Liquinox is a concentrated, anionic detergent for manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Extremely mild and completely soluble in hard and soft water. USDA authorized. Dilute 1:100. pH 8.5
Used to clean: Healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, sampling apparatus, catheters, tubing, wine glasses, clean rooms, medical devices, optical parts, electronic components, pharmaceutical apparatus, cosmetics manufacturing equipment, metal castings, forgings and stampings, industrial parts, pipes, tanks and reactors. Authorized by USDA for use in federally inspected meat and poultry plants. Passes inhibitory residue test for water analysis. Used for phosphate sensitive analysis ware. FDA certified.
Used to remove: Soil, grit, grime, slime, grease, oils, blood, tissue, particulates, deposits, chemical and solvents.
Surfaces cleaned: Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, cement and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Used for art restoration. Corrosion testing may be advisable.
Cleaning method: Soak, brush, sponge, cloth, ultrasonic, flow through clean-inplace. Will foam—not for spray or machine use.
Directions: Make a fresh 1% solution (2 1/2 Tbsp. per gal., 1 1/4 oz. per gal. or 10 ml per liter) in cold, warm or hot water. If available, use warm water. Use cold water for blood stains. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe or ultrasonic method. Not for spray machines, will foam. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic and metal surfaces. Corrosion testing may be advisable. Formerly known as LIQUI-NOX.
Tech-notes: Is Alconox detergent the same as Liquinox detergent ?
-
Plug & Play Compatability - Smart Sensors The InsiteIG Dual Channel Analyser is a unique system that combines advanced electronics with solid-state, smart sensors. The analyser will accept any combination of two standard InsiteIG DO, SS, pH, or ORP sensors and automatically configures for the correct operation. The system allows for flexible and economical process monitoring and control. Fluorescence Dissolved Oxygen —Theory of operation A very specific energy wavelength is transmitted to a ruthenium compound immobilized in a sol-gel matrix. The ruthenium will absorb this energy, changing the outer electron’s energy level. The electron will then collapse back to its original energy state, emitting the energy as a photon with a different specific wavelength. This is called fluorescing. If the intensity of the transmitted wavelength is tightly controlled, the amount of fluorescing is both predictable and repeatable. If oxygen molecules are present the amount of fluorescing is reduced, referred to as fluorescence quenching. By measuring the amount of quenching it is possible to determine the amount of oxygen present. Download Brochure
-
The engineered plastic 12 volt submersible centrifugal Tempest/Twister® pump is capable of pumping up to 18m from ground level, and the Super Twister® up to 25m (Depth to Water) by simply connecting to a 12 volt deep cycle battery. They are well suited for continuous sampling and purging of groundwater wells, or Low Flow Sampling by adding the optional controller.
They can also be mounted on a hose reel as indicated by the images. -
Well Development or Sampling The stainless steel bailer is ideal for both groundwater sampling & well development. The all stainless steel construction and check ball allows for rapid decontamination between wells. The tapered top is designed to avoid hang ups in the well, and smooth raising & lowering. A 45mm diameter enables it to be used in standard 50mm monitoring wells. Reusable equipment such as this helps reduce the amount of disposable waste, and adds sustainability to your operation. -
The fox whistle is the ultimate low cost tool you can use for measuring depth to water. Our fox whistle is made from stainless steel, is 20mm in diameter and 200mm long. Air is pushed through the hole in the fox whistle and when it comes into contact with water, it makes a whistling sound. A 30m tape on a windup reel is also available to order as well. Please Note - Maximum depth recommended is approximately 20m, otherwise you may not hear the whistle. Also, not recommended for use in noisy environments such as a busy road or noisy site, as again you may not hear the whistle. -
The Swing Sampler enables you to reach out up to 2.4m from a river bank or shore to take a 1.2L surface water sample. It can also be used for reaching into tanks, drums, or any difficult locations with up to 90 degrees rotation on the free-swinging head. The sample jar has a volume of 1.2L and can be re-used (recommended to use Decon 90 to clean between samples). The re-useable sample jar is made from landfill-biodegradable plastic, so when it eventually gets disposed to a landfill it will biodegrade. -
