-
The Waterra 1 UP Peristaltic Sampling Pump can be powered by 110 and 220V AC, external 12VDC or its 12V internal battery. Suction lifts up to 8.5m. 4 Battery Choices LIFE Batteries are Lithium Iron Phosphate batteries that weigh about one half the weight of the SLA (Sealed Lead Acid) batteries. LIFE batteries a have better discharge curve, maintaining higher voltages for longer. Available in 20 Ahr and 12 Ahr formats. A LIFE 12 Ahr 1 UP Pump weighs less than 8.1kg and the 20 AHr unit weighs less than 9.5kg. SLA Batteries are Sealed Lead Acid conventional batteries that are a less expensive than LIFE batteries, but weigh about twice as much. Available in 20 Ahr and 12 Ahr formats. -
King Stuff is an all-weather product hydrocarbon free grease designed for monitoring well installs, and other environmentally sensitive drilling applications requiring a petroleum hydrocarbon-free product. King Stuff has a temperature range of -40°C to 260°C with a flash point of 226.7°C.- Hydrocarbon free
- Green colour
- Synthetic type oil
- Water resistant
- Drilling mud resistant
- Biodegradable
- Corrosion inhibited
- Vegetable-based fluids
- Nontoxic, Conforms to assembly bill 1953
-
Silicone Peristaltic Tubing is flexible and soft, making it suitable for peristaltic pumps. FieldTech Solutions Peristaltic Silicone Pump tubing is available in 15 m individually wrapped coils, available in these sizes:- 1/8" ID / 1/4" OD, 15m roll
- 4.8mm ID x 9.5mm OD, 15m roll, for use with Geotech Peristaltic Pump
- 1/4" ID / 3/8" OD, 15.2m roll
- 5/16" ID / 1/2" OD (7.9mm ID x 12.7mm OD) 15m roll
-
The QED Soil Hydrocarbon Analyser is a total organic hydrocarbon in soil and groundwater analyser that can accurately analyse both soil samples and water samples on site. Suitable for direct on-site detection and analysis, it can be synchronized with the on-site investigation and sampling team or in the field. During excavation or in the early stage of pollution, quickly determine the source of gasoline (GRO) or diesel (DRO) or other oil pollution. The QED Hydrocarbon Analyser can reliably identify petroleum hydrocarbon in the sample, as it uses the same solid state micro-spectrometers used by NASA to provide unrivalled accuracy in identifying petroleum hydrocarbons and PAHs. The QED Soil Hydrocarbon Analyser can also solve the error of interfering substances caused by natural plant corruption in current laboratory analysis methods. The QED Soil Hydrocarbon Analyzer can reduce the laboratory analysis costs and provide a faster and more convenient quick screening qualitative and quantitative method on site. Watch video demonstation: Â -
Landfill-biodegradable nitrile disposable gloves that provide comfort, dexterity and protection from chemicals. Once these landfill-biodegradable nitrile gloves are disposed of to landfill, biodegradation is accelerated approximately 90%+ faster than conventional nitrile gloves, producing an organic matter (a natural fertiliser) and no microplastics. *Biodegradation has been verified by independent laboratory using ASTM D5511 for anaerobic landfill conditions. -
The Hydrolift is a portable, 240v operated electric device that is used to automate the operation of the Waterra Pump System. This actuator is perfect for purging and sampling 50mm diameter monitoring wells up to 60m deep. In special circumstances it can lift up to 90m. This electrical Tubing Actuator is optimized to operate with the Standard Flow System up to its maximum effective depth and will operate with the High Flow System up to a depth of 45m. This Tubing Actuator is the ideal choice for the frequent user of the Waterra Pumping System with moderate to extreme pumping requirements (Low, Standard and High Flow). Using the Hydrolift will result in a big boost to your field sampling program. The Hydrolift is powered by a 3/4 horsepower (560 watts) electric motor and generates a 4 inch (10 cm) stroke at up to 140 cycles per minute. The Hydrolift weighs about 16 kg and requires an electrical power supply of at least 1000 watts. *Please note the Hydrolift requires a generator to power it. See image 2 for an animation on how the system works. -
A lower cost Class B option
The Nondo Maxi 320 - Class B monitoring well cover is a large flush-mounted well cover with a cast iron lid and base, and is ideal for 100mm or larger monitoring well installations. The Nondo Maxi 320 - Class B has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class B. Please note that it is not suitable for road traffic. The 337mm (OD) diameter cover is secure with 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be also levered up with a screwdriver. Due to its weight, we have designed a lifter which allows the lid to be removed safely from the base (see video below). -
