- Strong protection for your monitoring wells
- Self locking option with additional stainless steel security bolt, using a special key tool or allen key
- Hanger cable holes on bottom end of shaft
- Fully sustainable, made from recycled plastic waste
- Wide rubber ring provides a water tight seal
- Also available in orange
-
An environmental monitoring well cap or plug made from post-consumer recycled plastic for sustainability. The TriCap provides: -
The TriCap-GAS has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. The TriCapGas can also be locked in place with a padlock or by using a security screw or both for extra security. The TriCap has a partially hollow shaft that intersects a horizontal side hole near the bottom. This allows the well gas to be drawn in through the side hole and out the top. The side hole also serves to hang sampling or monitoring devices off the bottom of the cap while at the same time gas samples can be taken out through the shaft and out the gas quick connect fitting. -
Landfill Leachate, and Remediation Pumps: - Fully Automatic, Float Actuated Pumps The Viridian range of pumps (VP Pumps) are designed specifically for pumping landfill leachate, landfill gas condensate and contaminated groundwater. As no down-well level control device is required, the VP pumps lend themselves to being part of a multi-well pumping system. This makes overall system control very simple. With minimal training, the site personnel quickly become confident with both pump and system. Available in a range of sizes and variations, and capable of discharging up to 1.1 litres of liquid per cycle. The bottom-filling versions are specifically designed for the harsh conditions of pumping landfill leachate. Available as a top loading version, for groundwater remediation applications, as well as a short version, and the 'LDD' (low drawdown) when minimum liquid head is vital. The VP2 and VP3 range has a reduced discharge capacity but it is ideal for smaller borehole sizes. As the VP pumps are driven by compressed air, a multi-well system would have an air-main connecting each pump - a far safer power source than electricity cables and less costly. VP Pumps also do not require an external form of control. Pulse Counters, for volume and flow rate measurement also available. Download Brochure
VP Pumps Range
-
The Waterra 1 UP Peristaltic Sampling Pump can be powered by 110 and 220V AC, external 12VDC or its 12V internal battery. Suction lifts up to 8.5m. 4 Battery Choices LIFE Batteries are Lithium Iron Phosphate batteries that weigh about one half the weight of the SLA (Sealed Lead Acid) batteries. LIFE batteries a have better discharge curve, maintaining higher voltages for longer. Available in 20 Ahr and 12 Ahr formats. A LIFE 12 Ahr 1 UP Pump weighs less than 8.1kg and the 20 AHr unit weighs less than 9.5kg. SLA Batteries are Sealed Lead Acid conventional batteries that are a less expensive than LIFE batteries, but weigh about twice as much. Available in 20 Ahr and 12 Ahr formats. -
The Hydrolift is a portable, 240v operated electric device that is used to automate the operation of the Waterra Pump System. This actuator is perfect for purging and sampling 50mm diameter monitoring wells up to 60m deep. In special circumstances it can lift up to 90m. This electrical Tubing Actuator is optimized to operate with the Standard Flow System up to its maximum effective depth and will operate with the High Flow System up to a depth of 45m. This Tubing Actuator is the ideal choice for the frequent user of the Waterra Pumping System with moderate to extreme pumping requirements (Low, Standard and High Flow). Using the Hydrolift will result in a big boost to your field sampling program. The Hydrolift is powered by a 3/4 horsepower (560 watts) electric motor and generates a 4 inch (10 cm) stroke at up to 140 cycles per minute. The Hydrolift weighs about 16 kg and requires an electrical power supply of at least 1000 watts. *Please note the Hydrolift requires a generator to power it. See image 2 for an animation on how the system works. -
The Waterra PowerPack PP1 provides the mechanical actuation for pumping with inertial pumps to depths of over 60m, in a fully portable, single operator power unit. At 13 kg, the PowerPack PP1 provides outstanding pumping performance. The PP1 is powerful enough to lift water from over 60m depth using the Standard Flow System, and is so compact that it fits onto a back-pack frame. The PowerPack PP1 incorporates clamps for Waterra High Flow and Standard tubing sizes (adaptors are available for smaller tubes). A Honda GX-25 series, 1.0 horsepower, 4 stroke, gasoline motor powers this device, which can run for approximately 1 hour without refuelling. -
