Liquinox is a concentrated, anionic detergent for manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Extremely mild and completely soluble in hard and soft water. USDA authorized. Dilute 1:100. pH 8.5
Used to clean: Healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, sampling apparatus, catheters, tubing, wine glasses, clean rooms, medical devices, optical parts, electronic components, pharmaceutical apparatus, cosmetics manufacturing equipment, metal castings, forgings and stampings, industrial parts, pipes, tanks and reactors. Authorized by USDA for use in federally inspected meat and poultry plants. Passes inhibitory residue test for water analysis. Used for phosphate sensitive analysis ware. FDA certified.
Used to remove: Soil, grit, grime, slime, grease, oils, blood, tissue, particulates, deposits, chemical and solvents.
Surfaces cleaned: Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, cement and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Used for art restoration. Corrosion testing may be advisable.
Cleaning method: Soak, brush, sponge, cloth, ultrasonic, flow through clean-inplace. Will foam—not for spray or machine use.
Directions: Make a fresh 1% solution (2 1/2 Tbsp. per gal., 1 1/4 oz. per gal. or 10 ml per liter) in cold, warm or hot water. If available, use warm water. Use cold water for blood stains. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe or ultrasonic method. Not for spray machines, will foam. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic and metal surfaces. Corrosion testing may be advisable. Formerly known as LIQUI-NOX.
Tech-notes: Is Alconox detergent the same as Liquinox detergent ?
-
Sterile-filter and store 150 mL up to 1000 mL of cell culture media using trusted Stericup® filter units, which include a bottle-top filter and a receiving flask, and Steritop® bottle-top filters.
-
Mi605 is a portable, microprocessor-based, Dissolved Oxygen meter with automatic calibration and temperature compensation (ATC) specifically designed for spot sampling applications. Dissolved Oxygen measurements can be displayed in parts per million (ppm=mg/L) or in % of saturation. The temperature is indicated in Celsius from 0 to 50°C with 0.1 resolution. The meter compensates salinity and altitude automatically after manual input. Calibration is very simple and fast: just expose the polarographic Dissolved Oxygen probe MA840, supplied with the instrument, to air and press the CAL button. No need for chemical solutions! A HOLD button allows the user to freeze the reading on the LCD. The low battery indicator and the easy to replace screw on cap membranes make the Mi605 a compact instrument and ideal for all applications: aquaculture, wastewater, environmental and educational. -
Mi415 Turbidity MeterTurbidity refers to the concentration of undissolved, suspended particles present in a liquid. Turbidity is a measure of the clarity of a sample, and for potable water applications, turbidity is a good indicator of water quality. Turbidity Measurement is achieved by analysing the amount of light refracted from suspended particles such as clay, silt and organic material. By measuring turbidity, by photometric or tube methods, it is possible to estimate suspended solids content.
The Mi415 has two operating ranges; 0.00 to 50.00 FNU, and 50 to 1000 FNU that can accommodate the most turbid condition you may encounter. The Mi415 is supplied in a hard carrying case, complete with reagents.
-
Measures 4 parameters with 1 single probe. Mi805 offers you a combination of pH, Conductivity, total Dissolved solids and temperature measurements. You can select from a range of calibration buffers and also the temperature scale (°C or °F) can be selected. The multi-parameter probe MA851D/1, includes pH/EC/TDS and temperature, all in one rugged handle. Other features include different TDS factors from 0.45 to 1.00, and a range of temperature coefficients (ss) from 0.0 to 2.4% for greater consistency and reproducibility. The Stability Indicator prompts the user when the reading stabilizes. The Auto-Hold Function automatically freezes reading for later viewing. Large and Easy-to-Read display provides simultaneous readings of pH and Temperature or EC/TDS and temperature. -
The Milwaukee Low FLow Kit is a convenient and reliable multi-parameter water quality monitoring system, designed specifically for low-flow groundwater sampling at a budget price. The Milwaukee Low Flow Kit contains everything you need for accurately monitoring water quality parameters during low-flow groundwater sampling, in a convenient and rugged carry case. -
Mi306 Conductivity / TDS / NaCl / Temperature Professional Portable Meter
Mi306 is a waterproof portable logging microprocessorbased Conductivity / TDS / NaCl / Temperature meter. The autoranging feature of the EC and TDS ranges automatically sets the meter to the scale with the highest possible resolution. The Auto Endpoint (HOLD) feature automatically freezes the display when a stable reading is reached.
The measurements are automatically (ATC) or manually (MTC) compensated for temperature. The temperature coefficient value is user selectable. It is possible to disable the temperature compensation and measure the actual conductivity (NoTC). The Battery Error Preventing System (BEPS) switches the meter off when the batteries are too weak to support proper function. The meter can store measurements in memory by logging function for retrieval at a later time upon user request.
