-
The Waterra 1 UP Peristaltic Sampling Pump can be powered by 110 and 220V AC, external 12VDC or its 12V internal battery. Suction lifts up to 8.5m. 4 Battery Choices LIFE Batteries are Lithium Iron Phosphate batteries that weigh about one half the weight of the SLA (Sealed Lead Acid) batteries. LIFE batteries a have better discharge curve, maintaining higher voltages for longer. Available in 20 Ahr and 12 Ahr formats. A LIFE 12 Ahr 1 UP Pump weighs less than 8.1kg and the 20 AHr unit weighs less than 9.5kg. SLA Batteries are Sealed Lead Acid conventional batteries that are a less expensive than LIFE batteries, but weigh about twice as much. Available in 20 Ahr and 12 Ahr formats. -
King Stuff is an all-weather product hydrocarbon free grease designed for monitoring well installs, and other environmentally sensitive drilling applications requiring a petroleum hydrocarbon-free product. King Stuff has a temperature range of -40°C to 260°C with a flash point of 226.7°C.- Hydrocarbon free
- Green colour
- Synthetic type oil
- Water resistant
- Drilling mud resistant
- Biodegradable
- Corrosion inhibited
- Vegetable-based fluids
- Nontoxic, Conforms to assembly bill 1953
-
Silicone Peristaltic Tubing is flexible and soft, making it suitable for peristaltic pumps. FieldTech Solutions Peristaltic Silicone Pump tubing is available in 15 m individually wrapped coils, available in these sizes:- 1/8" ID / 1/4" OD, 15m roll
- 4.8mm ID x 9.5mm OD, 15m roll, for use with Geotech Peristaltic Pump
- 1/4" ID / 3/8" OD, 15.2m roll
- 5/16" ID / 1/2" OD (7.9mm ID x 12.7mm OD) 15m roll
-
The QED Soil Hydrocarbon Analyser is a total organic hydrocarbon in soil and groundwater analyser that can accurately analyse both soil samples and water samples on site. Suitable for direct on-site detection and analysis, it can be synchronized with the on-site investigation and sampling team or in the field. During excavation or in the early stage of pollution, quickly determine the source of gasoline (GRO) or diesel (DRO) or other oil pollution. The QED Hydrocarbon Analyser can reliably identify petroleum hydrocarbon in the sample, as it uses the same solid state micro-spectrometers used by NASA to provide unrivalled accuracy in identifying petroleum hydrocarbons and PAHs. The QED Soil Hydrocarbon Analyser can also solve the error of interfering substances caused by natural plant corruption in current laboratory analysis methods. The QED Soil Hydrocarbon Analyzer can reduce the laboratory analysis costs and provide a faster and more convenient quick screening qualitative and quantitative method on site. Watch video demonstation: -
Landfill-biodegradable nitrile disposable gloves that provide comfort, dexterity and protection from chemicals. Once these landfill-biodegradable nitrile gloves are disposed of to landfill, biodegradation is accelerated approximately 90%+ faster than conventional nitrile gloves, producing an organic matter (a natural fertiliser) and no microplastics. *Biodegradation has been verified by independent laboratory using ASTM D5511 for anaerobic landfill conditions. -
The Hydrolift is a portable, 240v operated electric device that is used to automate the operation of the Waterra Pump System. This actuator is perfect for purging and sampling 50mm diameter monitoring wells up to 60m deep. In special circumstances it can lift up to 90m. This electrical Tubing Actuator is optimized to operate with the Standard Flow System up to its maximum effective depth and will operate with the High Flow System up to a depth of 45m. This Tubing Actuator is the ideal choice for the frequent user of the Waterra Pumping System with moderate to extreme pumping requirements (Low, Standard and High Flow). Using the Hydrolift will result in a big boost to your field sampling program. The Hydrolift is powered by a 3/4 horsepower (560 watts) electric motor and generates a 4 inch (10 cm) stroke at up to 140 cycles per minute. The Hydrolift weighs about 16 kg and requires an electrical power supply of at least 1000 watts. *Please note the Hydrolift requires a generator to power it. See image 2 for an animation on how the system works. -
A lower cost Class B option
The Nondo Maxi 320 - Class B monitoring well cover is a large flush-mounted well cover with a cast iron lid and base, and is ideal for 100mm or larger monitoring well installations. The Nondo Maxi 320 - Class B has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class B. Please note that it is not suitable for road traffic. The 337mm (OD) diameter cover is secure with 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be also levered up with a screwdriver. Due to its weight, we have designed a lifter which allows the lid to be removed safely from the base (see video below). -
A lower cost Class B option **Please note this well cover is a Class B well cover that is not suitable for road traffic.** The Nondo Maxi SMC B well cover has a non-metallic lid, making it ideal for wells with instrumentation inside requiring data transmission through the lid, such as a telemetry system. It has an SMC (sheet moulding compound) lid, a cast iron base ring, and a plastic skirt. The traditional looking 2-bolt design has a completely sealed lid with a unique one piece gasket to prevent any surface water ingress, and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class B. The 337mm diameter cover has an anti-slip dimpled surface on the lid, 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be levered off with a screwdriver. -
These general multipurpose gloves are suitable for multiple applications and trades including gardening, parts handling and tool operations. Reduced thickness ensures optimum tactility when working on delicate projects, provides comfort and flexibility during extended wear. These reusable landfill biodegradable multipurpose gloves can be disposed of in the general rubbish bin, and once disposed to landfill, biodegradation is accelerated approximately 90% than conventional multipurpose gloves, producing an organic matter (a natural fertiliser) and no microplastics. For further information click here. -
Landfill-biodegradable nitrile gloves can be recycled or disposed of in the general rubbish bin. Once disposed to landfill, biodegradation is accelerated approximately 90%+ faster conventional nitrile gloves, producing an organic matter (a natural fertiliser) and no microplastics. For further information click here. -
The Nondo Safety Lifter / Multi Tool enables a safe way to remove our steel well cover lids and comes with all the necessary allen keys for our well covers and TriCap well plug.
