• The FlexiPoint is an end cap designed to be installed in the screen with no need to cut off the female thread. It is made long to reach up inside the pipe ID.
    • Flush with pipe OD, no edges to get caught
    • Pointed tip to drive down into bottom of your well if needed
    • Made from recycled plastic, giving you more sustainability
    • Fits class 18 pipe as standard
    • Also fits Class 12 or USA Sch 40 pipe (if oring is added)
    • Made in Australia
    • For 50 mm pipe
     
    FlexiPoint Brochure

  • The TriCap is a new kind of well cap or plug made from post-consumer recycled plastic (i.e. plastic such as bottles and other waste returned for recycling) for sustainability. The FTS TriCap provides:
    • Strong protection for your monitoring wells
    • Self locking option with a stainless steel security bolt, using a special key tool or allen key
    • Hanger cable holes on bottom end of shaft
    • Fully sustainable, made from recycled plastic waste
    • Wide rubber ring provides a water tight seal
    • Gas Extraction version available
    • Unique version for water level logging devices also available, see details below
    • Now also available in orange
    The Tricap is currently only available to suit 50mm monitoring wells. However we stock other well caps in 25mm and 100mm sizes. These are also made from recycled plastic. See Ordering Information below for details.
  • A medium sized well cover with some big features The 180 Nondo cover contains a high quality machined cast iron lid and base, with a strong plastic skirt. It is ideal for 50mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D. The small 180mm OD makes it ideal for drillers who typically use a 200mm concrete corer.  
  • At last, disposable tubing for groundwater sampling which is landfill biodegradable! Landfill Biodegradable - Responsible use of Disposable Plastic Is sampling groundwater responsibly important to your business? ...then switch to 'BioTubing'. Our landfill-biodegradable tubing helps minimise plastic waste build-up in our landfills. Independent laboratory testing confirms that our BioTubing is PFC/PFAS-free, based on analysis for 28 different PFCs at extremely low detection limits. For sampling on PFAS sites HDPE tubing is often prefered. HDPE tubing is available in 1/4", 3/8", and 5/8" OD sizes. Click the 'Ordering Information' tab to see all available options for BioTubing.
  • A Class E Rated Cover for Heavy Duty Applications The CE180 Nondo cover is an all cast iron, 'Class E' rated well cover, designed for extra heavy duty applications. It is ideal for 50mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D & Class E. The small 180mm OD makes it ideal for drillers who typically use a 200mm concrete corer. The CE180 has two new concepts for groundwater monitoring well covers:
    1. A special shaped skirt to allow a wider concrete support lip and with a larger opening than comparable covers of similar diameter (116mm opening)
    2. Bottom sealed bolt holes with removable grub screws for easy bolt hole cleaning if necessary. This ensures ultimate sealing from surface water ingress
     
  • A better designed well cover using recycled plastic for sustainability The Eco Nondo 180 well cover is designed with sustainability in mind. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Eco Nondo 180 is made entirely from recycled plastic and has been tested to meet load bearing requirements for traffic suitability for Australian Standard AS3996 Class D. Features:
    • One piece gasket seals both the lid and around bolt holes heads to prevent surface water ingress, and completely seals the well
    • 2 stainless steel bolts, counter sunk with 8mm hex for secure lid clamp down
    • 180mm diameter OD, large 146mm ID, 122mm between bolt holes
    • High strength recycled plastic (HDPE & Delrin) is resistant to petroleum products
    • Unlike steel, recycled plastic will never rust
    • Lower cost than traditional cast iron covers
    • Light weight only 1.2kg but rated for heavy trucks
    • Load tested to AS3996 Class D traffic rating
    • Ideal for 50mm monitoring wells
    The all recycled plastic Eco180 will never rust leaving your installation work always looking good. No more finger crushing under heavy lids, the Eco180 lid is lightweight with no sharp edges.
  • SD400 - A Large Well Cover for Remediation The SD400 Cover is designed mainly for remediation work where bulky equipment may need to be around the well head. This large cover with a hinged lid offers wide access, with an easy lid opening. It can be ordered with or without a sheet metal skirt fitted.
    • 600mm diameter opening
    • 850mm overall diameter
    • All ductile iron cast construction with sheet metal skirt (500mm long)
    • Hinged lid requires only 1 key to lift up
    • Designed to be cemented into the ground flush
    • 40 ton load rating
     