For Narrow Diameter Wells The Skinny Dipper water level meter is ideal for measuring static water levels in narrow wells, boreholes, tubes and piezometers. The slim line tape and ¼” probe enable users to take readings while the pump is still in the well, whereas wider tapes may get tangled. The premium padded carry case comes included to protect your precision instrument from the elements. The ¼” polyethylene tape, available in metric (mm) or engineering scale (1/100’), is marked with black and red graduations, making measurements easy to read in the field. -
The water tape2 water level meter is made for drillers, consultants and hydrogeologists that are looking for an economic water level meter that does not lack in quality. The water tape2 provides accurate water measurements without going over budget. The Heron water tape2, an economical water level meter, can be used for measuring both static and drawDown levels in open bodies of water, wells, boreholes and standpipes. This low cost unit with DUAL FUNCTION capability is ideal for every project and budget. The water tape2 manufactured with the white polyethylene tape, reinforced with Kevlar is available in both metric and engineering scale. Unlike some other white tape units, the water tape2 comes with a fully pressure rated probe* and carry bag. -
The Heron dipper-T water level meter is designed for well drillers, consultants, and hydrogeologists all across the globe. The dipper-T is a rugged and dependable water level meter made from high quality materials, easy to use for a wide variety of applications. The dipper-T is capable of measuring both static and falling head levels. Static mode is used for measuring the depth of water in wells, boreholes and standpipes. DrawDown mode is used for measuring falling water levels during purging, well development and for low flow sampling; helping to protect your pump from damage caused by dry running. The Heron dipper-T is renowned for its premium, polyethylene coated yellow steel tape accuracy in measuring depth to water. Available in your choice of either metric or engineering scale. The highest accuracy begins with a top quality, heavy duty tape. Each tape is tested to ensure compliance with appropriate ASME standards. These tough tapes have a breaking load of over 150 kg. The tape is made from high tensile steel, ensuring resistance to stretching even at abnormal loads. Everything on the unit from the ergonomic vinyl carry handle to the easy clean, full depth stainless steel probe has been carefully designed to give you the very best water level meter. Each unit includes a sturdy padded nylon carrying bag. Drawdown Feature For Low-Flow Sampling With a touch of a button the unit changes from static to drawdown mode; a dual function unit at an affordable price. The dipper-T in drawdown mode is ideally suited for low-flow groundwater sampling. During sampling the drawdown level needs to be monitored closely so that it does not fall below the pump inlet. If the drawdown alarm sounds then the user can quickly slow the pumping rate or stop the pump temporarily and allow the well to recover. The drawdown feature may be used for measuring falling water levels during purging and well development, helping to protect electrical pumps from damage caused by dry running. The Well Casing Indicator Probe is used to measure the depth of metal casing in wells and boreholes from 50mm in diameter and upward. The Well Casing Indicator Probe works using magnetism. While the probe sits within the magnetic field of the steel casing, an auditory and visual signal is active. When the probe leaves the magnetic field the signal stops. Note the condition of the well for accurate readings. The Well Depth Indicator Probe (or bottom detector) is used to measure the full depth in wells and boreholes. The Well Depth Indicator Probe uses a pressure sensitive plunger to measure the distance to the bottom of the well. When the Well Depth Indicator Probe reaches the bottom of the well, the plunger enters the probe body closing a switch, initiating an audible and visual signal at the top of the well. -
The Shelby sampler is a thin-walled soil sampling system. The system is used to sample soils that are particularly sensitive to sampling disturbance, as it has a very low wall thickness-to-sample area ratio. The sampler consists of a thin walled steel tube whose lower end is shaped to form a cutting edge. Fieldtech Solutions is now stocking U63 and U50 Shelby Tubes and drive heads. Drive Heads are available in AW, AWJ, or NWJ box threads. -
Suitable for our 100mm PN12 PVC Screen and Casing, these flush-fitting bottom end caps are available with either male or female threads to help minimise your off-cut wastage during 100mm well installations. -
The Flexipoint is pointed bottom end cap made from recycled plastic. It is long enough to be installed on either the male or female threaded end of the 50mm slotted PVC screen, without a need to cut off the female thread.
