OD) diameter cover is secure with 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be also levered up with a screwdriver. Due to its weight, we have designed a lifter which allows the lid to be removed safely from the base (see video below).
  • A lower cost Class B option

    The Nondo Maxi 320 - Class B monitoring well cover is a large flush-mounted well cover with a cast iron lid and base, and is ideal for 100mm or larger monitoring well installations. The Nondo Maxi 320 - Class B has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class B. Please note that it is not suitable for road traffic. The 337mm (OD) diameter cover is secure with 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be also levered up with a screwdriver. Due to its weight, we have designed a lifter which allows the lid to be removed safely from the base (see video below).
  • A Large Well Cover with Non-Metallic Lid The Nondo Maxi SMC well cover has a non-metallic lid, making it ideal for wells with instrumentation inside requiring data transmission through the lid, such as a telemetry system. It has an SMC (sheet moulding compound) lid, smc base ring, and a sheet metal skirt. The traditional looking 2-bolt design has a completely sealed lid with a unique one piece gasket to prevent any surface water ingress, and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D. The 337mm diameter cover has an anti-slip dimpled surface on the lid, 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be levered off with a screwdriver. Optional add on: Nondo Safety Lifter Use the Nondo Safety Lifter tool to safely remove and reinstall the heavy lid and to avoid crushed fingers.  
  • A lower cost Class B option **Please note this well cover is a Class B well cover that is not suitable for road traffic.** The Nondo Maxi SMC B well cover has a non-metallic lid, making it ideal for wells with instrumentation inside requiring data transmission through the lid, such as a telemetry system. It has an SMC (sheet moulding compound) lid, a cast iron base ring, and a plastic skirt. The traditional looking 2-bolt design has a completely sealed lid with a unique one piece gasket to prevent any surface water ingress, and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class B. The 337mm diameter cover has an anti-slip dimpled surface on the lid, 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be levered off with a screwdriver.
  • Silicone Peristaltic Tubing is flexible and soft, making it suitable for peristaltic pumps. FieldTech Solutions Peristaltic Silicone Pump tubing is available in 15 m individually wrapped coils, available in these sizes:
    • 1/8" ID / 1/4" OD, 15m roll
    • 4.8mm ID x 9.5mm OD, 15m roll, for use with Geotech Peristaltic Pump
    • 1/4" ID / 3/8" OD, 15.2m roll
    • 5/16" ID / 1/2" OD (7.9mm ID x 12.7mm OD) 15m roll
  • The Nondo Safety Lifter / Multi Tool enables a safe way to remove our steel well cover lids and comes with all the necessary allen keys for our well covers and TriCap well plug.
  • The BioBailerTM is a quick and easy way to sample groundwater. Simply lower the bailer into your well and it fills with water as it submerses. When you pull up to retrieve the bailer the check-valve closes, trapping approximately 1L of water inside. BioBailersTM are made from landfill-biodegradable* PVC, and will only start to biodegrade once in a microbe rich environment such as a landfill. They do not require high oxygen or temperature to biodegrade such as in a commercial compost. Achieve the same groundwater sampling integrity as non-biodegradable bailers but more responsibly.
    Need to sample LNAPL / PSH? The easiest and most cost effective way is with the Hydrocarbon only or HC BioBailers. HC BioBailersTM allow you to collect floating LNAPL / PSH from a well, without collecting water. The ball valve is denser than LNAPL but lighter than water so it pushes water out of the bailer while keeping the LNAPL. These bailers also have a wider mouth than regular bailers, allowing you to collect more LNAPL with each bail. Like all BiobailersTM they are landfill-biodegradable.
  • SD400 - A Large Well Cover for Remediation The SD400 Cover is designed mainly for remediation work where bulky equipment may need to be around the well head. This large cover with a hinged lid offers wide access, with an easy lid opening. It can be ordered with or without a sheet metal skirt fitted.
    • 600mm diameter opening
    • 850mm overall diameter
    • All ductile iron cast construction with sheet metal skirt (500mm long)
    • Hinged lid requires only 1 key to lift up
    • Designed to be cemented into the ground flush
    • Class D400 load rating, (40 ton load)
     