The WC100GAS has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. The WC100Gas can also be locked in place with a padlock or by using a security screw or both for extra security. It has a large wing nut, designed to make it easier to tighten or release the plug. It comes with a ring below so you can hang/attach tubing, skimmers or sleeve samplers in the well. -
The WC25Gas has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. -
Bioremediation Products Fieldtech Solutions is proud to represent EOS Remediation in Australia. EOS Remediation is the leading provider of bioremediation products that re-engineer the groundwater environment, transforming contaminants into non-toxic end products. EOS Remediation’s products are ecologically sustainable (USDA Certified BioPreferred Products), and cost-effective with proven results. Most of these products are being manufactured locally here in Australia. Their diverse family of products, driven by extensive research and development, are available to meet a variety of project needs. If you have a current bioremediation project, and you are you looking to calculate the volume of EOS product required, we request that you please fill in the Site Evalution Form and email back to us so we can help. Not all fields may be known but please fill in as much information as you can. Download Site Evaluation Form
-
These convenient socks pre-filled with approximately 312.5 g of EOx® Powder. They are 38mm diameter, suitable for 50mm wells or larger. EOx® is a granular powder of calcium peroxide that provides slow and steady oxygen release for long-term aerobic biodegradation. Suitable for enhanced aerobic biodegradation of BTEX, PAHs, DRO, MTBE, VC and other complex contaminants in soil and groundwater. -
The Mityvac Silverline Hand Pump can be used for filtering water samples, using either vaccum or pressure to move the sample through the filter. Most commonly they are used on the vaccuum setting in conjunction with the Stericup filters. -
The TriCap-LOG has been specifically designed for use with submersible groundwater level logging devices. Just like the TriCap-GAS, the hollow shaft intersects a horizontal side hole through the shaft near the bottom. An elbow fitting installed in the top enables the well to be vented to the atmosphere. Attach optional tubing to allow the vent port to be raised up above any surface water and prevent it from flowing into the well through the vent. A stainless spring clip is also provided for easy logger attachment. The Tricap-Log is the perfect choice for use with submersible groundwater logging devices. It features an elbow fitting which vents the well to atmosphere, and a unique stainless spring clip for easy logger attachment. The TriCap is made from recycled plastic for sustainability and enables a groundwater monitoring well to be sealed and locked. -
The 100mm well plug is manufactured from a recycled composite glass filled polymer that will not corrode, and is stronger than steel, pound for pound. The center locking mechanism allows a padlock to be secured in a variety of positions, offering more flexibility in applications with limited space. Constructed of recycled composite glass-filled polymer which is stronger than steel pound for pound, the 100mm well plug is designed for years of worry-free use. The wing nut design with a recessed grip allows a padlock (not included) to be easily installed. The 100mm well plug has a tethering attachment at the base for use with a variety of instruments, features no metal parts, and can be disassembled for easy decontamination. The standard well plug and GasCap is available for 100mm wells. -
Mi415 Turbidity MeterTurbidity refers to the concentration of undissolved, suspended particles present in a liquid. Turbidity is a measure of the clarity of a sample, and for potable water applications, turbidity is a good indicator of water quality. Turbidity Measurement is achieved by analysing the amount of light refracted from suspended particles such as clay, silt and organic material. By measuring turbidity, by photometric or tube methods, it is possible to estimate suspended solids content.
The Mi415 has two operating ranges; 0.00 to 50.00 FNU, and 50 to 1000 FNU that can accommodate the most turbid condition you may encounter. The Mi415 is supplied in a hard carrying case, complete with reagents.
-
Our largest standpipe cover is the all recycled plastic SP272. This round standpipe cover has a 250mm internal diameter which means there's even enough room for 150mm PVC well installations. The mottled, multi-coloured look is a result of the post-consumer plastic items being melted together to make a unique and great looking cover. Ideal for landfill or remediation applications where a larger diameter cover is often desired. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical.