-
Trim your casing below ground level safely and easily These new internal pipe cutters have an ingenious design to ensure a safe, easy, and clean cut without any PVC shavings falling into your monitoring well. The IPC50 and IPC100 are an ingenious design of internal pipe cutter. It uses a replaceable cutting wheel blade to give a clean cut without any shavings. As you tighten the handle and rotate, the cutting wheel pushes against the inside of the casing and cutting cleanly through. The replaceable cutting wheel pushes against the casing from the inside out, and is tightened with each rotation to give a clean and precise cut. Available in sizes to suit 50mm and 100mm casing. -
Discoverer Core Sample Trays Made in Australia, the Discoverer® core trays are rugged and lightweight. They are now available in black recycled plastic too and are also fully recyclable. Safety: The Discoverer® plastic core trays remain relatively cool to touch when left outside, unlike metal trays. Therefore no more painful burns when handling core trays. Rounded edges mean no more dangerous sharp edges, leading to improved safety when handling. Built in Handles on both ends of the trays provide safe and easy use when handling. Being manufactured with a one piece mold means no unusable trays in use, reducing the chance of workplace related injuries. Superior Strength and Durability: Made from a one piece mold, meaning no pop rivets and welds which increases the products strength and importantly no sharp edges. The Discoverer® is made using the highest UV stabilized polypropylene available making it exceptionally durable in any harsh mining or exploration environment. Manufactured from exceptional quality raw materials, which makes it extremely resistant to impact and crushing. The Discoverer® Sub Zero is manufactured for use in freezing conditions and trays are tested to minus 50°C. Ease of use: A bold start indicator has been designed to make it absolutely clear to the driller at which end they should commence loading the core from, eliminating possible errors in the logging process. The trays are colour coded, allowing for quick and easy identification of the different sizes both in storage and out in the field and when re-ordering. The Discoverer® has a built in ID Tag area and optional aluminum tag inserts providing a permanent record of contents. The Discoverer® has standardized sizing. The majority of sizes used in the environmental, mining and exploration industries are H, N, P & B core diameters. Lengths are standardised making all the trays 1m (3.49ft) long. Maintain Your Core Integrity: The materials used during manufacturing have a high level of resistance to organic chemicals that are found in some drill core recovery, meaning your core won’t become contaminated. The Discoverer® is non-magnetic and will not corrode keeping your core free from magnetic susceptibility when testing and ensures no corrosion of the trays occur. The unique raised ribbed design helps to retain the quality of your core by improving drainage. The Discoverer® core trays cannot be affected by insect infestations like wooden core boxes as the plastic is not penetrable. The plastic used in the core boxes will not migrate or leach into your core samples. The Discoverer® core trays have a range of accessories available and one of these is the custom made lid which assists to maintain your core’s integrity at all times. Only the Discoverer® core trays have unique a stacking capability, which allows the trays to stack perfectly on top of each other, loaded with core without touching the tray below. This means that your core is stored without interference, helping to retain the quality of the core. -
Drilling standards for environmental applications often require that wells are drilled without the introduction of fluids. To achieve this goal hollow augers can be utilised in unstable formations where solid stem augers are not effective. 3 sizes of timber plugs are now available for your hollow stem auger installations. Made from recycled timber for sustainability.- 57mm (2.25")
- 108mm (4.25")
- 159mm (6.25")
-
The Heron H.OIL & SM.Oil interface meters are used to measure the thickness of floating or sinking hydrocarbon products (LNAPL, PSH, DNAPL), in groundwater accurately, reliably, safely & economically. The SM.Oil is essentially a smaller, lighter and mini-version of the industry standard H.Oil. Unlike other interface meters, the H.Oil and SM.Oil come with fully submersible probes. Easy to Operate with Accuracy The easy to read accurate (ASME standard) heavy duty Kynar® jacketed tape allows you to measure with confidence to 1mm resolution. Ruggedness and Dependability For dependable field use, it features an environmentally protected encapsulated circuit for safety and durability on an easily removable modular electronic panel. The field changeable probe makes your job more efficient. Save Money on Repairs & Replacements The unique flexible link between tape and probe protects the tape. Should the probe become “hung up” in the well, the link will break, saving the tape by sacrificing the less expensive replaceable probe. In addition, the core of the measuring tape used is high tensile steel with a breaking load over 300Lbs (136kg)- to further protect the instrument. The modular constructed quick change probe and electronic panel make replacing parts fast and convenient. Safety over a Wide Range of Gases The industry leading H.Oil interface meter offers you the highest protection against fire and explosion. -
