- Vented cable provides real time barometric compensation
- Simple two-wire connection
- Output signal is compatible with most telemetry, SCADA and PLC systems
- High noise immunity on long cable runs
- Wide range of supply voltage (7.5VDC-35VDC)
- High accurate water level measurements
- Reverse polarity protected
-
The Heron 4-20mA Pressure Transmitter is easily integrated into an existing SCADA system, digital display and 3rd party data logger. It will provide a continuous, accurate water level reading for a wide variety of applications. A two-wire 4-20mA Pressure Transmitter current configuration is used with the Heron Pressure Transmitter which is the most widely used signal transmission for transducers in industrial environments. -
For Narrow Diameter Wells The Skinny Dipper water level meter is ideal for measuring static water levels in narrow wells, boreholes, tubes and piezometers. The slim line tape and ¼” probe enable users to take readings while the pump is still in the well, whereas wider tapes may get tangled. The premium padded carry case comes included to protect your precision instrument from the elements. The ¼” polyethylene tape, available in metric (mm) or engineering scale (1/100’), is marked with black and red graduations, making measurements easy to read in the field. -
Plug & Play Compatability - Smart Sensors The InsiteIG Single Channel Analyser is a unique system that combines advanced electronics with solid-state, smart sensors. The analyser will accept any standard InsiteIG DO, SS, pH, or ORP sensor and automatically configures for the correct operation. The system allows for flexible and economical process monitoring and control. Fluorescence Dissolved Oxygen —Theory of operation A very specific energy wavelength is transmitted to a ruthenium compound immobilized in a sol-gel matrix. The ruthenium will absorb this energy, changing the outer electron’s energy level. The electron will then collapse back to its original energy state, emitting the energy as a photon with a different specific wavelength. This is called fluorescing. If the intensity of the transmitted wavelength is tightly controlled, the amount of fluorescing is both predictable and repeatable. If oxygen molecules are present the amount of fluorescing is reduced, referred to as fluorescence quenching. By measuring the amount of quenching it is possible to determine the amount of oxygen present. Download Brochure
-
Plug & Play Compatability - Smart Sensors The InsiteIG Dual Channel Analyser is a unique system that combines advanced electronics with solid-state, smart sensors. The analyser will accept any combination of two standard InsiteIG DO, SS, pH, or ORP sensors and automatically configures for the correct operation. The system allows for flexible and economical process monitoring and control. Fluorescence Dissolved Oxygen —Theory of operation A very specific energy wavelength is transmitted to a ruthenium compound immobilized in a sol-gel matrix. The ruthenium will absorb this energy, changing the outer electron’s energy level. The electron will then collapse back to its original energy state, emitting the energy as a photon with a different specific wavelength. This is called fluorescing. If the intensity of the transmitted wavelength is tightly controlled, the amount of fluorescing is both predictable and repeatable. If oxygen molecules are present the amount of fluorescing is reduced, referred to as fluorescence quenching. By measuring the amount of quenching it is possible to determine the amount of oxygen present. Download Brochure -
Biodegradable Sleeving for Sonic Rigs Now you can reduce your plastic footprint on sonic rig sampling jobs by using landfill-biodegradable HDPE sleeving. The clear sleeving has a 203mm lay-flat width, and a thickness of 150 micron. Suitable for Geoprobe, Boart Longyear, and any other sonic rigs which use 8" lay-flay sleeving. -
Drilling standards for environmental applications often require that wells are drilled without the introduction of fluids. To achieve this goal hollow augers can be utilised in unstable formations where solid stem augers are not effective. 3 sizes of timber plugs are now available for your hollow stem auger installations. Made from recycled timber for sustainability.- 57mm (2.25")
- 108mm (4.25")
- 159mm (6.25")
-