  • The AquaPore inline filter is the world's first biodegradable filter capsule. Having the same special patented additive as all our other landfill biodegradable products, the AquaPore filter is a disposable plastic filter which will biodegrade when discarded to a landfill. It is especially convenient when used with low-flow groundwater sampling but can also easily be used with a bailer, or with a filter flask for surface water filtering. Use the low-cost filter connectors for an easy way to connect to your low-flow discharge line (3/8" OD). The AquaPore 800 biodegradable filter has a huge 800cm2 capacity to handle water with high turbidity, while the AquaPore 500 has a 500cm2 capacity for medium turbidity. Both filters have the same proprietary additive we use in our other biodegradable products to make them landfill biodegradable. It has been designed specifically for the preparation of groundwater samples for dissolved metals analysis and for filtering large volumes of turbid groundwater. The AquaPore filter has been lab tested and rinsate verified for 66 trace elements complying with ANZECC recommendations.
  • Low-Flow Sampling has been the preferred method of choice for many years now in Australia for groundwater sampling. Now you can use disposable bladders responsibly by choosing our landfill biodegradable bladders. Fieldtech Solutions has developed landfill-biodegradable concertina style bladders, and also tube style bladders for 2 of the most popular low-flow groundwater sampling pumps. These bladders have the same biodegradable additive as our other disposable sampling products so that they will biodegrade once disposed to a landfill. *Concertina style bladders now also available in HDPE*
  • The QED Soil Hydrocarbon Analyser is a total organic hydrocarbon in soil and groundwater analyser that can accurately analyse both soil samples and water samples on site. Suitable for direct on-site detection and analysis, it can be synchronized with the on-site investigation and sampling team or in the field. During excavation or in the early stage of pollution, quickly determine the source of gasoline (GRO) or diesel (DRO) or other oil pollution. The QED Hydrocarbon Analyser can reliably identify petroleum hydrocarbon in the sample, as it uses the same solid state micro-spectrometers used by NASA to provide unrivalled accuracy in identifying petroleum hydrocarbons and PAHs. The QED Soil Hydrocarbon Analyser can also solve the error of interfering substances caused by natural plant corruption in current laboratory analysis methods. The QED Soil Hydrocarbon Analyzer can reduce the laboratory analysis costs and provide a faster and more convenient quick screening qualitative and quantitative method on site. Watch video demonstation:  
  • Landfill-biodegradable nitrile gloves can be recycled or disposed of in the general rubbish bin. Once disposed to landfill, biodegradation is accelerated approximately 90%+ faster conventional nitrile gloves, producing an organic matter (a natural fertiliser) and no microplastics. For further information click here.
  • These general multipurpose gloves are suitable for multiple applications and trades including gardening, parts handling and tool operations. Reduced thickness ensures optimum tactility when working on delicate projects, provides comfort and flexibility during extended wear. These reusable landfill biodegradable multipurpose gloves can be disposed of in the general rubbish bin, and once disposed to landfill, biodegradation is accelerated approximately 90% than conventional multipurpose gloves, producing an organic matter (a natural fertiliser) and no microplastics. For further information click here.  
  • Landfill-biodegradable nitrile disposable gloves that provide comfort, dexterity and protection from chemicals. Once these landfill-biodegradable nitrile gloves are disposed of to landfill, biodegradation is accelerated approximately 90%+ faster than conventional nitrile gloves, producing an organic matter (a natural fertiliser) and no microplastics. *Biodegradation has been verified by independent laboratory using ASTM D5511 for anaerobic landfill conditions.
  • Landfill-biodegradable nitrile disposable gloves that provide comfort, dexterity and protection from chemicals. *Biodegradation has been verified by independent laboratory using ASTM D5511 for anaerobic landfill conditions.
  • Low Cost, No Purge Groundwater Sampler These types of samplers are fast becoming a popular method for groundwater sampling on many Australian sites. Sleeve samplers make groundwater sampling a simple, three-step operation that can be more effective than purging or low-flow sampling. The low-cost, disposable sleeve captures a core of water from any discrete interval in the screened portion of the well with no change in water level and minimal disturbance to the water column. The sleeve is sealed except during sample collection, then re-seals itself, assuring that a formation quality sample is recovered. The tripod stand option provides a convenient place to hang a full sampler while filling sample bottles. Independent laboratory testing confirms that sleeve samplers are PFC/PFAS-free, based on analysis for 28 different PFCs at extremely low detection limits.
  • Disposable Bailer Cord Our disposable bailer cord is mainly used to deploy bailers and sleeve samplers. Made from polypropylene, it is well suitable for all types of ground water sampling. The 2.5mm diameter twine is packaged in a convenient 100m spool and also made in Australia. It has a manufacturers stated break load of approximately 195kg, so can be used for a range of applications.
  • Biodegradable Cleaning Concentrate Decon 90 is a highly effective decontamination and cleaning liquid which is also biodegradable. It can be used to clean pumps, bailers, tubing, soil augers, or any sampling equipment where cross-contamination between sampling locations is a concern. Decon 90 is highly effective on petroleum contamination such as fuels and oils, but also Strontium 90, Iodine 131, Carbon 14, Phosphorus 32, Au 198, Hg 203, Translutonium, Tantalum and radiocarbon are all handled by Decon 90. It also caters for a wide range of problem contaminants including: Abrasives, agar algae, apiezon get bacteria, blood, distillation residues, latex, protein complexes, pus, tar, sera, silicone, grease and oil, reagents and more. Download MSDS
  • Sterile-filter and store 150 mL up to 1000 mL of cell culture media using trusted Stericup® filter units, which include a bottle-top filter and a receiving flask, and Steritop® bottle-top filters.