-
Our 1 litre slug is made for performing a 'slug test', which enables hydraulic conductivity estimation in monitoring wells. Designed to fit within a 50mm well and displace 1L of water. Custom sizes can also be made for larger wells, or multiple slugs can be used together to displace more water in the monitoring wells. -
A Large Well Cover with Cast Iron Lid The Nondo Maxi 320 monitoring well cover is a large flush-mounted well cover with a cast iron lid and base, and is ideal for 100mm or larger monitoring well installations. The 337mm (OD) diameter cover is secure with 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be also levered up with a screwdriver. Due to its weight, we have designed a lifter which allows the lid to be removed safely from the base (see video below).
-
Biodegradable Cleaning Concentrate Quantumclean is a highly effective decontamination and cleaning liquid which is also biodegradable. It can be used to clean pumps, bailers, tubing, soil augers, or any sampling equipment where cross-contamination between sampling locations is a concern. Quantum clean can also be used to clean radioactive contamination. Quantumclean is a concentrated mixture of surfactants, chelating agents, stabilising agents and alkali salts in aqueous solution. The mixture is non-flammable, completely water miscibleand biodegradable. Quantum clean does not containphosphates or poly-fluoroalkyl substances. -
The portable tubing reel is a great solution for tubing management when groundwater sampling. Made from high quality steel and powder coated blue for a professional finish. It folds down flat to easily fit in the boot of a car, and can be assembled in less than a minute. It will hold either 1 or 2 reels of BioTubing with ease.
-
Filter sock can be used to protect groundwater wells from infiltration of fine silt and sediment. Made from polyester and with a 340 micron pore size. Available to suit 50mm, or 100mm to 150mm monitoring well screen. Simply sleeve the filter sock over the pvc screen before installation. -
The Flexipoint is pointed bottom end cap made from recycled plastic. It is long enough to be installed on either the male or female threaded end of the 50mm slotted PVC screen, without a need to cut off the female thread. -
Disposable Bailer Cord Our disposable bailer cord is mainly used to deploy bailers and sleeve samplers. Made from polypropylene, it is well suitable for all types of ground water sampling. The 2.5mm diameter twine is packaged in a convenient 100m spool and also made in Australia. It has a manufacturers stated break load of approximately 195kg, so can be used for a range of applications.
-
These convenient socks pre-filled with approximately 312.5 g of EOx® Powder. They are 38mm diameter, suitable for 50mm wells or larger. EOx® is a granular powder of calcium peroxide that provides slow and steady oxygen release for long-term aerobic biodegradation. Suitable for enhanced aerobic biodegradation of BTEX, PAHs, DRO, MTBE, VC and other complex contaminants in soil and groundwater. -
The WC25Gas has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. -
The WC100GAS has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. The WC100Gas can also be locked in place with a padlock or by using a security screw or both for extra security. It has a large wing nut, designed to make it easier to tighten or release the plug. It comes with a ring below so you can hang/attach tubing, skimmers or sleeve samplers in the well. -
Our largest standpipe cover is the all recycled plastic SP272. This round standpipe cover has a 250mm internal diameter which means there's even enough room for 150mm PVC well installations. The mottled, multi-coloured look is a result of the post-consumer plastic items being melted together to make a unique and great looking cover. Ideal for landfill or remediation applications where a larger diameter cover is often desired. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. -
Corrosion Protection for Standpipe Covers: Certain site requirements or tender specifications require galvonised steel. The standpipe also has a unique non-binding swivel hinge for long life, which is protected from rain. Traditional looking standpipe covers have hinges which are exposed to the elements and therefore prone to corrosion and eventually seizing up or dropping off. Our unique design has addressed this weakness. The 100mm square galvanised steel standpipe covers have a unique non-binding 'hidden hinge' design which provides a rain proof cover. These low-cost covers have a galvanised / silver finish for corrosion protection. -
This all pneumatic box will shut off the air supply to down-hole pumps when the tank, drum or IBC becomes full. This prevents overfilling of the drum and creating a spill. Ideal for LNAPL recovery projects. Comprising of a separate control box and tank sensor, the control box can be mounted separately from the drum. The tank sensor is screwed into the drum and connected to the control box by a small air hose. Being all pneumatic makes this inherently intrinsically safe. -
The 100mm well plug is manufactured from a recycled composite glass filled polymer that will not corrode, and is stronger than steel, pound for pound. The center locking mechanism allows a padlock to be secured in a variety of positions, offering more flexibility in applications with limited space. Constructed of recycled composite glass-filled polymer which is stronger than steel pound for pound, the 100mm well plug is designed for years of worry-free use. The wing nut design with a recessed grip allows a padlock (not included) to be easily installed. The 100mm well plug has a tethering attachment at the base for use with a variety of instruments, features no metal parts, and can be disassembled for easy decontamination. The standard well plug and GasCap is available for 100mm wells. -
Biogone ziplock bags are landfill biodegradable and well suited for PID soil headspace sampling. Available in packs of 25 or cartons of 500. -
Made from post-consumer recycled plastic (i.e. bottles and other plastic waste sent for recycling), these stylish upright covers give your monitoring well a professional finish. By purchasing products made from recycled plastic you are supporting the plastic recycling industry. The reuse of current resources and the conservation of our future resources are fundamental to all our design concepts where practical. The Economy Standpipe Cover is a thinner walled option for budget limited projects. They have a recycled plastic inner core and a bright yellow outer layer for high visibility.