Vertical Downhole Inspection Camera The dipper-See EXAMINER vertical downhole inspection camera is a cost-effective way for people performing well inspections, maintenance, and installation to do their jobs quickly and accurately. The dipper-See EXAMINER comes with everything a well inspector, well driller, or hydrogeologist needs to do more work in less time. The Heron dipper-See EXAMINER is a robust and cost effective vertical downhole inspection camera. Designed with portability in mind, this self-contained unit is ideal for viewing in wells, drains, vertical shafts, open bodies of water, boreholes and narrow tubes over 25mm (1”) in diameter.* The dipper-See EXAMINER and the included accessories are easily transported in the provided super tough wheeled carry case and accessory case, ideal for protecting your investment from the elements. The adjustable positioning arm, conveniently attached to the frame, offers an ergonomic solution for adjusting the monitor for viewing the High Definition (HD) display screen at different angles and varied lighting conditions. The monitor conveniently houses all of the controls on the front of the panel. Record the video/audio on the SD card provided with the DVR, for easy transfer of video to another device. Please note that the monitor is rated IP65 and should be covered during wet or inclement weather and protected against direct exposure to water projection (spraying). The HD, detachable See-120 camera probe is designed to work in the harshest environments and stand up to the most rigorous use. The camera probe can be easily removed at the link connection for field replacement and for future camera upgrades. The built-in hanger on the frame can support the unit at the top of the well, allowing for hands-free viewing while in the field. Available in 150m or 500ft tape lengths only* Download Brochure -
The premium, highly accurate dipperLog TOUGH+ with titanium body and transducer is suitable for use by environmental technicians and other groundwater professionals in the most caustic and hazardous of environments. The dipperLog TOUGH+ is a reliable, cost-effective solution for long and short-term monitoring of groundwater levels and temperature in wells where contamination is a concern. Suspended Version: Install the logger using a suspension cord and simply pull the logger up, connect to a laptop or tablet with a P.C. Communication Cable and retrieve your data. Real time readings are not available with this option. Direct Read Version: This is the least labour-intensive model for groundwater data logging. The data logger is suspended on a direct read cable, which establishes a connection to the data logger at the wellhead. Programming, downloading, stopping and starting data collection can be done while the logger is deployed. Just connect your laptop or Windows Tablet at the wellhead. Reel Version: An ideal option when transporting your data logger from site to site for pump and slug tests or any other short-term deployment. Programming and downloading of the data is capable via the connection on the face plate on the reel. Real time readings are available with this option. barLog: A barometric logger, that is used to automatically compensate readings stored on the dipperLog for changes in barometric pressure (for absolute version). Recommended for long term monitoring or where more than one logger is deployed within a 5 km radius. Download Brochure -
The dipperLog 128+ is a highly accurate groundwater data logger used by hydrogeologists, hydrologists, environmental technicians, water well contractors and other groundwater professionals. The dipperLog 128+ is a reliable and cost-effective solution to long and short-term monitoring of groundwater levels and temperature in wells, boreholes and open bodies of water. All Heron loggers are available in various deployment options: 1) Suspended Version – pull the dipperLog out of the well to download 2) Direct Read Version – enables you to do real time readings and download your data while the dipperLog is still in the well. 3) Reel Version – a portable solution, ideal for short term slug and pump testing Download Brochure -
The Heron Instruments barLog, barometric logger is used to automatically compensate readings stored on the dipperLog for changes in barometric pressure. The barLog, with readings every 1 hour and a memory capacity of 32,000 data points, is recommended for long term monitoring or where more than one logger is deployed withing in a 5 km radius. The dedicated, intuitive software makes the dipperLog quick and easy to program and launch. Simply recover your data, save your findings in a tabular display and graph, view both parameters side by side in a split screen. Use the Heron Instruments’ barLog alongside your dipperLog Groundwater Data Logger for the most accurate data possible. Add a barLog to your quote for the dipperLog TOUGH, dipperLog 64, or dipperLog 32. Download Brochure -
The Waterra PowerPack PP1 provides the mechanical actuation for pumping with inertial pumps to depths of over 60m, in a fully portable, single operator power unit. At 13 kg, the PowerPack PP1 provides outstanding pumping performance. The PP1 is powerful enough to lift water from over 60m depth using the Standard Flow System, and is so compact that it fits onto a back-pack frame. The PowerPack PP1 incorporates clamps for Waterra High Flow and Standard tubing sizes (adaptors are available for smaller tubes). A Honda GX-25 series, 1.0 horsepower, 4 stroke, gasoline motor powers this device, which can run for approximately 1 hour without refuelling. -