Mi306 also allows data transfer to computer through the RS232 port. Double LCD displays, for simultaneous readings of the specific conductivity and temperature.
-
Measure the pH in soil easily using the Milwaukee Instruments MW101-SOIL pH meter kit. This portable meter is also suitable for use in a wide range of applications such as education, agriculture and horticulture, as well as water and environmental analysis.MW101 performs pH measurements with a 0.01 pH resolution and with manual temperature compensation.The meter is supplied with pH electrode and calibration solutions.
-
Measures 4 parameters with 1 single probe, offering a combination of pH, Conductivity, total Dissolved solids and temperature measurements. You can select from a range of calibration buffers and also the temperature scale (°C or °F) can be selected. The multi-parameter probe MA851D/1, includes pH/EC/TDS and temperature, all in one rugged handle. Other features include different TDS factors from 0.45 to 1.00, and a range of temperature coefficients (ss) from 0.0 to 2.4% for greater consistency and reproducibility. The Stability Indicator prompts the user when the reading stabilizes. The Auto-Hold Function automatically freezes reading for later viewing. Large and Easy-to-Read display provides simultaneous readings of pH and Temperature or EC/TDS and temperature.
-
The Mityvac Silverline Hand Pump can be used for filtering water samples, using either vaccum or pressure to move the sample through the filter. Most commonly they are used on the vaccuum setting in conjunction with the Stericup filters. -
A Class E Rated Cover for Heavy Duty Applications The Nondo CE180 monitoring well cover is an all cast iron, 'Class E' rated well cover, designed for extra heavy duty applications. It is ideal for 50mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D & Class E. The small 180mm OD makes it ideal for drillers who typically use a 200mm concrete corer. The CE180 has two new concepts for groundwater monitoring well covers:- A special shaped skirt to allow a wider concrete support lip and with a larger opening than comparable covers of similar diameter (116mm opening)
- Bottom sealed bolt holes with removable grub screws for easy bolt hole cleaning if necessary. This ensures ultimate sealing from surface water ingress
-
A better designed well cover using recycled plastic for sustainability The Nondo Eco 180 well cover is designed with sustainability in mind. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Nondo Eco 180 is made entirely from recycled plastic and has been tested to meet load bearing requirements for traffic suitability for Australian Standard AS3996 Class D.- One piece gasket seals both the lid and around bolt holes heads to prevent surface water ingress, and completely seals the well
- 2 stainless steel bolts, counter sunk with 8mm hex for secure lid clamp down
- 180mm diameter OD, large 146mm ID, 122mm between bolt holes
- High strength recycled plastic (HDPE & Delrin) is resistant to petroleum products
- Unlike steel, recycled plastic will never rust
- Lower cost than traditional cast iron covers
- Light weight only 1.2kg but rated for heavy trucks
- Load tested to AS3996 Class D traffic rating
- Ideal for 50mm monitoring wells
- The all recycled plastic Eco180 will never rust leaving your installation work always looking good
- No more finger crushing under heavy lids, the Eco180 lid is lightweight with no sharp edges
-
A Large Well Cover with Cast Iron Lid The Nondo Maxi 320 monitoring well cover is a large flush-mounted well cover with a cast iron lid and base, and is ideal for 100mm or larger monitoring well installations. The 337mm (OD) diameter cover is secure with 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be also levered up with a screwdriver. Due to its weight, we have designed a lifter which allows the lid to be removed safely from the base (see video below). -
A lower cost Class B option
The Nondo Maxi 320 - Class B monitoring well cover is a large flush-mounted well cover with a cast iron lid and base, and is ideal for 100mm or larger monitoring well installations. The Nondo Maxi 320 - Class B has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class B. Please note that it is not suitable for road traffic. The 337mm (OD) diameter cover is secure with 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be also levered up with a screwdriver. Due to its weight, we have designed a lifter which allows the lid to be removed safely from the base (see video below). -
A Large Well Cover with Non-Metallic Lid The Nondo Maxi SMC well cover has a non-metallic lid, making it ideal for wells with instrumentation inside requiring data transmission through the lid, such as a telemetry system. It has an SMC (sheet moulding compound) lid, smc base ring, and a sheet metal skirt. The traditional looking 2-bolt design has a completely sealed lid with a unique one piece gasket to prevent any surface water ingress, and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D. The 337mm diameter cover has an anti-slip dimpled surface on the lid, 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be levered off with a screwdriver. Optional add on: Nondo Safety Lifter Use the Nondo Safety Lifter tool to safely remove and reinstall the heavy lid and to avoid crushed fingers.