-
The TriCap-LOG has been specifically designed for use with submersible groundwater level logging devices. Just like the TriCap-GAS, the hollow shaft intersects a horizontal side hole through the shaft near the bottom. An elbow fitting installed in the top enables the well to be vented to the atmosphere. Attach optional tubing to allow the vent port to be raised up above any surface water and prevent it from flowing into the well through the vent. A stainless spring clip is also provided for easy logger attachment. The Tricap-Log is the perfect choice for use with submersible groundwater logging devices. It features an elbow fitting which vents the well to atmosphere, and a unique stainless spring clip for easy logger attachment. The TriCap is made from recycled plastic for sustainability and enables a groundwater monitoring well to be sealed and locked. -
An environmental monitoring well cap or plug made from post-consumer recycled plastic for sustainability. The TriCap provides:- Strong protection for your monitoring wells
- Self locking option with additional stainless steel security bolt, using a special key tool or allen key
- Hanger cable holes on bottom end of shaft
- Fully sustainable, made from recycled plastic waste
- Wide rubber ring provides a water tight seal
- Also available in orange
-
The TriCap-GAS has a quick connect gas fitting and dust cap installed on the top, enabling gas in the well to be monitored or sampled with a gas instrument or suitable pump. The TriCapGas can also be locked in place with a padlock or by using a security screw or both for extra security. The TriCap has a partially hollow shaft that intersects a horizontal side hole near the bottom. This allows the well gas to be drawn in through the side hole and out the top. The side hole also serves to hang sampling or monitoring devices off the bottom of the cap while at the same time gas samples can be taken out through the shaft and out the gas quick connect fitting. -
LNAPL Skimming Socks for 50mm Monitoring Wells The easiest way to remove small amounts of fuels from monitoring wells is with these low-cost skimming socks. Each sock holds about 500ml. -
Used during soil vapour monitoring, 3-way and 2-way valves are an ideal addition as part of leak testing and purging.- 3 way valves with 2 Female luer ports and 1 male luer lock
- 2 way valves with 1 Female luer ports and 1 male luer Lock
-
When direct push sampling in sands or loose soils, a core catcher is recommended to be used in the BioLiner, which will stop the soil sample from falling out when retrieving from depth. Our core catchers are 100% recycled plastic and landfill-biodegradable. -
Prepacked Screen for Environmental Monitoring Wells- Great solution for sites prone to collapsing sands
- Ensures accurate placement of filter media across desired interval
- No adapters required, will thread directly onto our casing
- Available in 50mm (PN18), 1.5m lengths
- Male / Female threaded
- Bottom end caps available, including the universal 'FlexiPoint 50'
-
A Solution for Legacy Covers The universal FB180 lid is designed to fit legacy well covers from other manufacturers which are no longer in production. This includes the 'EE' FB180, and other similar covers. Sometimes lids can go missing or get broken on site over the years. Rather than breaking up the concrete to install a new cover, often involving costly traffic management, you can now simply replace the lid. Suitable bolts and an oring is also supplied with the lid. Please note it is not a replacement lid for our Nondo covers. -
A Large Well Cover with Non-Metallic Lid The Nondo Maxi SMC well cover has a non-metallic lid, making it ideal for wells with instrumentation inside requiring data transmission through the lid, such as a telemetry system. It has an SMC (sheet moulding compound) lid, smc base ring, and a sheet metal skirt. The traditional looking 2-bolt design has a completely sealed lid with a unique one piece gasket to prevent any surface water ingress, and has been tested to exceed load bearing requirements for traffic suitability for Australian Standard AS3996 Class D. The 337mm diameter cover has an anti-slip dimpled surface on the lid, 2 bolts requiring an 8mm allen key, and a notch in the bottom of the lid to allow it to be levered off with a screwdriver. Optional add on: Nondo Safety Lifter Use the Nondo Safety Lifter tool to safely remove and reinstall the heavy lid and to avoid crushed fingers.
-
Using syringes for groundwater filtration in the field is a popular low-cost option. It can be an ideal choice if you are not using a pump, and have a manual device such as a bailer. When using a syringe 50ml at a time can be pushed through a filter. Small low-capacity filters can be used where turbidity is low. However if turbidity is high then it may be better to use a high capacity filter such as the AquaPore Biodegradable Filter Capsule. Syriges are available in luer-lock, catheter tipped, or eccentric tipped varieties. -
The InsiteIG Portable Meter is a unique instrument that combines advanced electronics with exceptional functionality and ease of use. The meter will accept any standard portable DO, SS, pH, or ORP sensor and will automatically configure itself for the correct operation. The quick-disconnect, mil-spec connectors allow for quick sensor swaps. The meter includes a 250 point data logger that records sensor type, sensor reading, date, time, and location. The included Portalog software offers several sort options to customize the downloading and reporting of collected data. The rechargeable batteries allow for 8+ hours of use between charges.