The Milwaukee Low FLow Kit is a convenient and reliable multi-parameter water quality monitoring system, designed specifically for low-flow groundwater sampling at a budget price. The Milwaukee Low Flow Kit contains everything you need for accurately monitoring water quality parameters during low-flow groundwater sampling, in a convenient and rugged carry case. -
Mi605 is a portable, microprocessor-based, Dissolved Oxygen meter with automatic calibration and temperature compensation (ATC) specifically designed for spot sampling applications. Dissolved Oxygen measurements can be displayed in parts per million (ppm=mg/L) or in % of saturation. The temperature is indicated in Celsius from 0 to 50°C with 0.1 resolution. The meter compensates salinity and altitude automatically after manual input. Calibration is very simple and fast: just expose the polarographic Dissolved Oxygen probe MA840, supplied with the instrument, to air and press the CAL button. No need for chemical solutions! A HOLD button allows the user to freeze the reading on the LCD. The low battery indicator and the easy to replace screw on cap membranes make the Mi605 a compact instrument and ideal for all applications: aquaculture, wastewater, environmental and educational. -
Liquinox is a concentrated, anionic detergent for manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Extremely mild and completely soluble in hard and soft water. USDA authorized. Dilute 1:100. pH 8.5Used to clean: Healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, sampling apparatus, catheters, tubing, wine glasses, clean rooms, medical devices, optical parts, electronic components, pharmaceutical apparatus, cosmetics manufacturing equipment, metal castings, forgings and stampings, industrial parts, pipes, tanks and reactors. Authorized by USDA for use in federally inspected meat and poultry plants. Passes inhibitory residue test for water analysis. Used for phosphate sensitive analysis ware. FDA certified. Used to remove: Soil, grit, grime, slime, grease, oils, blood, tissue, particulates, deposits, chemical and solvents. Surfaces cleaned: Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, cement and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Used for art restoration. Corrosion testing may be advisable. Cleaning method: Soak, brush, sponge, cloth, ultrasonic, flow through clean-inplace. Will foam—not for spray or machine use. Directions: Make a fresh 1% solution (2 1/2 Tbsp. per gal., 1 1/4 oz. per gal. or 10 ml per liter) in cold, warm or hot water. If available, use warm water. Use cold water for blood stains. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe or ultrasonic method. Not for spray machines, will foam. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic and metal surfaces. Corrosion testing may be advisable. Formerly known as LIQUI-NOX. Tech-notes: Is Alconox detergent the same as Liquinox detergent ? -
Alconox is a concentrated, anionic detergent for manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Ideal for cleaning contaminants from glassware, metals, plastics, ceramic, porcelain, rubber and fiberglass. Excellent replacement for corrosive acids and hazardous solvents. FSANZ Authorized. USDA authorized. Dilute 1:100. pH 9.5
Used to clean: Groundwater and Soil Sampling equipment,, Healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, sampling apparatus, catheters, tubing, pipes, radioactive contaminated articles, optical parts, electronic components, pharmaceutical apparatus, cosmetics manufacturing equipment, metal castings, forgings and stampings, industrial parts, tanks and reactors. Authorized by FSANZ and USDA for inspected meat and poultry plants. Passes inhibitory residue test for water analysis. Used to remove: Soil, grit, grime, buffing compound, slime, grease, oils, blood, tissue, salts, deposits, particulates, solvents, chemicals, radioisotopes, radioactive contaminations, silicon oils, mold release agents. Surfaces cleaned: Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, rubber and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Corrosion testing may be advisable. Cleaning method: Soak, brush, sponge, cloth, ultrasonic, flow through clean-inplace. Will foam—not for spray or machine use. Directions: Make a fresh 1% solution (2 1/2 Tbsp. per gal., 1 1/4 oz. per gal. or 10 grams per liter) in cold, warm, or hot water. If available use warm water. Use cold water for blood stains. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe, or ultrasonic method. Not for spray machines, will foam. For nonabrasive scouring, make paste. Use 2% solution to soak frozen stopcocks. To remove silver tarnish, soak in 1% solution in aluminum container. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized, or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic, and metal surfaces. Corrosion testing may be advisable.