-
A lower cost Class B option **Please note this well cover is a Class B well cover that is not suitable for road traffic.** The Nondo Maxi SMC B well cover has a non-metallic lid, making it ideal for wells with instrumentation inside requiring data transmission through the lid, such as a telemetry system. It has an SMC (sheet moulding compound) lid, a cast iron base ring, and a plastic skirt. The traditional looking 2-bolt design has a completely sealed lid with a unique one piece gasket to prevent any surface water ingress, and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class B. The 337mm diameter cover has an anti-slip dimpled surface on the lid, 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be levered off with a screwdriver.
-
The Nondo Mini monitoring well cover is our budget bolt-down, flush mounted well cover. It is designed to be used for monitoring wells or for soil vapour installations. With the bolts outside the inner working space, the Nondo Mini gives you maximum internal room for such a small cover. Features:- 2 counter-sunk flush bolts to reduce the risk of trip hazards, as there are no protruding bolt heads
- High strength cast iron in black epoxy
- White powder coated lid
- Large internal opening of 124mm (98mm Bolt head clearance)
- Small 150mm outside diameter
- Ideal for standard 50mm monitoring wells or soil vapour implants
-
The Nondo Safety Lifter / Multi Tool enables a safe way to remove our steel well cover lids and comes with all the necessary allen keys for our well covers and TriCap well plug. -
A medium sized well cover with some big features The Nondo180 monitoring well cover contains a high quality machined cast iron lid and base, with a strong plastic skirt. It is ideal for 50mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D. The small 180mm OD makes it ideal for drillers who typically use a 200mm concrete corer. -
A Class E Rated Cover for 100mm Wells The Nondo200 contains high quality machine cast iron lid and base, with a strong plastic skirt. It is ideal for 100mm monitoring wells and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class E, which is typically for heavy duty applications. The large 250mm OD, 200mm ID (164mm between bolt holes) makes the Nondo200 ideal for remediation wells, or in situations where a 'GasClam' sensor is to be installed. -
Silicone Peristaltic Tubing is flexible and soft, making it suitable for peristaltic pumps. FieldTech Solutions Peristaltic Silicone Pump tubing is available in 15 m individually wrapped coils, available in these sizes:- 1/8" ID / 1/4" OD, 15m roll
- 4.8mm ID x 9.5mm OD, 15m roll, for use with Geotech Peristaltic Pump
- 1/4" ID / 3/8" OD, 15.2m roll
- 5/16" ID / 1/2" OD (7.9mm ID x 12.7mm OD) 15m roll
-
The portable tubing reel is a great solution for tubing management when groundwater sampling. Made from high quality steel and powder coated blue for a professional finish. It folds down flat to easily fit in the boot of a car, and can be assembled in less than a minute. It will hold either 1 or 2 reels of BioTubing with ease.
-
Prepacked Screen for Environmental Monitoring Wells- Great solution for sites prone to collapsing sands
- Ensures accurate placement of filter media across desired interval
- No adapters required, will thread directly onto our casing
- Available in 50mm (PN18), 1.5m lengths
- Male / Female threaded
- Bottom end caps available, including the universal 'FlexiPoint 50'
-
The QED Soil Hydrocarbon Analyser is a total organic hydrocarbon in soil and groundwater analyser that can accurately analyse both soil samples and water samples on site. Suitable for direct on-site detection and analysis, it can be synchronized with the on-site investigation and sampling team or in the field. During excavation or in the early stage of pollution, quickly determine the source of gasoline (GRO) or diesel (DRO) or other oil pollution. The QED Hydrocarbon Analyser can reliably identify petroleum hydrocarbon in the sample, as it uses the same solid state micro-spectrometers used by NASA to provide unrivalled accuracy in identifying petroleum hydrocarbons and PAHs. The QED Soil Hydrocarbon Analyser can also solve the error of interfering substances caused by natural plant corruption in current laboratory analysis methods. The QED Soil Hydrocarbon Analyzer can reduce the laboratory analysis costs and provide a faster and more convenient quick screening qualitative and quantitative method on site. Watch video demonstation: -
Biodegradable Cleaning Concentrate Quantumclean is a highly effective decontamination and cleaning liquid which is also biodegradable. It can be used to clean pumps, bailers, tubing, soil augers, or any sampling equipment where cross-contamination between sampling locations is a concern. Quantum clean can also be used to clean radioactive contamination. Quantumclean is a concentrated mixture of surfactants, chelating agents, stabilising agents and alkali salts in aqueous solution. The mixture is non-flammable, completely water miscibleand biodegradable. Quantum clean does not containphosphates or poly-fluoroalkyl substances. -
Simply the best way to manage tubing for low-flow groundwater sampling
- The Rapid Reel is a simple cardboard tubing dispenser for our biodegradable tubing for low-flow sampling
- Low-flow sampling has just been made easier
- Simply connect the tubing to your sampling pump then deploy down the well, letting the tubing flow easily out of the Rapid Reel box
- Clean and simple
Testimonials:
"I used the rapid reel last time I was groundwater sampling and thought it was great. Made life so much easier, especially on the deep wells." (Samantha Walsh - Landserv)
“I have to say, when I saw the rapid reel on your website, memories sprung to mind of countless times spent fighting soggy cardboard reels and unruly tubing. The Rapid Reel did live up to my expectations. It definitely helped keep my ute/workspace tidier, and it was quicker and easier to reel out the quantity I needed." (Anonymous - Ventia) -
