- 57mm (2.25")
- 108mm (4.25")
- 159mm (6.25")
-
Drilling standards for environmental applications often require that wells are drilled without the introduction of fluids. To achieve this goal hollow augers can be utilised in unstable formations where solid stem augers are not effective. 3 sizes of timber plugs are now available for your hollow stem auger installations. Made from recycled timber for sustainability. -
Vertical Downhole Inspection Camera The dipper-See EXAMINER vertical downhole inspection camera is a cost-effective way for people performing well inspections, maintenance, and installation to do their jobs quickly and accurately. The dipper-See EXAMINER comes with everything a well inspector, well driller, or hydrogeologist needs to do more work in less time. The Heron dipper-See EXAMINER is a robust and cost effective vertical downhole inspection camera. Designed with portability in mind, this self-contained unit is ideal for viewing in wells, drains, vertical shafts, open bodies of water, boreholes and narrow tubes over 25mm (1”) in diameter.* The dipper-See EXAMINER and the included accessories are easily transported in the provided super tough wheeled carry case and accessory case, ideal for protecting your investment from the elements. The adjustable positioning arm, conveniently attached to the frame, offers an ergonomic solution for adjusting the monitor for viewing the High Definition (HD) display screen at different angles and varied lighting conditions. The monitor conveniently houses all of the controls on the front of the panel. Record the video/audio on the SD card provided with the DVR, for easy transfer of video to another device. Please note that the monitor is rated IP65 and should be covered during wet or inclement weather and protected against direct exposure to water projection (spraying). The HD, detachable See-120 camera probe is designed to work in the harshest environments and stand up to the most rigorous use. The camera probe can be easily removed at the link connection for field replacement and for future camera upgrades. The built-in hanger on the frame can support the unit at the top of the well, allowing for hands-free viewing while in the field. Available in 150m or 500ft tape lengths only* Download Brochure
-
A Large Well Cover with Non-Metallic Lid The Nondo Maxi SMC well cover has a non-metallic lid, making it ideal for wells with instrumentation inside requiring data transmission through the lid, such as a telemetry system. It has an SMC (sheet moulding compound) lid, smc base ring, and a sheet metal skirt. The traditional looking 2-bolt design has a completely sealed lid with a unique one piece gasket to prevent any surface water ingress, and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D. The 337mm diameter cover has an anti-slip dimpled surface on the lid, 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be levered off with a screwdriver. Optional add on: Nondo Safety Lifter Use the Nondo Safety Lifter tool to safely remove and reinstall the heavy lid and to avoid crushed fingers.
-
A Solution for Legacy Covers The universal FB180 lid is designed to fit legacy well covers from other manufacturers which are no longer in production. This includes the 'EE' FB180, and other similar covers. Sometimes lids can go missing or get broken on site over the years. Rather than breaking up the concrete to install a new cover, often involving costly traffic management, you can now simply replace the lid. Suitable bolts and an oring is also supplied with the lid. Please note it is not a replacement lid for our Nondo covers. -
Prepacked Screen for Environmental Monitoring Wells- Great solution for sites prone to collapsing sands
- Ensures accurate placement of filter media across desired interval
- No adapters required, will thread directly onto our casing
- Available in 50mm (PN18), 1.5m lengths
- Male / Female threaded
- Bottom end caps available, including the universal 'FlexiPoint 50'
-
The TriCap-GAS has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. The TriCapGas can also be locked in place with a padlock or by using a security screw or both for extra security. The TriCap has a partially hollow shaft that intersects a horizontal side hole near the bottom. This allows the well gas to be drawn in through the side hole and out the top. The side hole also serves to hang sampling or monitoring devices off the bottom of the cap while at the same time gas samples can be taken out through the shaft and out the gas quick connect fitting. -
An environmental monitoring well cap or plug made from post-consumer recycled plastic for sustainability. The TriCap provides:- Strong protection for your monitoring wells
- Self locking option with additional stainless steel security bolt, using a special key tool or allen key
- Hanger cable holes on bottom end of shaft
- Fully sustainable, made from recycled plastic waste
- Wide rubber ring provides a water tight seal
- Also available in orange
-
The TriCap-LOG has been specifically designed for use with submersible groundwater level logging devices. Just like the TriCap-GAS, the hollow shaft intersects a horizontal side hole through the shaft near the bottom. An elbow fitting installed in the top enables the well to be vented to the atmosphere. Attach optional tubing to allow the vent port to be raised up above any surface water and prevent it from flowing into the well through the vent. A stainless spring clip is also provided for easy logger attachment. The Tricap-Log is the perfect choice for use with submersible groundwater logging devices. It features an elbow fitting which vents the well to atmosphere, and a unique stainless spring clip for easy logger attachment. The TriCap is made from recycled plastic for sustainability and enables a groundwater monitoring well to be sealed and locked. -
Made from post-consumer recycled plastic (i.e. bottles and other plastic waste sent for recycling), these stylish upright covers give your monitoring well a professional finish. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Economy Standpipe Cover is a thinner walled option for budget limited projects. They have a recycled plastic inner core and a bright yellow outer layer for high visibility.
-
The 100mm well plug is manufactured from a recycled composite glass filled polymer that will not corrode, and is stronger than steel, pound for pound. The center locking mechanism allows a padlock to be secured in a variety of positions, offering more flexibility in applications with limited space. Constructed of recycled composite glass-filled polymer which is stronger than steel pound for pound, the 100mm well plug is designed for years of worry-free use. The wing nut design with a recessed grip allows a padlock (not included) to be easily installed. The 100mm well plug has a tethering attachment at the base for use with a variety of instruments, features no metal parts, and can be disassembled for easy decontamination. The standard well plug and GasCap is available for 100mm wells. -
Corrosion Protection for Standpipe Covers: Certain site requirements or tender specifications require galvonised steel. The standpipe also has a unique non-binding swivel hinge for long life, which is protected from rain. Traditional looking standpipe covers have hinges which are exposed to the elements and therefore prone to corrosion and eventually seizing up or dropping off. Our unique design has addressed this weakness. The 100mm square galvanised steel standpipe covers have a unique non-binding 'hidden hinge' design which provides a rain proof cover. These low-cost covers have a galvanised / silver finish for corrosion protection. -
Our largest standpipe cover is the all recycled plastic SP272. This round standpipe cover has a 250mm internal diameter which means there's even enough room for 150mm PVC well installations. The mottled, multi-coloured look is a result of the post-consumer plastic items being melted together to make a unique and great looking cover. Ideal for landfill or remediation applications where a larger diameter cover is often desired. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. -
The WC100GAS has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. The WC100Gas can also be locked in place with a padlock or by using a security screw or both for extra security. It has a large wing nut, designed to make it easier to tighten or release the plug. It comes with a ring below so you can hang/attach tubing, skimmers or sleeve samplers in the well. -
The WC25Gas has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. -
The Flexipoint is pointed bottom end cap made from recycled plastic. It is long enough to be installed on either the male or female threaded end of the 50mm slotted PVC screen, without a need to cut off the female thread.
We ship all our products with recycable and biodegradable materials.
We ship all our products with recyclable and landfill-biodegradable materials.
We use newspaper as filler and recycled cardboard boxes where possible to replace non-recyclable material.