-
Made from post-consumer recycled plastic (i.e. bottles and other plastic waste sent for recycling), these stylish upright covers give your monitoring well a professional finish. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Heavy Duty Standpipe Cover range is thick walled (23mm) HDPE (high density polyethylene) to give you a very strong, chemically inert and petroleum resistant well cover. They are available in blue or black with large bright orange reflectors for high visibility.
-
Dissolved Oxygen Smart Sensor The Model 32 is a solid state DO sensor with built-in smarts which outputs to Modbus RTU through RS232 hardware. It is designed to be connected into existing hardware which accepts the Modbus RTU protocol. The Model 32 sensor is extrememly rugged and reliable, utilising solid state technology for DO measurement. “I’m glad we got onto these, they’re great sensors, the M32 we have deployed is running like clockwork.” Lia - Hydrographer. VIC. -
Made from post-consumer recycled plastic (i.e. bottles and other plastic waste sent for recycling), these stylish upright covers give your monitoring well a professional finish. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Economy Standpipe Cover is a thinner walled option for budget limited projects. They have a recycled plastic inner core and a bright yellow outer layer for high visibility.
-
Lightweight and Rugged The SP155 is the largest of our plastic Standpipe Covers. With a 145mm ID it is ideal for LFG installations where using a 'Gas Clam' instrument for continuous LFG monitoring may be desired.- Ideal for 100mm well installations
- Plastic standpipe cover, will not rust
- A wider opening (145mm ID) for use with a "Gasclam" or other instrumentation
- Strong protection for your monitoring wells with a professional, stylist finish
- High security with one way security screws to deter tampering
- High visibility yellow colour
- Safer to use with no sharp steel edges
-
A New Concept for Standpipe Covers - Hidden Hinge Design The 100mm square yellow steel standpipe cover has a unique hidden hinge design which provides a rain proof cover. Traditional looking standpipe covers have hinges which are exposed to the elements and therefore prone to corrosion and eventually seizing up or dropping off. The unique design has addressed this weakness. These low-cost covers have a bright yellow powder coated finish, and are also available as galvanised. -
Corrosion Protection for Standpipe Covers: Certain site requirements or tender specifications require galvonised steel. The standpipe also has a unique non-binding swivel hinge for long life, which is protected from rain. Traditional looking standpipe covers have hinges which are exposed to the elements and therefore prone to corrosion and eventually seizing up or dropping off. Our unique design has addressed this weakness. The 100mm square galvanised steel standpipe covers have a unique non-binding 'hidden hinge' design which provides a rain proof cover. These low-cost covers have a galvanised / silver finish for corrosion protection. -
Passive skimmers for fuel removal The KV Passive Skimmers utilize a patented membrane material to separate fuel from water. Subsurface fuel spills are recovered by membrane separation so the fuel simply falls into the passive "bailer" reservoir. These fuel bailers easily recover LNAPL such as petrol and diesel from groundwater.