  • Biodegradable Cleaning Concentrate Quantumclean is a highly effective decontamination and cleaning liquid which is also biodegradable. It can be used to clean pumps, bailers, tubing, soil augers, or any sampling equipment where cross-contamination between sampling locations is a concern. Quantum clean can also be used to clean radioactive contamination. Quantumclean is a concentrated mixture of surfactants, chelating agents, stabilising agents and alkali salts in aqueous solution. The mixture is non-flammable, completely water miscibleand biodegradable. Quantum clean does not containphosphates or poly-fluoroalkyl substances.
  • Turn your BioTubing into a groundwater pump Waterra footvalves or inertial pumps have long been a reliable and effective way to sample groundwater. They consist of a one-way checkvalve which connects to a length of HDPE BioTubing. Oscillating the tubing up and down in the well produces a flow of water. The tubing can also be connected to external pumps such as the Waterra Powerpack or PowerPump. Waterra footvalves can be a great sampling solution for narrow diameter wells. Fieldtech Solutions stock a range of the most popular sizes such as the D25, D32, and D16 footvalves. Each of these can connect to our BioTubing which allows it to function as a manual groundwater pump.  
  • The InsiteIG Portable Meter is a unique instrument that combines advanced electronics with exceptional functionality and ease of use. The meter will accept any standard portable DO, SS, pH, or ORP sensor and will automatically configure itself for the correct operation. The quick-disconnect, mil-spec connectors allow for quick sensor swaps. The meter includes a 250 point data logger that records sensor type, sensor reading, date, time, and location. The included Portalog software offers several sort options to customize the downloading and reporting of collected data. The rechargeable batteries allow for 8+ hours of use between charges.

    IPM Display

    The InsiteIG PortaCaddie is an optional organizational tool, available to purchase with each sensor, that captures the meter along with the sensor and cable. The PortaCaddie is designed to manage the cable to eliminate tangles while using the system in the field. The meter, sensor, and cable are retained securely during transport and are easily deployed at the desired test location. The rugged design was built specifically for the rigors encountered by field instrumentation. The PortaCaddie was designed to offer a level of protection to the meter, sensor, and cable.