The InsiteIG PortaCaddie is an optional organizational tool, available to purchase with each sensor, that captures the meter along with the sensor and cable. The PortaCaddie is designed to manage the cable to eliminate tangles while using the system in the field. The meter, sensor, and cable are retained securely during transport and are easily deployed at the desired test location. The rugged design was built specifically for the rigors encountered by field instrumentation. The PortaCaddie was designed to offer a level of protection to the meter, sensor, and cable.
Compatible sensors for the IPM
Portable DO Sensor ( PDO) The Portable Dissolved Oxygen sensor incorporates optical fluorescent technology, solid state electronics, and a unique side mount element. The InsiteIG PDO sensor is the only portable optical DO sensor that does not require expensive replacement caps. Nitric Oxide does not interfere with the InsiteIG portable sensor.
- Measuring Range: 0 to 25 ppm
- Accuracy: 1% of the reading or .05 ppm, whichever is greater
- Repeatability: 0.01 ppm
- Response Time: 95% in under 60 seconds
- Resolution: 0.01 ppm below 4.00, 0.1 ppm above 4.0
- Drift: less than 1% per year
- Temp. Range: 0°C to 60°C
- 20ft sensor cable
- sensor connector
- Measuring Range: 0 to 30,000 mg/l total suspended solids
- Accuracy: +/- 5% of the reading or +/- 100 mg/l whichever is greater
- Repeatability: +/- 1% of the reading or +/- 20 mg/l whichever is greater
- Response Time: 95% in under 60 seconds
- Resolution: 1 mg/l below 1000 mg/l, 10 mg/l from 1001 to 9999 mg/l, 100 mg/l above 10,000 mg/l
- Drift: less than 1% per year
- Temp. Range: 0°C to 60°C
- 20ft sensor cable
- sensor connector
- Measuring Range: 2 to 12 pH
- Temp. Range: 10°C to 60°C
- 20ft sensor cable
- sensor connector
- Measuring Range: +/- 2000mV
- Temp. Range: 10°C to 60°C
- 20ft sensor cable
- sensor connector
-
The Mityvac Silverline Hand Pump can be used for filtering water samples, using either vaccum or pressure to move the sample through the filter. Most commonly they are used on the vaccuum setting in conjunction with the Stericup filters. -
Alconox is a concentrated, anionic detergent for manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Ideal for cleaning contaminants from glassware, metals, plastics, ceramic, porcelain, rubber and fiberglass. Excellent replacement for corrosive acids and hazardous solvents. FSANZ Authorized. USDA authorized. Dilute 1:100. pH 9.5
Used to clean: Groundwater and Soil Sampling equipment,, Healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, sampling apparatus, catheters, tubing, pipes, radioactive contaminated articles, optical parts, electronic components, pharmaceutical apparatus, cosmetics manufacturing equipment, metal castings, forgings and stampings, industrial parts, tanks and reactors. Authorized by FSANZ and USDA for inspected meat and poultry plants. Passes inhibitory residue test for water analysis. Used to remove: Soil, grit, grime, buffing compound, slime, grease, oils, blood, tissue, salts, deposits, particulates, solvents, chemicals, radioisotopes, radioactive contaminations, silicon oils, mold release agents. Surfaces cleaned: Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, rubber and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Corrosion testing may be advisable. Cleaning method: Soak, brush, sponge, cloth, ultrasonic, flow through clean-inplace. Will foam—not for spray or machine use. Directions: Make a fresh 1% solution (2 1/2 Tbsp. per gal., 1 1/4 oz. per gal. or 10 grams per liter) in cold, warm, or hot water. If available use warm water. Use cold water for blood stains. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe, or ultrasonic method. Not for spray machines, will foam. For nonabrasive scouring, make paste. Use 2% solution to soak frozen stopcocks. To remove silver tarnish, soak in 1% solution in aluminum container. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized, or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic, and metal surfaces. Corrosion testing may be advisable. -
Liquinox is a concentrated, anionic detergent for manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Extremely mild and completely soluble in hard and soft water. USDA authorized. Dilute 1:100. pH 8.5Used to clean: Healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, sampling apparatus, catheters, tubing, wine glasses, clean rooms, medical devices, optical parts, electronic components, pharmaceutical apparatus, cosmetics manufacturing equipment, metal castings, forgings and stampings, industrial parts, pipes, tanks and reactors. Authorized by USDA for use in federally inspected meat and poultry plants. Passes inhibitory residue test for water analysis. Used for phosphate sensitive analysis ware. FDA certified. Used to remove: Soil, grit, grime, slime, grease, oils, blood, tissue, particulates, deposits, chemical and solvents. Surfaces cleaned: Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, cement and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Used for art restoration. Corrosion testing may be advisable. Cleaning method: Soak, brush, sponge, cloth, ultrasonic, flow through clean-inplace. Will foam—not for spray or machine use. Directions: Make a fresh 1% solution (2 1/2 Tbsp. per gal., 1 1/4 oz. per gal. or 10 ml per liter) in cold, warm or hot water. If available, use warm water. Use cold water for blood stains. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe or ultrasonic method. Not for spray machines, will foam. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic and metal surfaces. Corrosion testing may be advisable. Formerly known as LIQUI-NOX. Tech-notes: Is Alconox detergent the same as Liquinox detergent ? -