KV50 and KV100 Dimensions
-
These Standpipe Covers are designed to be simple and robust, with a unique large clearance hinge that will not rust and bind, and an attractive bright blue powder coated finish. A padlock can also be used on the lid for extra security. 3 different sizes to choose from:- SPRB114 - 114mm diameter
- SPRB165 - 165mm diameter
- SPRB219 - 219mm diameter
-
LNAPL Skimming Socks for 50mm Monitoring Wells The easiest way to remove small amounts of fuels from monitoring wells is with these low-cost skimming socks. Each sock holds about 500ml. -
Prepacked Screen for Environmental Monitoring Wells- Great solution for sites prone to collapsing sands
- Ensures accurate placement of filter media across desired interval
- No adapters required, will thread directly onto our casing
- Available in 50mm (PN18), 1.5m lengths
- Male / Female threaded
- Bottom end caps available, including the universal 'FlexiPoint 50'
-
Using syringes for groundwater filtration in the field is a popular low-cost option. It can be an ideal choice if you are not using a pump, and have a manual device such as a bailer. When using a syringe 50ml at a time can be pushed through a filter. Small low-capacity filters can be used where turbidity is low. However if turbidity is high then it may be better to use a high capacity filter such as the AquaPore Biodegradable Filter Capsule. Syriges are available in luer-lock, catheter tipped, or eccentric tipped varieties. -
Plug & Play Compatability - Smart Sensors The InsiteIG Single Channel Analyser is a unique system that combines advanced electronics with solid-state, smart sensors. The analyser will accept any standard InsiteIG DO, SS, pH, or ORP sensor and automatically configures for the correct operation. The system allows for flexible and economical process monitoring and control. Fluorescence Dissolved Oxygen —Theory of operation A very specific energy wavelength is transmitted to a ruthenium compound immobilized in a sol-gel matrix. The ruthenium will absorb this energy, changing the outer electron’s energy level. The electron will then collapse back to its original energy state, emitting the energy as a photon with a different specific wavelength. This is called fluorescing. If the intensity of the transmitted wavelength is tightly controlled, the amount of fluorescing is both predictable and repeatable. If oxygen molecules are present the amount of fluorescing is reduced, referred to as fluorescence quenching. By measuring the amount of quenching it is possible to determine the amount of oxygen present. Download Brochure -
Screen and Casing Bore Pipe for Monitoring Well Installations Cut your costs for well installation and operate more sustainably on site. Each pair of 3m lengths of pipe is sleeved in biodegradable plastic, which means the sleeve will biodegrade away when disposed to a landfill, allowing you to help reduce the amount of plastic waste build-up. Most environmental screen and casing is wrapped in conventional plastic but this is adding to our plastic waste problem. The FieldTech Solutions Wellscreen is wrapped in biodegradable plastic preventing further plastic waste. We also use biodegradable packing tape in our shipments. 50mm casing and screen is made from uPVC and to class 18 size and is manufactured following the Australian Standard for Monitoring Wells. Each piece has a coarse male/female thread for easy field assembly and is o’ring sealed. Our biodegradable plastic wrapping:- Will only biodegrade once in a microbe rich environment such as a landfill
- Does not require high oxygen or temperature to biodegrade such as in a commercial compost
- Helps you to operate more sustainably
-
Filter sock can be used to protect groundwater wells from infiltration of fine silt and sediment. Made from polyester and with a 340 micron pore size. Available to suit 50mm, or 100mm to 150mm monitoring well screen. Simply sleeve the filter sock over the pvc screen before installation. -
Alconox is a concentrated, anionic detergent for manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Ideal for cleaning contaminants from glassware, metals, plastics, ceramic, porcelain, rubber and fiberglass. Excellent replacement for corrosive acids and hazardous solvents. FSANZ Authorized. USDA authorized. Dilute 1:100. pH 9.5
Used to clean: Groundwater and Soil Sampling equipment,, Healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, sampling apparatus, catheters, tubing, pipes, radioactive contaminated articles, optical parts, electronic components, pharmaceutical apparatus, cosmetics manufacturing equipment, metal castings, forgings and stampings, industrial parts, tanks and reactors. Authorized by FSANZ and USDA for inspected meat and poultry plants. Passes inhibitory residue test for water analysis. Used to remove: Soil, grit, grime, buffing compound, slime, grease, oils, blood, tissue, salts, deposits, particulates, solvents, chemicals, radioisotopes, radioactive contaminations, silicon oils, mold release agents. Surfaces cleaned: Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, rubber and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Corrosion testing may be advisable. Cleaning method: Soak, brush, sponge, cloth, ultrasonic, flow through clean-inplace. Will foam—not for spray or machine use. Directions: Make a fresh 1% solution (2 1/2 Tbsp. per gal., 1 1/4 oz. per gal. or 10 grams per liter) in cold, warm, or hot water. If available use warm water. Use cold water for blood stains. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe, or ultrasonic method. Not for spray machines, will foam. For nonabrasive scouring, make paste. Use 2% solution to soak frozen stopcocks. To remove silver tarnish, soak in 1% solution in aluminum container. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized, or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic, and metal surfaces. Corrosion testing may be advisable.