  • The Mini Nondo is our budget bolt-down, flush mounted well cover. It is designed to be used for monitoring wells or for soil vapour installations. With the bolts outside the inner working space, the Mini Nondo gives you maximum internal room for such a small cover. Features:
    • 2 counter-sunk flush bolts to reduce the risk of trip hazards, as there are no protruding bolt heads
    • High strength cast iron in black epoxy
    • White powder coated lid
    • Large internal opening of 124mm (98mm Bolt head clearance)
    • Small 150mm outside diameter
    • Ideal for standard 50mm monitoring wells or soil vapour implants
     
  • Simply the best way to manage tubing for low-flow groundwater sampling

    The Rapid Reel is a simple cardboard tubing dispenser for our biodegradable tubing for low-flow sampling. Low-flow sampling has just been made easier! Simply connect the tubing to your sampling pump then deploy down the well, letting the tubing flow easily out of the Rapid Reel box. Clean and simple. Testimonials: "I used the rapid reel last time I was groundwater sampling and thought it was great. Made life so much easier, especially on the deep wells." Samantha Walsh - Landserv “I have to say, when I saw the rapid reel on your website, memories sprung to mind of countless times spent fighting soggy cardboard reels and unruly tubing. The Rapid Reel did live up to my expectations. It definitely helped keep my ute/workspace tidier, and it was quicker and easier to reel out the quantity I needed." Emmylou Cooke - Ventia
  • Extra Large & Traffic Rated With an OD of 350mm the XL Cover is ideal for installations where more room than usual is needed around the well head: for example, remediation work, or where instrumentation needs to be hidden around the top of the well. Features:
    • All cast iron lid and base for strength, with a sheet metal skirt to reduce overall weight
    • Well ID tag on lid
    • Traffic rated design certified by an independent laboratory to meet or exceed H20 and AASHTO M306 roadway loading requirements
    • O-ring sealed
    • Watertight rubber washers around bolts
    • Non-slip surface
    • Compatible with Nondo Safety Lifter (see demonstration video below)
     
  • A Class E Rated Cover for 100mm Wells The 200 Nondo contains high quality machine cast iron lid and base, with a strong plastic skirt. It is ideal for 100mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class E, which is typically for heavy duty applications. The large 250mm OD, 200mm ID (164mm between bolt holes) makes the 200 Nondo ideal for remediation wells, or in situations where a 'GasClam' sensor is to be installed.
  • Landfill Biodegradable Bailer Landfill Biodegradable - Responsible use of Disposable Plastic The BioBailerTM is a quick and easy way to sample groundwater. Simply lower the bailer into your well and it fills with water as it submerses. When you pull up to retrieve the bailer the check-valve closes, trapping approximately 1L of water inside.
  • Landfill Biodegradable Bladders are now available! Low-Flow Sampling has been the preferred method of choice for many years now in Australia for groundwater sampling. Now you can use disposable bladders responsibly by choosing our landfill biodegradable bladders. Fieldtech Solutions has developed biodegradable* concertina style bladders, and also tube style bladders for 2 of the most popular low-flow groundwater sampling pumps. These bladders have the same biodegradable additive as our other disposable sampling products so that they will biodegrade once disposed to a landfill. Independent laboratory testing confirms that our bladders are PFC/PFAS-free, based on analysis for 28 different PFCs at extremely low detection limits.
  • Lightweight and Rugged Features:
    • Ideal for 100mm well installations
    • A wider opening (145mm ID) for use with a "Gasclam" or other instrumentation
    • Strong protection for your monitoring wells with a professional, stylist finish
    • High security with one way security screws to deter tampering
    • High visibility yellow colour
    • Safer to use with no sharp steel edges
    • Unlike steel covers will not rust
  • Made from post-consumer recycled plastic (i.e. bottles and other plastic waste sent for recycling), these stylish upright covers give your monitoring well a professional finish. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Heavy Duty Standpipe Cover range is thick walled (23mm) HDPE (high density polyethylene) to give you a very strong, chemically inert and petroleum resistant well cover. They are available in blue or black with large bright orange reflectors for high visibility.
    Download brochure for heavy duty standpipe covers
    The Economy Standpipe Cover range is also available (see yellow pictures to left) in either yellow or blue. These are a thinner walled option for budget limited projects. They have a recycled plastic inner core and a bright yellow outer casing for high visibility.
    Download brochure for economy duty standpipe covers
    The SP155 Standpipe Cover is our largest one yet. With a 145mm ID it is ideal for LFG installations where you would like the option to install a 'Gas Clam' instrument for continuous LFG monitoring.
    Download brochure for SP155
Processing...
Thank you! Your subscription has been confirmed. You'll hear from us soon.
Subscribe to our Newsletter
ErrorHere