Mi605 is a portable, microprocessor-based, Dissolved Oxygen meter with automatic calibration and temperature compensation (ATC) specifically designed for spot sampling applications. Dissolved Oxygen measurements can be displayed in parts per million (ppm=mg/L) or in % of saturation. The temperature is indicated in Celsius from 0 to 50°C with 0.1 resolution. The meter compensates salinity and altitude automatically after manual input. Calibration is very simple and fast: just expose the polarographic Dissolved Oxygen probe MA840, supplied with the instrument, to air and press the CAL button. No need for chemical solutions! A HOLD button allows the user to freeze the reading on the LCD. The low battery indicator and the easy to replace screw on cap membranes make the Mi605 a compact instrument and ideal for all applications: aquaculture, wastewater, environmental and educational. -
The Milwaukee Low FLow Kit is a convenient and reliable multi-parameter water quality monitoring system, designed specifically for low-flow groundwater sampling at a budget price. The Milwaukee Low Flow Kit contains everything you need for accurately monitoring water quality parameters during low-flow groundwater sampling, in a convenient and rugged carry case. -
The Waterra PowerPack PP1 provides the mechanical actuation for pumping with inertial pumps to depths of over 60m, in a fully portable, single operator power unit. At 13 kg, the PowerPack PP1 provides outstanding pumping performance. The PP1 is powerful enough to lift water from over 60m depth using the Standard Flow System, and is so compact that it fits onto a back-pack frame. The PowerPack PP1 incorporates clamps for Waterra High Flow and Standard tubing sizes (adaptors are available for smaller tubes). A Honda GX-25 series, 1.0 horsepower, 4 stroke, gasoline motor powers this device, which can run for approximately 1 hour without refuelling. -
The Heron Instruments barLog, barometric logger is used to automatically compensate readings stored on the dipperLog for changes in barometric pressure. The barLog, with readings every 1 hour and a memory capacity of 32,000 data points, is recommended for long term monitoring or where more than one logger is deployed withing in a 5 km radius. The dedicated, intuitive software makes the dipperLog quick and easy to program and launch. Simply recover your data, save your findings in a tabular display and graph, view both parameters side by side in a split screen. Use the Heron Instruments’ barLog alongside your dipperLog Groundwater Data Logger for the most accurate data possible. Add a barLog to your quote for the dipperLog TOUGH, dipperLog 64, or dipperLog 32. Download Brochure
-
The dipperLog 128+ is a highly accurate groundwater data logger used by hydrogeologists, hydrologists, environmental technicians, water well contractors and other groundwater professionals. The dipperLog 128+ is a reliable and cost-effective solution to long and short-term monitoring of groundwater levels and temperature in wells, boreholes and open bodies of water. All Heron loggers are available in various deployment options: 1) Suspended Version – pull the dipperLog out of the well to download 2) Direct Read Version – enables you to do real time readings and download your data while the dipperLog is still in the well. 3) Reel Version – a portable solution, ideal for short term slug and pump testing Download Brochure -
The premium, highly accurate dipperLog TOUGH+ with titanium body and transducer is suitable for use by environmental technicians and other groundwater professionals in the most caustic and hazardous of environments. The dipperLog TOUGH+ is a reliable, cost-effective solution for long and short-term monitoring of groundwater levels and temperature in wells where contamination is a concern. Suspended Version: Install the logger using a suspension cord and simply pull the logger up, connect to a laptop or tablet with a P.C. Communication Cable and retrieve your data. Real time readings are not available with this option. Direct Read Version: This is the least labour-intensive model for groundwater data logging. The data logger is suspended on a direct read cable, which establishes a connection to the data logger at the wellhead. Programming, downloading, stopping and starting data collection can be done while the logger is deployed. Just connect your laptop or Windows Tablet at the wellhead. Reel Version: An ideal option when transporting your data logger from site to site for pump and slug tests or any other short-term deployment. Programming and downloading of the data is capable via the connection on the face plate on the reel. Real time readings are available with this option. barLog: A barometric logger, that is used to automatically compensate readings stored on the dipperLog for changes in barometric pressure (for absolute version). Recommended for long term monitoring or where more than one logger is deployed within a 5 km radius. Download Brochure -
Vertical Downhole Inspection Camera The dipper-See EXAMINER vertical downhole inspection camera is a cost-effective way for people performing well inspections, maintenance, and installation to do their jobs quickly and accurately. The dipper-See EXAMINER comes with everything a well inspector, well driller, or hydrogeologist needs to do more work in less time. The Heron dipper-See EXAMINER is a robust and cost effective vertical downhole inspection camera. Designed with portability in mind, this self-contained unit is ideal for viewing in wells, drains, vertical shafts, open bodies of water, boreholes and narrow tubes over 25mm (1”) in diameter.* The dipper-See EXAMINER and the included accessories are easily transported in the provided super tough wheeled carry case and accessory case, ideal for protecting your investment from the elements. The adjustable positioning arm, conveniently attached to the frame, offers an ergonomic solution for adjusting the monitor for viewing the High Definition (HD) display screen at different angles and varied lighting conditions. The monitor conveniently houses all of the controls on the front of the panel. Record the video/audio on the SD card provided with the DVR, for easy transfer of video to another device. Please note that the monitor is rated IP65 and should be covered during wet or inclement weather and protected against direct exposure to water projection (spraying). The HD, detachable See-120 camera probe is designed to work in the harshest environments and stand up to the most rigorous use. The camera probe can be easily removed at the link connection for field replacement and for future camera upgrades. The built-in hanger on the frame can support the unit at the top of the well, allowing for hands-free viewing while in the field. Available in 150m or 500ft tape lengths only* Download Brochure -