Our range of Premium Graded Sand and Gravel is produced from water washed high purity silica. Dry screening ensures excellent control of Particle Size Distribution. The sand and gravel is tested and controlled to rigorous standards which ensure consistent physical properties resulting in predictable and repeatable performance. Sibelco Australia actively manages a Quality Management System certified to ISO9001:2008. High quality Gravel typically finds use in applications such as water filtration, drilling and flooring. The following typical properties may help you to determine the product which will best suit your application. -
Screen and Casing Bore Pipe for Monitoring Well Installations Cut your costs for well installation and operate more sustainably on site. Each pair of 3m lengths of pipe is sleeved in biodegradable plastic, which means the sleeve will biodegrade away when disposed to a landfill, allowing you to help reduce the amount of plastic waste build-up. Most environmental screen and casing is wrapped in conventional plastic but this is adding to our plastic waste problem. The FieldTech Solutions Wellscreen is wrapped in biodegradable plastic preventing further plastic waste. We also use biodegradable packing tape in our shipments. 50mm casing and screen is made from uPVC and to class 18 size and is manufactured following the Australian Standard for Monitoring Wells. Each piece has a coarse male/female thread for easy field assembly and is o’ring sealed. Our biodegradable plastic wrapping:- Will only biodegrade once in a microbe rich environment such as a landfill
- Does not require high oxygen or temperature to biodegrade such as in a commercial compost
- Helps you to operate more sustainably
-
These general multipurpose gloves are suitable for multiple applications and trades including gardening, parts handling and tool operations. Reduced thickness ensures optimum tactility when working on delicate projects, provides comfort and flexibility during extended wear. These reusable landfill biodegradable multipurpose gloves can be disposed of in the general rubbish bin, and once disposed to landfill, biodegradation is accelerated approximately 90% than conventional multipurpose gloves, producing an organic matter (a natural fertiliser) and no microplastics. For further information click here. -
Landfill-biodegradable nitrile disposable gloves that provide comfort, dexterity and protection from chemicals. Once these landfill-biodegradable nitrile gloves are disposed of to landfill, biodegradation is accelerated approximately 90%+ faster than conventional nitrile gloves, producing an organic matter (a natural fertiliser) and no microplastics. *Biodegradation has been verified by independent laboratory using ASTM D5511 for anaerobic landfill conditions. -
Landfill-biodegradable nitrile disposable gloves that provide comfort, dexterity and protection from chemicals. *Biodegradation has been verified by independent laboratory using ASTM D5511 for anaerobic landfill conditions. -
LNAPL Skimming Socks for 50mm Monitoring Wells The easiest way to remove small amounts of fuels from monitoring wells is with these low-cost skimming socks. Each sock holds about 500ml. -
Low Cost, No Purge Groundwater Sampler These types of samplers are fast becoming a popular method for groundwater sampling on many Australian sites. Sleeve samplers make groundwater sampling a simple, three-step operation that can be more effective than purging or low-flow sampling. The low-cost, disposable sleeve captures a core of water from any discrete interval in the screened portion of the well with no change in water level and minimal disturbance to the water column. The sleeve is sealed except during sample collection, then re-seals itself, assuring that a formation quality sample is recovered. The tripod stand option provides a convenient place to hang a full sampler while filling sample bottles. Independent laboratory testing confirms that sleeve samplers are PFC/PFAS-free, based on analysis for 28 different PFCs at extremely low detection limits. -
Our 1 litre slug is made for performing a 'slug test', which enables hydraulic conductivity estimation in monitoring wells. Designed to fit within a 50mm well and displace 1L of water. Custom sizes can also be made for larger wells, or multiple slugs can be used together to displace more water in the monitoring wells. -
Soil Vapour Implants can be used for permanent or temporary installations. They can be used for soil gas sampling, air sparging, and even groundwater sampling. They are an accurate and economical way to sample soil vapour. These popular mesh implants come with a barb on top to connect to 1/4” Teflon® tubing. A threaded bottom connection allows connection to a weight to pull the implant down during installation. The implant mesh allows easy passage of the soil vapours to pass in from the target zone into the tubing. The barb allows leak free and tool-less connection of the Teflon® or other similar tubing up to the surface. A range of surface connection fittings are available to provide flexibility to various connection methods at the surface. Installation involves drilling or augering a hole down to the target zone, placing in an implant with connected tubing. Then backfilling around the implant with sand and gravel pack across the target zone. Finally filling back in with soil and or bentonite to make a seal from the surface. The top end of the tubing is where the soil vapour sample is drawn from. When not in use keep this capped.Do I need a weight? Due to the coiled Teflon® tubing acting like a spring, it can bind on the sides of the bore. For shallow installations of a few metres, a weight may not be necessary. For deeper installations a weight is recommended to pull the implant down to the bottom.