    Compatible sensors for the IPM

    Portable DO Sensor ( PDO) The Portable Dissolved Oxygen sensor incorporates optical fluorescent technology, solid state electronics, and a unique side mount element. The InsiteIG PDO sensor is the only portable optical DO sensor that does not require expensive replacement caps. Nitric Oxide does not interfere with the InsiteIG portable sensor. PDO Sensor
    • Measuring Range: 0 to 25 ppm
    • Accuracy: 1% of the reading or .05 ppm, whichever is greater
    • Repeatability: 0.01 ppm
    • Response Time: 95% in under 60 seconds
    • Resolution: 0.01 ppm below 4.00, 0.1 ppm above 4.0
    • Drift: less than 1% per year
    • Temp. Range: 0°C to 60°C
    • 20ft sensor cable
    • sensor connector
    Portable Suspended Solids Sensor ( PSS ) The Portable Suspended Solids Sensors incorporate near infrared technology to provide increased dependability of the reading when color changes in the solids occur. Fast, accurate solids readings. There are two sensor ranges available. PSS Sensor
    • Measuring Range: 0 to 30,000 mg/l total suspended solids
    • Accuracy: +/- 5% of the reading or +/- 100 mg/l whichever is greater
    • Repeatability: +/- 1% of the reading or +/- 20 mg/l whichever is greater
    • Response Time: 95% in under 60 seconds
    • Resolution: 1 mg/l below 1000 mg/l, 10 mg/l from 1001 to 9999 mg/l, 100 mg/l above 10,000 mg/l
    • Drift: less than 1% per year
    • Temp. Range: 0°C to 60°C
    • 20ft sensor cable
    • sensor connector
    PEH51 - Portable Holder (PEH) with Model 51 pH Electrode The Portable Electrode Holder (PEH) with Model 51 replaceable pH Electrode cartridge comprise the pH sensor, which incorporates embedded electronics, custom geometry, and a field proven cartridge. The embedded electronics in the PEH Holder includes a built-in electrically isolated preamp, which results in reliable digital communications and temperature compensation circuitry. Our flat glass / double reference junction construction yields a field proven cartridge producing long-lasting reliable measurements. PEH51 Sensor
    • Measuring Range: 2 to 12 pH
    • Temp. Range: 10°C to 60°C
    • 20ft sensor cable
    • sensor connector
    PEH52 - Portable Holder (PEH) with Model 52 ORP Electrode The Portable Electrode Holder with Model 52 replaceable ORP Electrode cartridge comprise the ORP sensor, which incorporates embedded electronics, custom geometry, and a field proven cartridge. Our flat glass / double reference junction construction, yields a field proven cartridge producing long-lasting reliable measurements. The embedded electronics in the PEH Holder includes a built-in electrically isolated preamp, which results in reliable digital communications and temperature measurement circuitry. PEH52 Sensor
    • Measuring Range: +/- 2000mV
    • Temp. Range: 10°C to 60°C
    • 20ft sensor cable
    • sensor connector
  • An environmental monitoring well cap or plug made from post-consumer recycled plastic for sustainability. The TriCap provides:
    • Strong protection for your monitoring wells
    • Self locking option with additional stainless steel security bolt, using a special key tool or allen key
    • Hanger cable holes on bottom end of shaft
    • Fully sustainable, made from recycled plastic waste
    • Wide rubber ring provides a water tight seal
    • Also available in orange
  • The TriCap-GAS has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or  suitable pump. The TriCapGas can also be locked in place with a padlock or by using a security screw or both for extra security. The TriCap has a partially hollow shaft that intersects a horizontal side hole near the bottom. This allows the well gas to be drawn in through the side hole and out the top. The side hole also serves to hang sampling or monitoring devices off the bottom of the cap while at the same time gas samples can be taken out through the shaft and out the gas quick connect fitting.
  • Landfill Leachate, and Remediation Pumps: - Fully Automatic, Float Actuated Pumps The Viridian range of pumps (VP Pumps) are designed specifically for pumping landfill leachate, landfill gas condensate and contaminated groundwater. As no down-well level control device is required, the VP pumps lend themselves to being part of a multi-well pumping system. This makes overall system control very simple. With minimal training, the site personnel quickly become confident with both pump and system. Available in a range of sizes and variations, and capable of discharging up to 1.1 litres of liquid per cycle. The bottom-filling versions are specifically designed for the harsh conditions of pumping landfill leachate. Available as a top loading version, for groundwater remediation applications, as well as a short version, and the 'LDD' (low drawdown) when minimum liquid head is vital. The VP2 and VP3 range has a reduced discharge capacity but it is ideal for smaller borehole sizes. As the VP pumps are driven by compressed air, a multi-well system would have an air-main connecting each pump - a far safer power source than electricity cables and less costly. VP Pumps also do not require an external form of control. Pulse Counters, for volume and flow rate measurement also available. Download Brochure
    VP Pumps Range

