-
Suitable for our 100mm PN12 PVC Screen and Casing, these flush-fitting bottom end caps are available with either male or female threads to help minimise your off-cut wastage during 100mm well installations. -
The engineered plastic 12 volt submersible centrifugal Tempest/Twister® pump is capable of pumping up to 18m from ground level, and the Super Twister® up to 25m (Depth to Water) by simply connecting to a 12 volt deep cycle battery. They are well suited for continuous sampling and purging of groundwater wells, or Low Flow Sampling by adding the optional controller.
They can also be mounted on a hose reel as indicated by the images. -
Used during soil vapour monitoring, 3-way and 2-way valves are an ideal addition as part of leak testing and purging.- 3 way valves with 2 Female luer ports and 1 male luer lock
- 2 way valves with 1 Female luer ports and 1 male luer Lock
-
The Heron 4-20mA Pressure Transmitter is easily integrated into an existing SCADA system, digital display and 3rd party data logger. It will provide a continuous, accurate water level reading for a wide variety of applications. A two-wire 4-20mA Pressure Transmitter current configuration is used with the Heron Pressure Transmitter which is the most widely used signal transmission for transducers in industrial environments.- Vented cable provides real time barometric compensation
- Simple two-wire connection
- Output signal is compatible with most telemetry, SCADA and PLC systems
- High noise immunity on long cable runs
- Wide range of supply voltage (7.5VDC-35VDC)
- High accurate water level measurements
- Reverse polarity protected
-
Alconox is a concentrated, anionic detergent for manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Ideal for cleaning contaminants from glassware, metals, plastics, ceramic, porcelain, rubber and fiberglass. Excellent replacement for corrosive acids and hazardous solvents. FSANZ Authorized. USDA authorized. Dilute 1:100. pH 9.5
Used to clean: Groundwater and Soil Sampling equipment,, Healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, sampling apparatus, catheters, tubing, pipes, radioactive contaminated articles, optical parts, electronic components, pharmaceutical apparatus, cosmetics manufacturing equipment, metal castings, forgings and stampings, industrial parts, tanks and reactors. Authorized by FSANZ and USDA for inspected meat and poultry plants. Passes inhibitory residue test for water analysis. Used to remove: Soil, grit, grime, buffing compound, slime, grease, oils, blood, tissue, salts, deposits, particulates, solvents, chemicals, radioisotopes, radioactive contaminations, silicon oils, mold release agents. Surfaces cleaned: Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, rubber and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Corrosion testing may be advisable. Cleaning method: Soak, brush, sponge, cloth, ultrasonic, flow through clean-inplace. Will foam—not for spray or machine use. Directions: Make a fresh 1% solution (2 1/2 Tbsp. per gal., 1 1/4 oz. per gal. or 10 grams per liter) in cold, warm, or hot water. If available use warm water. Use cold water for blood stains. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe, or ultrasonic method. Not for spray machines, will foam. For nonabrasive scouring, make paste. Use 2% solution to soak frozen stopcocks. To remove silver tarnish, soak in 1% solution in aluminum container. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized, or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic, and metal surfaces. Corrosion testing may be advisable. -
AMS soil augers are commonly used throughout the world for obtaining disturbed soil samples at or near the surface and for boring to depths where samples may be obtained with a soil sampler or soil core sampler.
Available in alloy steel or stainless steel, with either threaded or quick-connect options. Perfect for augering shallow depths, AMS soil augers can also auger deeper depths and are generally limited by only the time and muscle of the user. Listed below are the most common AMS augers that we stock. -
The AquaPore inline filter is the world's first biodegradable filter capsule. Having the same special patented additive as all our other landfill biodegradable products, the AquaPore filter is a disposable plastic filter which will biodegrade when discarded to a landfill. It is especially convenient when used with low-flow groundwater sampling but can also easily be used with a bailer, or with a filter flask for surface water filtering. All AquaPore filters now come with a threaded barb adapter to allow easy connection to your low-flow discharge line (3/8" OD). The AquaPore 800 biodegradable filter has a huge 800cm2 capacity to handle water with high turbidity, while the AquaPore 500 has a 500cm2 capacity for medium turbidity. Both filters have the same proprietary additive we use in our other biodegradable products to make them landfill biodegradable. It has been designed specifically for the preparation of groundwater samples for dissolved metals analysis and for filtering large volumes of turbid groundwater. The AquaPore filter has been lab tested and rinsate verified for 66 trace elements complying with ANZECC recommendations. -
Disposable Bailer Cord Our disposable bailer cord is mainly used to deploy bailers and sleeve samplers. Made from polypropylene, it is well suitable for all types of ground water sampling. The 2.5mm diameter twine is packaged in a convenient 100m spool and also made in Australia. It has a manufacturers stated break load of approximately 195kg, so can be used for a range of applications.