A lower cost Class B option **Please note this well cover is a Class B well cover that is not suitable for road traffic.** The Nondo Maxi SMC B well cover has a non-metallic lid, making it ideal for wells with instrumentation inside requiring data transmission through the lid, such as a telemetry system. It has an SMC (sheet moulding compound) lid, a cast iron base ring, and a plastic skirt. The traditional looking 2-bolt design has a completely sealed lid with a unique one piece gasket to prevent any surface water ingress, and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class B. The 337mm diameter cover has an anti-slip dimpled surface on the lid, 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be levered off with a screwdriver. -
These general multipurpose gloves are suitable for multiple applications and trades including gardening, parts handling and tool operations. Reduced thickness ensures optimum tactility when working on delicate projects, provides comfort and flexibility during extended wear. These reusable landfill biodegradable multipurpose gloves can be disposed of in the general rubbish bin, and once disposed to landfill, biodegradation is accelerated approximately 90% than conventional multipurpose gloves, producing an organic matter (a natural fertiliser) and no microplastics. For further information click here. -
Landfill-biodegradable nitrile gloves can be recycled or disposed of in the general rubbish bin. Once disposed to landfill, biodegradation is accelerated approximately 90%+ faster conventional nitrile gloves, producing an organic matter (a natural fertiliser) and no microplastics. For further information click here. -
The Nondo Safety Lifter / Multi Tool enables a safe way to remove our steel well cover lids and comes with all the necessary allen keys for our well covers and TriCap well plug.
-
Our 1 litre slug is made for performing a 'slug test', which enables hydraulic conductivity estimation in monitoring wells. Designed to fit within a 50mm well and displace 1L of water. Custom sizes can also be made for larger wells, or multiple slugs can be used together to displace more water in the monitoring wells. -
A Large Well Cover with Cast Iron Lid The Nondo Maxi 320 monitoring well cover is a large flush-mounted well cover with a cast iron lid and base, and is ideal for 100mm or larger monitoring well installations. The 337mm (OD) diameter cover is secure with 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be also levered up with a screwdriver. Due to its weight, we have designed a lifter which allows the lid to be removed safely from the base (see video below).
-
Biodegradable Cleaning Concentrate Quantumclean is a highly effective decontamination and cleaning liquid which is also biodegradable. It can be used to clean pumps, bailers, tubing, soil augers, or any sampling equipment where cross-contamination between sampling locations is a concern. Quantum clean can also be used to clean radioactive contamination. Quantumclean is a concentrated mixture of surfactants, chelating agents, stabilising agents and alkali salts in aqueous solution. The mixture is non-flammable, completely water miscibleand biodegradable. Quantum clean does not containphosphates or poly-fluoroalkyl substances. -
The portable tubing reel is a great solution for tubing management when groundwater sampling. Made from high quality steel and powder coated blue for a professional finish. It folds down flat to easily fit in the boot of a car, and can be assembled in less than a minute. It will hold either 1 or 2 reels of BioTubing with ease.
-
Filter sock can be used to protect groundwater wells from infiltration of fine silt and sediment. Made from polyester and with a 340 micron pore size. Available to suit 50mm, or 100mm to 150mm monitoring well screen. Simply sleeve the filter sock over the pvc screen before installation. -
The Flexipoint is pointed bottom end cap made from recycled plastic. It is long enough to be installed on either the male or female threaded end of the 50mm slotted PVC screen, without a need to cut off the female thread. -
Disposable Bailer Cord Our disposable bailer cord is mainly used to deploy bailers and sleeve samplers. Made from polypropylene, it is well suitable for all types of ground water sampling. The 2.5mm diameter twine is packaged in a convenient 100m spool and also made in Australia. It has a manufacturers stated break load of approximately 195kg, so can be used for a range of applications.
