-
The Mityvac Silverline Hand Pump can be used for filtering water samples, using either vaccum or pressure to move the sample through the filter. Most commonly they are used on the vaccuum setting in conjunction with the Stericup filters. -
The InsiteIG Portable Meter is a unique instrument that combines advanced electronics with exceptional functionality and ease of use. The meter will accept any standard portable DO, SS, pH, or ORP sensor and will automatically configure itself for the correct operation. The quick-disconnect, mil-spec connectors allow for quick sensor swaps. The meter includes a 250 point data logger that records sensor type, sensor reading, date, time, and location. The included Portalog software offers several sort options to customize the downloading and reporting of collected data. The rechargeable batteries allow for 8+ hours of use between charges.
The InsiteIG PortaCaddie is an optional organizational tool, available to purchase with each sensor, that captures the meter along with the sensor and cable. The PortaCaddie is designed to manage the cable to eliminate tangles while using the system in the field. The meter, sensor, and cable are retained securely during transport and are easily deployed at the desired test location. The rugged design was built specifically for the rigors encountered by field instrumentation. The PortaCaddie was designed to offer a level of protection to the meter, sensor, and cable.
Compatible sensors for the IPM
Portable DO Sensor ( PDO) The Portable Dissolved Oxygen sensor incorporates optical fluorescent technology, solid state electronics, and a unique side mount element. The InsiteIG PDO sensor is the only portable optical DO sensor that does not require expensive replacement caps. Nitric Oxide does not interfere with the InsiteIG portable sensor.
- Measuring Range: 0 to 25 ppm
- Accuracy: 1% of the reading or .05 ppm, whichever is greater
- Repeatability: 0.01 ppm
- Response Time: 95% in under 60 seconds
- Resolution: 0.01 ppm below 4.00, 0.1 ppm above 4.0
- Drift: less than 1% per year
- Temp. Range: 0°C to 60°C
- 20ft sensor cable
- sensor connector
- Measuring Range: 0 to 30,000 mg/l total suspended solids
- Accuracy: +/- 5% of the reading or +/- 100 mg/l whichever is greater
- Repeatability: +/- 1% of the reading or +/- 20 mg/l whichever is greater
- Response Time: 95% in under 60 seconds
- Resolution: 1 mg/l below 1000 mg/l, 10 mg/l from 1001 to 9999 mg/l, 100 mg/l above 10,000 mg/l
- Drift: less than 1% per year
- Temp. Range: 0°C to 60°C
- 20ft sensor cable
- sensor connector
- Measuring Range: 2 to 12 pH
- Temp. Range: 10°C to 60°C
- 20ft sensor cable
- sensor connector
- Measuring Range: +/- 2000mV
- Temp. Range: 10°C to 60°C
- 20ft sensor cable
- sensor connector
-
Using syringes for groundwater filtration in the field is a popular low-cost option. It can be an ideal choice if you are not using a pump, and have a manual device such as a bailer. When using a syringe 50ml at a time can be pushed through a filter. Small low-capacity filters can be used where turbidity is low. However if turbidity is high then it may be better to use a high capacity filter such as the AquaPore Biodegradable Filter Capsule. Syriges are available in luer-lock, catheter tipped, or eccentric tipped varieties. -
Made from post-consumer recycled plastic (i.e. bottles and other plastic waste sent for recycling), these stylish upright covers give your monitoring well a professional finish. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Heavy Duty Standpipe Cover range is thick walled (23mm) HDPE (high density polyethylene) to give you a very strong, chemically inert and petroleum resistant well cover. They are available in blue or black with large bright orange reflectors for high visibility.
-
A medium sized well cover with some big features The Nondo180 monitoring well cover contains a high quality machined cast iron lid and base, with a strong plastic skirt. It is ideal for 50mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D. The small 180mm OD makes it ideal for drillers who typically use a 200mm concrete corer. -
A Class E Rated Cover for Heavy Duty Applications The Nondo CE180 monitoring well cover is an all cast iron, 'Class E' rated well cover, designed for extra heavy duty applications. It is ideal for 50mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D & Class E. The small 180mm OD makes it ideal for drillers who typically use a 200mm concrete corer. The CE180 has two new concepts for groundwater monitoring well covers:- A special shaped skirt to allow a wider concrete support lip and with a larger opening than comparable covers of similar diameter (116mm opening)
- Bottom sealed bolt holes with removable grub screws for easy bolt hole cleaning if necessary. This ensures ultimate sealing from surface water ingress
-
The Nondo Mini monitoring well cover is our budget bolt-down, flush mounted well cover. It is designed to be used for monitoring wells or for soil vapour installations. With the bolts outside the inner working space, the Nondo Mini gives you maximum internal room for such a small cover. Features:- 2 counter-sunk flush bolts to reduce the risk of trip hazards, as there are no protruding bolt heads
- High strength cast iron in black epoxy
- White powder coated lid
- Large internal opening of 124mm (98mm Bolt head clearance)
- Small 150mm outside diameter
- Ideal for standard 50mm monitoring wells or soil vapour implants
-
CETCO Bentonite, Gels, and Cement We now stock bags of bentonite, making it easier to get all your well installation material from the one location. 25kg Bags of bentonite are available in granules or chips. Bentonite tablets and coated slow release tablets are also available for applications where immediate reaction with water is not desired. -
Suitable for our 100mm PN12 PVC Screen and Casing, these flush-fitting bottom end caps are available with either male or female threads to help minimise your off-cut wastage during 100mm well installations. -
A Large Well Cover with Non-Metallic Lid The Nondo Maxi SMC well cover has a non-metallic lid, making it ideal for wells with instrumentation inside requiring data transmission through the lid, such as a telemetry system. It has an SMC (sheet moulding compound) lid, smc base ring, and a sheet metal skirt. The traditional looking 2-bolt design has a completely sealed lid with a unique one piece gasket to prevent any surface water ingress, and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D. The 337mm diameter cover has an anti-slip dimpled surface on the lid, 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be levered off with a screwdriver. Optional add on: Nondo Safety Lifter Use the Nondo Safety Lifter tool to safely remove and reinstall the heavy lid and to avoid crushed fingers.
-
A Solution for Legacy Covers The universal FB180 lid is designed to fit legacy well covers from other manufacturers which are no longer in production. This includes the 'EE' FB180, and other similar covers. Sometimes lids can go missing or get broken on site over the years. Rather than breaking up the concrete to install a new cover, often involving costly traffic management, you can now simply replace the lid. Suitable bolts and an oring is also supplied with the lid. Please note it is not a replacement lid for our Nondo covers. -
Prepacked Screen for Environmental Monitoring Wells- Great solution for sites prone to collapsing sands
- Ensures accurate placement of filter media across desired interval
- No adapters required, will thread directly onto our casing
- Available in 50mm (PN18), 1.5m lengths
- Male / Female threaded
- Bottom end caps available, including the universal 'FlexiPoint 50'
-
When direct push sampling in sands or loose soils, a core catcher is recommended to be used in the BioLiner, which will stop the soil sample from falling out when retrieving from depth. Our core catchers are 100% recycled plastic and landfill-biodegradable. -
Used during soil vapour monitoring, 3-way and 2-way valves are an ideal addition as part of leak testing and purging.- 3 way valves with 2 Female luer ports and 1 male luer lock
- 2 way valves with 1 Female luer ports and 1 male luer Lock
-
LNAPL Skimming Socks for 50mm Monitoring Wells The easiest way to remove small amounts of fuels from monitoring wells is with these low-cost skimming socks. Each sock holds about 500ml.
Our Products
Copyright © 2024 FieldTech Solutions. All rights reserved.
