-
Made from post-consumer recycled plastic (i.e. bottles and other plastic waste sent for recycling), these stylish upright covers give your monitoring well a professional finish. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Heavy Duty Standpipe Cover range is thick walled (23mm) HDPE (high density polyethylene) to give you a very strong, chemically inert and petroleum resistant well cover. They are available in blue or black with large bright orange reflectors for high visibility.
-
A better designed well cover using recycled plastic for sustainability The Nondo Eco 180 well cover is designed with sustainability in mind. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Nondo Eco 180 is made entirely from recycled plastic and has been tested to meet load bearing requirements for traffic suitability for Australian Standard AS3996 Class D.- One piece gasket seals both the lid and around bolt holes heads to prevent surface water ingress, and completely seals the well
- 2 stainless steel bolts, counter sunk with 8mm hex for secure lid clamp down
- 180mm diameter OD, large 146mm ID, 122mm between bolt holes
- High strength recycled plastic (HDPE & Delrin) is resistant to petroleum products
- Unlike steel, recycled plastic will never rust
- Lower cost than traditional cast iron covers
- Light weight only 1.2kg but rated for heavy trucks
- Load tested to AS3996 Class D traffic rating
- Ideal for 50mm monitoring wells
- The all recycled plastic Eco180 will never rust leaving your installation work always looking good
- No more finger crushing under heavy lids, the Eco180 lid is lightweight with no sharp edges
-
A New Concept for Standpipe Covers - Hidden Hinge Design The 100mm square yellow steel standpipe cover has a unique hidden hinge design which provides a rain proof cover. Traditional looking standpipe covers have hinges which are exposed to the elements and therefore prone to corrosion and eventually seizing up or dropping off. The unique design has addressed this weakness. These low-cost covers have a bright yellow powder coated finish, and are also available as galvanised. -
A medium sized well cover with some big features The Nondo180 monitoring well cover contains a high quality machined cast iron lid and base, with a strong plastic skirt. It is ideal for 50mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D. The small 180mm OD makes it ideal for drillers who typically use a 200mm concrete corer. -
A Class E Rated Cover for Heavy Duty Applications The Nondo CE180 monitoring well cover is an all cast iron, 'Class E' rated well cover, designed for extra heavy duty applications. It is ideal for 50mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D & Class E. The small 180mm OD makes it ideal for drillers who typically use a 200mm concrete corer. The CE180 has two new concepts for groundwater monitoring well covers:- A special shaped skirt to allow a wider concrete support lip and with a larger opening than comparable covers of similar diameter (116mm opening)
- Bottom sealed bolt holes with removable grub screws for easy bolt hole cleaning if necessary. This ensures ultimate sealing from surface water ingress
-
The Nondo Mini monitoring well cover is our budget bolt-down, flush mounted well cover. It is designed to be used for monitoring wells or for soil vapour installations. With the bolts outside the inner working space, the Nondo Mini gives you maximum internal room for such a small cover. Features:- 2 counter-sunk flush bolts to reduce the risk of trip hazards, as there are no protruding bolt heads
- High strength cast iron in black epoxy
- White powder coated lid
- Large internal opening of 124mm (98mm Bolt head clearance)
- Small 150mm outside diameter
- Ideal for standard 50mm monitoring wells or soil vapour implants
-
A Class E Rated Cover for 100mm Wells The Nondo200 contains high quality machine cast iron lid and base, with a strong plastic skirt. It is ideal for 100mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class E, which is typically for heavy duty applications. The large 250mm OD, 200mm ID (164mm between bolt holes) makes the Nondo200 ideal for remediation wells, or in situations where a 'GasClam' sensor is to be installed. -
CETCO Bentonite, Gels, and Cement We now stock bags of bentonite, making it easier to get all your well installation material from the one location. 25kg Bags of bentonite are available in granules or chips. Bentonite tablets and coated slow release tablets are also available for applications where immediate reaction with water is not desired. -
SD400 - A Large Well Cover for Remediation The SD400 Cover is designed mainly for remediation work where bulky equipment may need to be around the well head. This large cover with a hinged lid offers wide access, with an easy lid opening. It can be ordered with or without a sheet metal skirt fitted.- 600mm diameter opening
- 850mm overall diameter
- All ductile iron cast construction with sheet metal skirt (500mm long)
- Hinged lid requires only 1 key to lift up
- Designed to be cemented into the ground flush
- Class D400 load rating, (40 ton load)
-
Screen and Casing Bore Pipe for Monitoring Well Installations Cut your costs for well installation and operate more sustainably on site. Each pair of 3m lengths of pipe is sleeved in biodegradable plastic, which means the sleeve will biodegrade away when disposed to a landfill, allowing you to help reduce the amount of plastic waste build-up. Most environmental screen and casing is wrapped in conventional plastic but this is adding to our plastic waste problem. The FieldTech Solutions Wellscreen is wrapped in biodegradable plastic preventing further plastic waste. We also use biodegradable packing tape in our shipments. 50mm casing and screen is made from uPVC and to class 18 size and is manufactured following the Australian Standard for Monitoring Wells. Each piece has a coarse male/female thread for easy field assembly and is o’ring sealed. Our biodegradable plastic wrapping:- Will only biodegrade once in a microbe rich environment such as a landfill
- Does not require high oxygen or temperature to biodegrade such as in a commercial compost
- Helps you to operate more sustainably
-
Trim your casing below ground level safely and easily These new internal pipe cutters have an ingenious design to ensure a safe, easy, and clean cut without any PVC shavings falling into your monitoring well. The IPC50 and IPC100 are an ingenious design of internal pipe cutter. It uses a replaceable cutting wheel blade to give a clean cut without any shavings. As you tighten the handle and rotate, the cutting wheel pushes against the inside of the casing and cutting cleanly through. The replaceable cutting wheel pushes against the casing from the inside out, and is tightened with each rotation to give a clean and precise cut. Available in sizes to suit 50mm and 100mm casing. -
Suitable for our 100mm PN12 PVC Screen and Casing, these flush-fitting bottom end caps are available with either male or female threads to help minimise your off-cut wastage during 100mm well installations. -
Lightweight and Rugged The SP155 is the largest of our plastic Standpipe Covers. With a 145mm ID it is ideal for LFG installations where using a 'Gas Clam' instrument for continuous LFG monitoring may be desired.- Ideal for 100mm well installations
- Plastic standpipe cover, will not rust
- A wider opening (145mm ID) for use with a "Gasclam" or other instrumentation
- Strong protection for your monitoring wells with a professional, stylist finish
- High security with one way security screws to deter tampering
- High visibility yellow colour
- Safer to use with no sharp steel edges
-
These Standpipe Covers are designed to be simple and robust, with a unique large clearance hinge that will not rust and bind, and an attractive bright blue powder coated finish. A padlock can also be used on the lid for extra security. 3 different sizes to choose from:- SPRB114 - 114mm diameter
- SPRB165 - 165mm diameter
- SPRB219 - 219mm diameter
-
Our range of Premium Graded Sand and Gravel is produced from water washed high purity silica. Dry screening ensures excellent control of Particle Size Distribution. The sand and gravel is tested and controlled to rigorous standards which ensure consistent physical properties resulting in predictable and repeatable performance. Sibelco Australia actively manages a Quality Management System certified to ISO9001:2008. High quality Gravel typically finds use in applications such as water filtration, drilling and flooring. The following typical properties may help you to determine the product which will best suit your application.
We ship all our products with recycable and biodegradable materials.
We ship all our products with recyclable and landfill-biodegradable materials.
We use newspaper as filler and recycled cardboard boxes where possible to replace non-recyclable material.