-
CETCO Bentonite, Gels, and Cement We now stock bags of bentonite, making it easier to get all your well installation material from the one location. 25kg Bags of bentonite are available in granules or chips. Bentonite tablets and coated slow release tablets are also available for applications where immediate reaction with water is not desired. -
The BioBailerTM is a quick and easy way to sample groundwater. Simply lower the bailer into your well and it fills with water as it submerses. When you pull up to retrieve the bailer the check-valve closes, trapping approximately 1L of water inside. BioBailersTM are made from landfill-biodegradable* PVC, and will only start to biodegrade once in a microbe rich environment such as a landfill. They do not require high oxygen or temperature to biodegrade such as in a commercial compost. Achieve the same groundwater sampling integrity as non-biodegradable bailers but more responsibly.Need to sample LNAPL / PSH? The easiest and most cost effective way is with the Hydrocarbon only or HC BioBailers. HC BioBailersTM allow you to collect floating LNAPL / PSH from a well, without collecting water. The ball valve is denser than LNAPL but lighter than water so it pushes water out of the bailer while keeping the LNAPL. These bailers also have a wider mouth than regular bailers, allowing you to collect more LNAPL with each bail. Like all BiobailersTM they are landfill-biodegradable. -
Low-Flow Sampling has been the preferred method of choice for many years now in Australia for groundwater sampling. Now you can use disposable bladders responsibly by choosing our landfill biodegradable bladders. Fieldtech Solutions has developed landfill-biodegradable concertina style bladders, and also tube style bladders for 2 of the most popular low-flow groundwater sampling pumps. These bladders have the same biodegradable additive as our other disposable sampling products so that they will biodegrade once disposed to a landfill. *Concertina style bladders now also available in HDPE* -
Biogone ziplock bags are landfill biodegradable and well suited for PID soil headspace sampling. Available in packs of 25 or cartons of 500. -
Landfill-biodegradable nitrile gloves can be recycled or disposed of in the general rubbish bin. Once disposed to landfill, biodegradation is accelerated approximately 90%+ faster conventional nitrile gloves, producing an organic matter (a natural fertiliser) and no microplastics. For further information click here. -
Landfill-Biodegradable Push-Tube Liners for Soil Sampling
The BioLinerTM has been available in Australia since 2012, and as the name suggests it is a plastic liner for soil sampling that will biodegrade* 90+% faster than conventional push-tube liners when discarded to a landfill. A special additive in the plastic encourages microbes to consume it. BioLinersTM are made from biodegradable* PVC, and will only start to biodegrade once in a microbe rich environment such as a landfill. They enable you to achieve the same sampling integrity as non-biodegradable liners but more sustainably. Soil push-tube liners, once used are normally discarded having served their purpose. However this adds to our plastic disposal problem. In Australia alone over 1.5 million tons of plastic waste is disposed of each year, approximately 30 million tons in the USA, and about 5 million tons in the UK. Unfortunately most of this goes to landfill with only a small percentage being recycled. This is unsustainable, and the problem will only get worse unless we change our consumer habits. Only the BioLinerTM can help you achieve more sustainable soil sampling. *Biodegradation has been verified by independent laboratory using ASTM D5511 for anaerobic landfill conditions.
-
Is sampling groundwater responsibly important to your business? ...then switch to 'BioTubing'. Our landfill-biodegradable tubing helps minimise plastic waste build-up in our landfills. BioTubing is made from landfill-biodegradable* LDPE (low density polyethylene) or HDPE (high density polyethylene), and will only start to biodegrade once in a microbe rich environment such as a landfill. It does not require high oxygen or temperature to biodegrade such as in a commercial compost. BioTubing enables you to achieve high sampling integrity plus operate more sustainably. Bonded Tubing for Low-Flow Sampling Our bonded tubing has the 1/4″ and 3/8″ tubes bonded together with a thin bridge and conveniently packaged on a 100m spool. The air and water lines have been bonded during the extrusion (manufacturing) process, and can be separated easily in the field to connect to a pump and controller fittings. It is recommended to scrape the bonding bridge clean with a knife to ensure a perfect seal. Many people prefer using bonded tubing as it can simplify pump deplyment and handling, and it can reduce the possibility of getting pumps stuck. The easiest way to manage your bonded tubing during pump depolyment, sampling, and storage, is by using the Rapid Reel tubing dispenser. Ultra-Clean BioTubing Our BioTubing has been independently tested for any leaching of 58 VOCs and 101 SVOCs. The VOCs were tested using USEPA 8260B process and the semi VOCs via USEPA 8270. After tumbling for 18 hours the tubing showed 'non detect' on all the compounds analysed for. These compounds included Phthalates and PAHs. Data available on request. Waste Plastic Facts- In Australia alone over 1.5 million tons of plastic waste is disposed of each year, approximately 30 million tons in the USA, and about 5 million tons in the UK
- Unfortunately most of this goes to landfill with only a small percentage being recycled
- The use of plastic in western Europe and Australia is growing by about 4% each year
- Plastic can take up to 500 years to decompose
- Nearly every piece of plastic ever made still exists today
- By using BioTubing and other landfill-biodegradable products you are helping to reduce the amount of plastic waste build-up in our landfills
Our Products
Copyright © 2024 FieldTech Solutions. All rights reserved.