-
-
Biodegradable Sleeving for Sonic Rigs Now you can reduce your plastic footprint on sonic rig sampling jobs by using landfill-biodegradable HDPE sleeving. The clear sleeving has a 203mm lay-flat width, and a thickness of 150 micron. Suitable for Geoprobe, Boart Longyear, and any other sonic rigs which use 8" lay-flay sleeving. -
Made from post-consumer recycled plastic (i.e. bottles and other plastic waste sent for recycling), these stylish upright covers give your monitoring well a professional finish. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Economy Standpipe Cover is a thinner walled option for budget limited projects. They have a recycled plastic inner core and a bright yellow outer layer for high visibility.
-
Well Development or Sampling The stainless steel bailer is ideal for both groundwater sampling & well development. The all stainless steel construction and check ball allows for rapid decontamination between wells. The tapered top is designed to avoid hang ups in the well, and smooth raising & lowering. A 45mm diameter enables it to be used in standard 50mm monitoring wells. Reusable equipment such as this helps reduce the amount of disposable waste, and adds sustainability to your operation. -
Our largest standpipe cover is the all recycled plastic SP272. This round standpipe cover has a 250mm internal diameter which means there's even enough room for 150mm PVC well installations. The mottled, multi-coloured look is a result of the post-consumer plastic items being melted together to make a unique and great looking cover. Ideal for landfill or remediation applications where a larger diameter cover is often desired. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. -
Made from post-consumer recycled plastic (i.e. bottles and other plastic waste sent for recycling), these stylish upright covers give your monitoring well a professional finish. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Heavy Duty Standpipe Cover range is thick walled (23mm) HDPE (high density polyethylene) to give you a very strong, chemically inert and petroleum resistant well cover. They are available in blue or black with large bright orange reflectors for high visibility.
-
Lightweight and Rugged The SP155 is the largest of our plastic Standpipe Covers. With a 145mm ID it is ideal for LFG installations where using a 'Gas Clam' instrument for continuous LFG monitoring may be desired.- Ideal for 100mm well installations
- Plastic standpipe cover, will not rust
- A wider opening (145mm ID) for use with a "Gasclam" or other instrumentation
- Strong protection for your monitoring wells with a professional, stylist finish
- High security with one way security screws to deter tampering
- High visibility yellow colour
- Safer to use with no sharp steel edges
-
These Standpipe Covers are designed to be simple and robust, with a unique large clearance hinge that will not rust and bind, and an attractive bright blue powder coated finish. A padlock can also be used on the lid for extra security. 3 different sizes to choose from:- SPRB114 - 114mm diameter
- SPRB165 - 165mm diameter
- SPRB219 - 219mm diameter
-
A New Concept for Standpipe Covers - Hidden Hinge Design The 100mm square yellow steel standpipe cover has a unique hidden hinge design which provides a rain proof cover. Traditional looking standpipe covers have hinges which are exposed to the elements and therefore prone to corrosion and eventually seizing up or dropping off. The unique design has addressed this weakness. These low-cost covers have a bright yellow powder coated finish, and are also available as galvanised. -
-
The Swing Sampler enables you to reach out up to 2.4m from a river bank or shore to take a 1.2L surface water sample. It can also be used for reaching into tanks, drums, or any difficult locations with up to 90 degrees rotation on the free-swinging head. The sample jar has a volume of 1.2L and can be re-used (recommended to use Decon 90 to clean between samples). The re-useable sample jar is made from landfill-biodegradable plastic, so when it eventually gets disposed to a landfill it will biodegrade.