    VP Pumps Range

  • The Hydrolift is a portable, 240v operated electric device that is used to automate the operation of the Waterra Pump System. This actuator is perfect for purging and sampling 50mm diameter monitoring wells up to 60m deep. In special circumstances it can lift up to 90m. This electrical Tubing Actuator is optimized to operate with the Standard Flow System up to its maximum effective depth and will operate with the High Flow System up to a depth of 45m. This Tubing Actuator is the ideal choice for the frequent user of the Waterra Pumping System with moderate to extreme pumping requirements (Low, Standard and High Flow). Using the Hydrolift will result in a big boost to your field sampling program. The Hydrolift is powered by a 3/4 horsepower (560 watts) electric motor and generates a 4 inch (10 cm) stroke at up to 140 cycles per minute. The Hydrolift weighs about 16 kg and requires an electrical power supply of at least 1000 watts. *Please note the Hydrolift requires a generator to power it. See image 2 for an animation on how the system works.
  • The Waterra PowerPack PP1 provides the mechanical actuation for pumping with inertial pumps to depths of over 60m, in a fully portable, single operator power unit. At 13 kg, the PowerPack PP1 provides outstanding pumping performance. The PP1 is powerful enough to lift water from over 60m depth using the Standard Flow System, and is so compact that it fits onto a back-pack frame. The PowerPack PP1 incorporates clamps for Waterra High Flow and Standard tubing sizes (adaptors are available for smaller tubes). A Honda GX-25 series, 1.0 horsepower, 4 stroke, gasoline motor powers this device, which can run for approximately 1 hour without refuelling.
  • The WC100GAS has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. The WC100Gas can also be locked in place with a padlock or by using a security screw or both for extra security. It has a large wing nut, designed to make it easier to tighten or release the plug. It comes with a ring below so you can hang/attach tubing, skimmers or sleeve samplers in the well.
  • The WC25Gas has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump.
  • Bioremediation Products Fieldtech Solutions is proud to represent EOS Remediation in Australia. EOS Remediation is the leading provider of bioremediation products that re-engineer the groundwater environment, transforming contaminants into non-toxic end products. EOS Remediation’s products are ecologically sustainable (USDA Certified BioPreferred Products), and cost-effective with proven results. Most of these products are being manufactured locally here in Australia. Their diverse family of products, driven by extensive research and development, are available to meet a variety of project needs. If you have a current bioremediation project, and you are you looking to calculate the volume of EOS product required, we request that you please fill in the Site Evalution Form and email back to us so we can help. Not all fields may be known but please fill in as much information as you can. Download Site Evaluation Form
  • These convenient socks pre-filled with approximately 312.5 g of EOx® Powder. They are 38mm diameter, suitable for 50mm wells or larger. EOx® is a granular powder of calcium peroxide that provides slow and steady oxygen release for long-term aerobic biodegradation. Suitable for enhanced aerobic biodegradation of BTEX, PAHs, DRO, MTBE, VC and other complex contaminants in soil and groundwater.    
  • The Mityvac Silverline Hand Pump can be used for filtering water samples, using either vaccum or pressure to move the sample through the filter. Most commonly they are used on the vaccuum setting in conjunction with the Stericup filters.
  • The TriCap-LOG has been specifically designed for use with submersible groundwater level logging devices. Just like the TriCap-GAS, the hollow shaft intersects a horizontal side hole through the shaft near the bottom. An elbow fitting installed in the top enables the well to be vented to the atmosphere. Attach optional tubing to allow the vent port to be raised up above any surface water and prevent it from flowing into the well through the vent. A stainless spring clip is also provided for easy logger attachment. The Tricap-Log is the perfect choice for use with submersible groundwater logging devices.  It features an elbow fitting which vents the well to atmosphere, and a unique stainless spring clip for easy logger attachment. The TriCap is made from recycled plastic for sustainability and enables a groundwater monitoring well to be sealed and locked.
  • The 100mm well plug is manufactured from a recycled composite glass filled polymer that will not corrode, and is stronger than steel, pound for pound. The  center locking mechanism allows a padlock to be secured in a variety of positions, offering more flexibility in applications with limited space. Constructed of recycled composite glass-filled polymer which is stronger than steel pound for pound, the 100mm well plug is designed for years of worry-free use. The wing nut design with a recessed grip allows a padlock (not included) to be easily installed. The 100mm well plug has a tethering attachment at the base for use with a variety of instruments, features no metal parts, and can be disassembled for easy decontamination. The standard well plug and GasCap is available for 100mm wells.  
  • Mi415 Turbidity Meter

    Turbidity refers to the concentration of undissolved, suspended particles present in a liquid. Turbidity is a measure of the clarity of a sample, and for potable water applications, turbidity is a good indicator of water quality. Turbidity Measurement is achieved by analysing the amount of light refracted from suspended particles such as clay, silt and organic material. By measuring turbidity, by photometric or tube methods, it is possible to estimate suspended solids content.

    The Mi415 has two operating ranges; 0.00 to 50.00 FNU, and 50 to 1000 FNU that can accommodate the most turbid condition you may encounter. The Mi415 is supplied in a hard carrying case, complete with reagents.

  • Our largest standpipe cover is the all recycled plastic SP272. This round standpipe cover has a 250mm internal diameter which means there's even enough room for 150mm PVC well installations. The mottled, multi-coloured look is a result of the post-consumer plastic items being melted together to make a unique and great looking cover. Ideal for landfill or remediation applications where a larger diameter cover is often desired. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical.
  • Made from post-consumer recycled plastic (i.e. bottles and other plastic waste sent for recycling), these stylish upright covers give your monitoring well a professional finish. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Heavy Duty Standpipe Cover range is thick walled (23mm) HDPE (high density polyethylene) to give you a very strong, chemically inert and petroleum resistant well cover. They are available in blue or black with large bright orange reflectors for high visibility.
     

Title

Go to Top