Drilling standards for environmental applications often require that wells are drilled without the introduction of fluids. To achieve this goal hollow augers can be utilised in unstable formations where solid stem augers are not effective. 3 sizes of timber plugs are now available for your hollow stem auger installations. Made from recycled timber for sustainability.- 57mm (2.25")
- 108mm (4.25")
- 159mm (6.25")
-
Biodegradable Sleeving for Sonic Rigs Now you can reduce your plastic footprint on sonic rig sampling jobs by using landfill-biodegradable HDPE sleeving. The clear sleeving has a 203mm lay-flat width, and a thickness of 150 micron. Suitable for Geoprobe, Boart Longyear, and any other sonic rigs which use 8" lay-flay sleeving. -
Plug & Play Compatability - Smart Sensors The InsiteIG Dual Channel Analyser is a unique system that combines advanced electronics with solid-state, smart sensors. The analyser will accept any combination of two standard InsiteIG DO, SS, pH, or ORP sensors and automatically configures for the correct operation. The system allows for flexible and economical process monitoring and control. Fluorescence Dissolved Oxygen —Theory of operation A very specific energy wavelength is transmitted to a ruthenium compound immobilized in a sol-gel matrix. The ruthenium will absorb this energy, changing the outer electron’s energy level. The electron will then collapse back to its original energy state, emitting the energy as a photon with a different specific wavelength. This is called fluorescing. If the intensity of the transmitted wavelength is tightly controlled, the amount of fluorescing is both predictable and repeatable. If oxygen molecules are present the amount of fluorescing is reduced, referred to as fluorescence quenching. By measuring the amount of quenching it is possible to determine the amount of oxygen present. Download Brochure -
Plug & Play Compatability - Smart Sensors The InsiteIG Single Channel Analyser is a unique system that combines advanced electronics with solid-state, smart sensors. The analyser will accept any standard InsiteIG DO, SS, pH, or ORP sensor and automatically configures for the correct operation. The system allows for flexible and economical process monitoring and control. Fluorescence Dissolved Oxygen —Theory of operation A very specific energy wavelength is transmitted to a ruthenium compound immobilized in a sol-gel matrix. The ruthenium will absorb this energy, changing the outer electron’s energy level. The electron will then collapse back to its original energy state, emitting the energy as a photon with a different specific wavelength. This is called fluorescing. If the intensity of the transmitted wavelength is tightly controlled, the amount of fluorescing is both predictable and repeatable. If oxygen molecules are present the amount of fluorescing is reduced, referred to as fluorescence quenching. By measuring the amount of quenching it is possible to determine the amount of oxygen present. Download Brochure -
For Narrow Diameter Wells The Skinny Dipper water level meter is ideal for measuring static water levels in narrow wells, boreholes, tubes and piezometers. The slim line tape and ¼” probe enable users to take readings while the pump is still in the well, whereas wider tapes may get tangled. The premium padded carry case comes included to protect your precision instrument from the elements. The ¼” polyethylene tape, available in metric (mm) or engineering scale (1/100’), is marked with black and red graduations, making measurements easy to read in the field. -
The Heron 4-20mA Pressure Transmitter is easily integrated into an existing SCADA system, digital display and 3rd party data logger. It will provide a continuous, accurate water level reading for a wide variety of applications. A two-wire 4-20mA Pressure Transmitter current configuration is used with the Heron Pressure Transmitter which is the most widely used signal transmission for transducers in industrial environments.- Vented cable provides real time barometric compensation
- Simple two-wire connection
- Output signal is compatible with most telemetry, SCADA and PLC systems
- High noise immunity on long cable runs
- Wide range of supply voltage (7.5VDC-35VDC)
- High accurate water level measurements
- Reverse polarity protected
-
Bioremediation Products Fieldtech Solutions is proud to represent EOS Remediation in Australia. EOS Remediation is the leading provider of bioremediation products that re-engineer the groundwater environment, transforming contaminants into non-toxic end products. EOS Remediation’s products are ecologically sustainable (USDA Certified BioPreferred Products), and cost-effective with proven results. Most of these products are being manufactured locally here in Australia. Their diverse family of products, driven by extensive research and development, are available to meet a variety of project needs. If you have a current bioremediation project, and you are you looking to calculate the volume of EOS product required, we request that you please fill in the Site Evalution Form and email back to us so we can help. Not all fields may be known but please fill in as much information as you can. Download Site Evaluation Form -
Sterile-filter and store 150 mL up to 1000 mL of cell culture media using trusted Stericup® filter units, which include a bottle-top filter and a receiving flask, and Steritop® bottle-top filters.