-
These convenient socks pre-filled with approximately 312.5 g of EOx® Powder. They are 38mm diameter, suitable for 50mm wells or larger. EOx® is a granular powder of calcium peroxide that provides slow and steady oxygen release for long-term aerobic biodegradation. Suitable for enhanced aerobic biodegradation of BTEX, PAHs, DRO, MTBE, VC and other complex contaminants in soil and groundwater. -
The WC25Gas has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. -
The WC100GAS has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. The WC100Gas can also be locked in place with a padlock or by using a security screw or both for extra security. It has a large wing nut, designed to make it easier to tighten or release the plug. It comes with a ring below so you can hang/attach tubing, skimmers or sleeve samplers in the well. -
Our largest standpipe cover is the all recycled plastic SP272. This round standpipe cover has a 250mm internal diameter which means there's even enough room for 150mm PVC well installations. The mottled, multi-coloured look is a result of the post-consumer plastic items being melted together to make a unique and great looking cover. Ideal for landfill or remediation applications where a larger diameter cover is often desired. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. -
Corrosion Protection for Standpipe Covers: Certain site requirements or tender specifications require galvonised steel. The standpipe also has a unique non-binding swivel hinge for long life, which is protected from rain. Traditional looking standpipe covers have hinges which are exposed to the elements and therefore prone to corrosion and eventually seizing up or dropping off. Our unique design has addressed this weakness. The 100mm square galvanised steel standpipe covers have a unique non-binding 'hidden hinge' design which provides a rain proof cover. These low-cost covers have a galvanised / silver finish for corrosion protection. -
This all pneumatic box will shut off the air supply to down-hole pumps when the tank, drum or IBC becomes full. This prevents overfilling of the drum and creating a spill. Ideal for LNAPL recovery projects. Comprising of a separate control box and tank sensor, the control box can be mounted separately from the drum. The tank sensor is screwed into the drum and connected to the control box by a small air hose. Being all pneumatic makes this inherently intrinsically safe. -
The 100mm well plug is manufactured from a recycled composite glass filled polymer that will not corrode, and is stronger than steel, pound for pound. The center locking mechanism allows a padlock to be secured in a variety of positions, offering more flexibility in applications with limited space. Constructed of recycled composite glass-filled polymer which is stronger than steel pound for pound, the 100mm well plug is designed for years of worry-free use. The wing nut design with a recessed grip allows a padlock (not included) to be easily installed. The 100mm well plug has a tethering attachment at the base for use with a variety of instruments, features no metal parts, and can be disassembled for easy decontamination. The standard well plug and GasCap is available for 100mm wells. -
Biogone ziplock bags are landfill biodegradable and well suited for PID soil headspace sampling. Available in packs of 25 or cartons of 500. -
Made from post-consumer recycled plastic (i.e. bottles and other plastic waste sent for recycling), these stylish upright covers give your monitoring well a professional finish. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Economy Standpipe Cover is a thinner walled option for budget limited projects. They have a recycled plastic inner core and a bright yellow outer layer for high visibility.
-
The TriCap-LOG has been specifically designed for use with submersible groundwater level logging devices. Just like the TriCap-GAS, the hollow shaft intersects a horizontal side hole through the shaft near the bottom. An elbow fitting installed in the top enables the well to be vented to the atmosphere. Attach optional tubing to allow the vent port to be raised up above any surface water and prevent it from flowing into the well through the vent. A stainless spring clip is also provided for easy logger attachment. The Tricap-Log is the perfect choice for use with submersible groundwater logging devices. It features an elbow fitting which vents the well to atmosphere, and a unique stainless spring clip for easy logger attachment. The TriCap is made from recycled plastic for sustainability and enables a groundwater monitoring well to be sealed and locked. -
An environmental monitoring well cap or plug made from post-consumer recycled plastic for sustainability. The TriCap provides:- Strong protection for your monitoring wells
- Self locking option with additional stainless steel security bolt, using a special key tool or allen key
- Hanger cable holes on bottom end of shaft
- Fully sustainable, made from recycled plastic waste
- Wide rubber ring provides a water tight seal
- Also available in orange
-
The TriCap-GAS has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. The TriCapGas can also be locked in place with a padlock or by using a security screw or both for extra security. The TriCap has a partially hollow shaft that intersects a horizontal side hole near the bottom. This allows the well gas to be drawn in through the side hole and out the top. The side hole also serves to hang sampling or monitoring devices off the bottom of the cap while at the same time gas samples can be taken out through the shaft and out the gas quick connect fitting.
All products
This range of products is what sets us apart, and has resulted in government awards for innovation & sustainability. Add sustainability to your monitoring well installations, and reduce your plastic waste footprint.
Our Products
Copyright © 2024 FieldTech Solutions. All rights reserved.
