The engineered plastic 12 volt submersible centrifugal Tempest/Twister® pump is capable of pumping up to 18m from ground level, and the Super Twister® up to 25m (Depth to Water) by simply connecting to a 12 volt deep cycle battery. They are well suited for continuous sampling and purging of groundwater wells, or Low Flow Sampling by adding the optional controller.
They can also be mounted on a hose reel as indicated by the images.-
These Standpipe Covers are designed to be simple and robust, with a unique large clearance hinge that will not rust and bind, and an attractive bright blue powder coated finish. A padlock can also be used on the lid for extra security. 3 different sizes to choose from:- SPRB114 - 114mm diameter
- SPRB165 - 165mm diameter
- SPRB219 - 219mm diameter
-
Lightweight and Rugged The SP155 is the largest of our plastic Standpipe Covers. With a 145mm ID it is ideal for LFG installations where using a 'Gas Clam' instrument for continuous LFG monitoring may be desired.- Ideal for 100mm well installations
- Plastic standpipe cover, will not rust
- A wider opening (145mm ID) for use with a "Gasclam" or other instrumentation
- Strong protection for your monitoring wells with a professional, stylist finish
- High security with one way security screws to deter tampering
- High visibility yellow colour
- Safer to use with no sharp steel edges
-
Designed for applications such as Aquifer Injection, Groundwater Monitoring, Methane gas control or collection (typical in landfills and mines), Vacuum sampling at or below Leachate pads, Formation pressure monitoring, and Vadose zone sampling and injection. The Environmental Packer is a Fixed-End Style Packer manufactured using either Neoprene, EPDM or Viton® rubber gland element and Type 304 or Type 316 stainless steel.Applications:
- Remediation / Groundwater Injection
- Groundwater monitoring
- Methane gas control or collection in landfills and/or mines
- Monitoring formation pressures
- Vacuum sampling under leachate pads
- Vadose zone sampling and injection
-
-
The water tape2 water level meter is made for drillers, consultants and hydrogeologists that are looking for an economic water level meter that does not lack in quality. The water tape2 provides accurate water measurements without going over budget. The Heron water tape2, an economical water level meter, can be used for measuring both static and drawDown levels in open bodies of water, wells, boreholes and standpipes. This low cost unit with DUAL FUNCTION capability is ideal for every project and budget. The water tape2 manufactured with the white polyethylene tape, reinforced with Kevlar is available in both metric and engineering scale. Unlike some other white tape units, the water tape2 comes with a fully pressure rated probe* and carry bag. -
Measure the pH in soil easily using the Milwaukee Instruments MW101-SOIL pH meter kit. This portable meter is also suitable for use in a wide range of applications such as education, agriculture and horticulture, as well as water and environmental analysis.MW101 performs pH measurements with a 0.01 pH resolution and with manual temperature compensation.The meter is supplied with pH electrode and calibration solutions.
-
Suitable for our 100mm PN12 PVC Screen and Casing, these flush-fitting bottom end caps are available with either male or female threads to help minimise your off-cut wastage during 100mm well installations. -
Mi306 Conductivity / TDS / NaCl / Temperature Professional Portable Meter
Mi306 is a waterproof portable logging microprocessorbased Conductivity / TDS / NaCl / Temperature meter. The autoranging feature of the EC and TDS ranges automatically sets the meter to the scale with the highest possible resolution. The Auto Endpoint (HOLD) feature automatically freezes the display when a stable reading is reached.
The measurements are automatically (ATC) or manually (MTC) compensated for temperature. The temperature coefficient value is user selectable. It is possible to disable the temperature compensation and measure the actual conductivity (NoTC). The Battery Error Preventing System (BEPS) switches the meter off when the batteries are too weak to support proper function. The meter can store measurements in memory by logging function for retrieval at a later time upon user request.
Mi306 also allows data transfer to computer through the RS232 port. Double LCD displays, for simultaneous readings of the specific conductivity and temperature.