-
The dipperLog VENTED+ is a reliable, cost-effective solution for measuring groundwater levels and temperature in wells, boreholes and open bodies of water. The dipperLog VENTED+, incorporates a gauged transducer that measures pressure exempt from barometric influences which is ideal to use in both long and short-term monitoring. The dipperLog VENTED+ is removable from the vented cable, allowing easy field replacement. Just connect your laptop or Windows Tablet at the wellhead. Download Brochure
-
The Heron H.OIL & SM.Oil interface meters are used to measure the thickness of floating or sinking hydrocarbon products (LNAPL, PSH, DNAPL), in groundwater accurately, reliably, safely & economically. The SM.Oil is essentially a smaller, lighter and mini-version of the industry standard H.Oil. Unlike other interface meters, the H.Oil and SM.Oil come with fully submersible probes. Easy to Operate with Accuracy The easy to read accurate (ASME standard) heavy duty Kynar® jacketed tape allows you to measure with confidence to 1mm resolution. Ruggedness and Dependability For dependable field use, it features an environmentally protected encapsulated circuit for safety and durability on an easily removable modular electronic panel. The field changeable probe makes your job more efficient. Save Money on Repairs & Replacements The unique flexible link between tape and probe protects the tape. Should the probe become “hung up” in the well, the link will break, saving the tape by sacrificing the less expensive replaceable probe. In addition, the core of the measuring tape used is high tensile steel with a breaking load over 300Lbs (136kg)- to further protect the instrument. The modular constructed quick change probe and electronic panel make replacing parts fast and convenient. Safety over a Wide Range of Gases The industry leading H.Oil interface meter offers you the highest protection against fire and explosion. -
Our range of Premium Graded Sand and Gravel is produced from water washed high purity silica. Dry screening ensures excellent control of Particle Size Distribution. The sand and gravel is tested and controlled to rigorous standards which ensure consistent physical properties resulting in predictable and repeatable performance. Sibelco Australia actively manages a Quality Management System certified to ISO9001:2008. High quality Gravel typically finds use in applications such as water filtration, drilling and flooring. The following typical properties may help you to determine the product which will best suit your application. -
The engineered plastic 12 volt submersible centrifugal Tempest/Twister® pump is capable of pumping up to 18m from ground level, and the Super Twister® up to 25m (Depth to Water) by simply connecting to a 12 volt deep cycle battery. They are well suited for continuous sampling and purging of groundwater wells, or Low Flow Sampling by adding the optional controller.
They can also be mounted on a hose reel as indicated by the images. -
These Standpipe Covers are designed to be simple and robust, with a unique large clearance hinge that will not rust and bind, and an attractive bright blue powder coated finish. A padlock can also be used on the lid for extra security. 3 different sizes to choose from:- SPRB114 - 114mm diameter
- SPRB165 - 165mm diameter
- SPRB219 - 219mm diameter
-
Lightweight and Rugged The SP155 is the largest of our plastic Standpipe Covers. With a 145mm ID it is ideal for LFG installations where using a 'Gas Clam' instrument for continuous LFG monitoring may be desired.- Ideal for 100mm well installations
- Plastic standpipe cover, will not rust
- A wider opening (145mm ID) for use with a "Gasclam" or other instrumentation
- Strong protection for your monitoring wells with a professional, stylist finish
- High security with one way security screws to deter tampering
- High visibility yellow colour
- Safer to use with no sharp steel edges
-
Designed for applications such as Aquifer Injection, Groundwater Monitoring, Methane gas control or collection (typical in landfills and mines), Vacuum sampling at or below Leachate pads, Formation pressure monitoring, and Vadose zone sampling and injection. The Environmental Packer is a Fixed-End Style Packer manufactured using either Neoprene, EPDM or Viton® rubber gland element and Type 304 or Type 316 stainless steel.Applications:
- Remediation / Groundwater Injection
- Groundwater monitoring
- Methane gas control or collection in landfills and/or mines
- Monitoring formation pressures
- Vacuum sampling under leachate pads
- Vadose zone sampling and injection
-
-
The water tape2 water level meter is made for drillers, consultants and hydrogeologists that are looking for an economic water level meter that does not lack in quality. The water tape2 provides accurate water measurements without going over budget. The Heron water tape2, an economical water level meter, can be used for measuring both static and drawDown levels in open bodies of water, wells, boreholes and standpipes. This low cost unit with DUAL FUNCTION capability is ideal for every project and budget. The water tape2 manufactured with the white polyethylene tape, reinforced with Kevlar is available in both metric and engineering scale. Unlike some other white tape units, the water tape2 comes with a fully pressure rated probe* and carry bag. -
Measure the pH in soil easily using the Milwaukee Instruments MW101-SOIL pH meter kit. This portable meter is also suitable for use in a wide range of applications such as education, agriculture and horticulture, as well as water and environmental analysis.MW101 performs pH measurements with a 0.01 pH resolution and with manual temperature compensation.The meter is supplied with pH electrode and calibration solutions.
-
Suitable for our 100mm PN12 PVC Screen and Casing, these flush-fitting bottom end caps are available with either male or female threads to help minimise your off-cut wastage during 100mm well installations. -
Mi306 Conductivity / TDS / NaCl / Temperature Professional Portable Meter
Mi306 is a waterproof portable logging microprocessorbased Conductivity / TDS / NaCl / Temperature meter. The autoranging feature of the EC and TDS ranges automatically sets the meter to the scale with the highest possible resolution. The Auto Endpoint (HOLD) feature automatically freezes the display when a stable reading is reached.
The measurements are automatically (ATC) or manually (MTC) compensated for temperature. The temperature coefficient value is user selectable. It is possible to disable the temperature compensation and measure the actual conductivity (NoTC). The Battery Error Preventing System (BEPS) switches the meter off when the batteries are too weak to support proper function. The meter can store measurements in memory by logging function for retrieval at a later time upon user request.