Conductivity, Temperature & Static Levels The Conductivity Plus enables accurate measurements of conductivity, water levels and temperatures in wells, boreholes, stand pipes and estuaries where salt water intrusion and contamination levels become a concern. Conductivity can be an early indicator of change in a water system due to fluctuations of salinity in water levels. The premium padded carry case comes included to protect your precision instrument from the elements. The high tensile steel core measuring tape is tested for stretch resistance to ASME standards and is ideal for profiling up to 50˚C. An LCD screen displays conductivity values up to 80,000 µS and temperature range from 0˚C – 50˚C. The conductance temperature compensation coefficient is 2.0%. Calibration of the conductivity plus is easy using readily available 1413, 5000, 12880, 111800 uS solutions, and up to 4 calibration points can be utilised. The Conductivity Plus provides a higher range of up to 250,000 μS/cm, which is the highest conductivity range on the market. -
Biogone ziplock bags are landfill biodegradable and well suited for PID soil headspace sampling. Available in packs of 25 or cartons of 500. -
Biodegradable Sleeving for Sonic Rigs Now you can reduce your plastic footprint on sonic rig sampling jobs by using landfill-biodegradable HDPE sleeving. The clear sleeving has a 203mm lay-flat width, and a thickness of 150 micron. Suitable for Geoprobe, Boart Longyear, and any other sonic rigs which use 8" lay-flay sleeving. -
VOC Sampling in Water or Soil Gas Sampling FEP or PTFE tubing is commonly referred to as 'Teflon® Tubing'. Teflon® is a registered trademark of DuPont, and they were the first company to discover these types of plastics in the 1940s. Fieldtech Solutions stocks clear FEP tubing for soil gas sampling in 1/4" OD size in 15m and 60m rolls. We can also supply a range of PTFE in larger diameter sizes. -
Mi605 is a portable, microprocessor-based, Dissolved Oxygen meter with automatic calibration and temperature compensation (ATC) specifically designed for spot sampling applications. Dissolved Oxygen measurements can be displayed in parts per million (ppm=mg/L) or in % of saturation. The temperature is indicated in Celsius from 0 to 50°C with 0.1 resolution. The meter compensates salinity and altitude automatically after manual input. Calibration is very simple and fast: just expose the polarographic Dissolved Oxygen probe MA840, supplied with the instrument, to air and press the CAL button. No need for chemical solutions! A HOLD button allows the user to freeze the reading on the LCD. The low battery indicator and the easy to replace screw on cap membranes make the Mi605 a compact instrument and ideal for all applications: aquaculture, wastewater, environmental and educational. -
The Milwaukee Low FLow Kit is a convenient and reliable multi-parameter water quality monitoring system, designed specifically for low-flow groundwater sampling at a budget price. The Milwaukee Low Flow Kit contains everything you need for accurately monitoring water quality parameters during low-flow groundwater sampling, in a convenient and rugged carry case. -
The premium, highly accurate dipperLog TOUGH+ with titanium body and transducer is suitable for use by environmental technicians and other groundwater professionals in the most caustic and hazardous of environments. The dipperLog TOUGH+ is a reliable, cost-effective solution for long and short-term monitoring of groundwater levels and temperature in wells where contamination is a concern. Suspended Version: Install the logger using a suspension cord and simply pull the logger up, connect to a laptop or tablet with a P.C. Communication Cable and retrieve your data. Real time readings are not available with this option. Direct Read Version: This is the least labour-intensive model for groundwater data logging. The data logger is suspended on a direct read cable, which establishes a connection to the data logger at the wellhead. Programming, downloading, stopping and starting data collection can be done while the logger is deployed. Just connect your laptop or Windows Tablet at the wellhead. Reel Version: An ideal option when transporting your data logger from site to site for pump and slug tests or any other short-term deployment. Programming and downloading of the data is capable via the connection on the face plate on the reel. Real time readings are available with this option. barLog: A barometric logger, that is used to automatically compensate readings stored on the dipperLog for changes in barometric pressure (for absolute version). Recommended for long term monitoring or where more than one logger is deployed within a 5 km radius. Download Brochure -
Measure the pH in soil easily using the Milwaukee Instruments MW101-SOIL pH meter kit. This portable meter is also suitable for use in a wide range of applications such as education, agriculture and horticulture, as well as water and environmental analysis.MW101 performs pH measurements with a 0.01 pH resolution and with manual temperature compensation.The meter is supplied with pH electrode and calibration solutions.