-
Conductivity, Temperature & Static Levels The Conductivity Plus enables accurate measurements of conductivity, water levels and temperatures in wells, boreholes, stand pipes and estuaries where salt water intrusion and contamination levels become a concern. Conductivity can be an early indicator of change in a water system due to fluctuations of salinity in water levels. The premium padded carry case comes included to protect your precision instrument from the elements. The high tensile steel core measuring tape is tested for stretch resistance to ASME standards and is ideal for profiling up to 50˚C. An LCD screen displays conductivity values up to 80,000 µS and temperature range from 0˚C – 50˚C. The conductance temperature compensation coefficient is 2.0%. Calibration of the conductivity plus is easy using readily available 1413, 5000, 12880, 111800 uS solutions, and up to 4 calibration points can be utilised. The Conductivity Plus provides a higher range of up to 250,000 μS/cm, which is the highest conductivity range on the market. -
Measures 4 parameters with 1 single probe, offering a combination of pH, Conductivity, total Dissolved solids and temperature measurements. You can select from a range of calibration buffers and also the temperature scale (°C or °F) can be selected. The multi-parameter probe MA851D/1, includes pH/EC/TDS and temperature, all in one rugged handle. Other features include different TDS factors from 0.45 to 1.00, and a range of temperature coefficients (ss) from 0.0 to 2.4% for greater consistency and reproducibility. The Stability Indicator prompts the user when the reading stabilizes. The Auto-Hold Function automatically freezes reading for later viewing. Large and Easy-to-Read display provides simultaneous readings of pH and Temperature or EC/TDS and temperature. -
Measures 4 parameters with 1 single probe. Mi805 offers you a combination of pH, Conductivity, total Dissolved solids and temperature measurements. You can select from a range of calibration buffers and also the temperature scale (°C or °F) can be selected. The multi-parameter probe MA851D/1, includes pH/EC/TDS and temperature, all in one rugged handle. Other features include different TDS factors from 0.45 to 1.00, and a range of temperature coefficients (ss) from 0.0 to 2.4% for greater consistency and reproducibility. The Stability Indicator prompts the user when the reading stabilizes. The Auto-Hold Function automatically freezes reading for later viewing. Large and Easy-to-Read display provides simultaneous readings of pH and Temperature or EC/TDS and temperature.
-
The Shelby sampler is a thin-walled soil sampling system. The system is used to sample soils that are particularly sensitive to sampling disturbance, as it has a very low wall thickness-to-sample area ratio. The sampler consists of a thin walled steel tube whose lower end is shaped to form a cutting edge. Fieldtech Solutions is now stocking U63 and U50 Shelby Tubes and drive heads. Drive Heads are available in AW, AWJ, or NWJ box threads. -
Mi415 Turbidity MeterTurbidity refers to the concentration of undissolved, suspended particles present in a liquid. Turbidity is a measure of the clarity of a sample, and for potable water applications, turbidity is a good indicator of water quality. Turbidity Measurement is achieved by analysing the amount of light refracted from suspended particles such as clay, silt and organic material. By measuring turbidity, by photometric or tube methods, it is possible to estimate suspended solids content.
The Mi415 has two operating ranges; 0.00 to 50.00 FNU, and 50 to 1000 FNU that can accommodate the most turbid condition you may encounter. The Mi415 is supplied in a hard carrying case, complete with reagents.
-
Dissolved Oxygen Smart Sensor The Model 32 is a solid state DO sensor with built-in smarts which outputs to Modbus RTU through RS232 hardware. It is designed to be connected into existing hardware which accepts the Modbus RTU protocol. The Model 32 sensor is extrememly rugged and reliable, utilising solid state technology for DO measurement. “I’m glad we got onto these, they’re great sensors, the M32 we have deployed is running like clockwork.” Lia - Hydrographer. VIC.