-
Mi306 Conductivity / TDS / NaCl / Temperature Professional Portable Meter
Mi306 is a waterproof portable logging microprocessorbased Conductivity / TDS / NaCl / Temperature meter. The autoranging feature of the EC and TDS ranges automatically sets the meter to the scale with the highest possible resolution. The Auto Endpoint (HOLD) feature automatically freezes the display when a stable reading is reached.
The measurements are automatically (ATC) or manually (MTC) compensated for temperature. The temperature coefficient value is user selectable. It is possible to disable the temperature compensation and measure the actual conductivity (NoTC). The Battery Error Preventing System (BEPS) switches the meter off when the batteries are too weak to support proper function. The meter can store measurements in memory by logging function for retrieval at a later time upon user request.
Mi306 also allows data transfer to computer through the RS232 port. Double LCD displays, for simultaneous readings of the specific conductivity and temperature.
-
Measures 4 parameters with 1 single probe, offering a combination of pH, Conductivity, total Dissolved solids and temperature measurements. You can select from a range of calibration buffers and also the temperature scale (°C or °F) can be selected. The multi-parameter probe MA851D/1, includes pH/EC/TDS and temperature, all in one rugged handle. Other features include different TDS factors from 0.45 to 1.00, and a range of temperature coefficients (ss) from 0.0 to 2.4% for greater consistency and reproducibility. The Stability Indicator prompts the user when the reading stabilizes. The Auto-Hold Function automatically freezes reading for later viewing. Large and Easy-to-Read display provides simultaneous readings of pH and Temperature or EC/TDS and temperature. -
Measures 4 parameters with 1 single probe. Mi805 offers you a combination of pH, Conductivity, total Dissolved solids and temperature measurements. You can select from a range of calibration buffers and also the temperature scale (°C or °F) can be selected. The multi-parameter probe MA851D/1, includes pH/EC/TDS and temperature, all in one rugged handle. Other features include different TDS factors from 0.45 to 1.00, and a range of temperature coefficients (ss) from 0.0 to 2.4% for greater consistency and reproducibility. The Stability Indicator prompts the user when the reading stabilizes. The Auto-Hold Function automatically freezes reading for later viewing. Large and Easy-to-Read display provides simultaneous readings of pH and Temperature or EC/TDS and temperature.
-
Used during soil vapour monitoring, 3-way and 2-way valves are an ideal addition as part of leak testing and purging.- 3 way valves with 2 Female luer ports and 1 male luer lock
- 2 way valves with 1 Female luer ports and 1 male luer Lock
-
The Heron Instruments barLog, barometric logger is used to automatically compensate readings stored on the dipperLog for changes in barometric pressure. The barLog, with readings every 1 hour and a memory capacity of 32,000 data points, is recommended for long term monitoring or where more than one logger is deployed withing in a 5 km radius. The dedicated, intuitive software makes the dipperLog quick and easy to program and launch. Simply recover your data, save your findings in a tabular display and graph, view both parameters side by side in a split screen. Use the Heron Instruments’ barLog alongside your dipperLog Groundwater Data Logger for the most accurate data possible. Add a barLog to your quote for the dipperLog TOUGH, dipperLog 64, or dipperLog 32. Download Brochure -
The dipperLog 128+ is a highly accurate groundwater data logger used by hydrogeologists, hydrologists, environmental technicians, water well contractors and other groundwater professionals. The dipperLog 128+ is a reliable and cost-effective solution to long and short-term monitoring of groundwater levels and temperature in wells, boreholes and open bodies of water. All Heron loggers are available in various deployment options: 1) Suspended Version – pull the dipperLog out of the well to download 2) Direct Read Version – enables you to do real time readings and download your data while the dipperLog is still in the well. 3) Reel Version – a portable solution, ideal for short term slug and pump testing Download Brochure