Mi306 also allows data transfer to computer through the RS232 port. Double LCD displays, for simultaneous readings of the specific conductivity and temperature.
-
Conductivity, Temperature & Static Levels The Conductivity Plus enables accurate measurements of conductivity, water levels and temperatures in wells, boreholes, stand pipes and estuaries where salt water intrusion and contamination levels become a concern. Conductivity can be an early indicator of change in a water system due to fluctuations of salinity in water levels. The premium padded carry case comes included to protect your precision instrument from the elements. The high tensile steel core measuring tape is tested for stretch resistance to ASME standards and is ideal for profiling up to 50˚C. An LCD screen displays conductivity values up to 80,000 µS and temperature range from 0˚C – 50˚C. The conductance temperature compensation coefficient is 2.0%. Calibration of the conductivity plus is easy using readily available 1413, 5000, 12880, 111800 uS solutions, and up to 4 calibration points can be utilised. The Conductivity Plus provides a higher range of up to 250,000 μS/cm, which is the highest conductivity range on the market. -
Measures 4 parameters with 1 single probe, offering a combination of pH, Conductivity, total Dissolved solids and temperature measurements. You can select from a range of calibration buffers and also the temperature scale (°C or °F) can be selected. The multi-parameter probe MA851D/1, includes pH/EC/TDS and temperature, all in one rugged handle. Other features include different TDS factors from 0.45 to 1.00, and a range of temperature coefficients (ss) from 0.0 to 2.4% for greater consistency and reproducibility. The Stability Indicator prompts the user when the reading stabilizes. The Auto-Hold Function automatically freezes reading for later viewing. Large and Easy-to-Read display provides simultaneous readings of pH and Temperature or EC/TDS and temperature. -
Measures 4 parameters with 1 single probe. Mi805 offers you a combination of pH, Conductivity, total Dissolved solids and temperature measurements. You can select from a range of calibration buffers and also the temperature scale (°C or °F) can be selected. The multi-parameter probe MA851D/1, includes pH/EC/TDS and temperature, all in one rugged handle. Other features include different TDS factors from 0.45 to 1.00, and a range of temperature coefficients (ss) from 0.0 to 2.4% for greater consistency and reproducibility. The Stability Indicator prompts the user when the reading stabilizes. The Auto-Hold Function automatically freezes reading for later viewing. Large and Easy-to-Read display provides simultaneous readings of pH and Temperature or EC/TDS and temperature.
-
The Shelby sampler is a thin-walled soil sampling system. The system is used to sample soils that are particularly sensitive to sampling disturbance, as it has a very low wall thickness-to-sample area ratio. The sampler consists of a thin walled steel tube whose lower end is shaped to form a cutting edge. Fieldtech Solutions is now stocking U63 and U50 Shelby Tubes and drive heads. Drive Heads are available in AW, AWJ, or NWJ box threads. -
Mi415 Turbidity MeterTurbidity refers to the concentration of undissolved, suspended particles present in a liquid. Turbidity is a measure of the clarity of a sample, and for potable water applications, turbidity is a good indicator of water quality. Turbidity Measurement is achieved by analysing the amount of light refracted from suspended particles such as clay, silt and organic material. By measuring turbidity, by photometric or tube methods, it is possible to estimate suspended solids content.
The Mi415 has two operating ranges; 0.00 to 50.00 FNU, and 50 to 1000 FNU that can accommodate the most turbid condition you may encounter. The Mi415 is supplied in a hard carrying case, complete with reagents.
-
Dissolved Oxygen Smart Sensor The Model 32 is a solid state DO sensor with built-in smarts which outputs to Modbus RTU through RS232 hardware. It is designed to be connected into existing hardware which accepts the Modbus RTU protocol. The Model 32 sensor is extrememly rugged and reliable, utilising solid state technology for DO measurement. “I’m glad we got onto these, they’re great sensors, the M32 we have deployed is running like clockwork.” Lia - Hydrographer. VIC. -
The fox whistle is the ultimate low cost tool you can use for measuring depth to water. Our fox whistle is made from stainless steel, is 20mm in diameter and 200mm long. Air is pushed through the hole in the fox whistle and when it comes into contact with water, it makes a whistling sound. A 30m tape on a windup reel is also available to order as well. Please Note - Maximum depth recommended is approximately 20m, otherwise you may not hear the whistle. Also, not recommended for use in noisy environments such as a busy road or noisy site, as again you may not hear the whistle. -
The Heron dipper-T water level meter is designed for well drillers, consultants, and hydrogeologists all across the globe. The dipper-T is a rugged and dependable water level meter made from high quality materials, easy to use for a wide variety of applications. The dipper-T is capable of measuring both static and falling head levels. Static mode is used for measuring the depth of water in wells, boreholes and standpipes. DrawDown mode is used for measuring falling water levels during purging, well development and for low flow sampling; helping to protect your pump from damage caused by dry running. The Heron dipper-T is renowned for its premium, polyethylene coated yellow steel tape accuracy in measuring depth to water. Available in your choice of either metric or engineering scale. The highest accuracy begins with a top quality, heavy duty tape. Each tape is tested to ensure compliance with appropriate ASME standards. These tough tapes have a breaking load of over 150 kg. The tape is made from high tensile steel, ensuring resistance to stretching even at abnormal loads. Everything on the unit from the ergonomic vinyl carry handle to the easy clean, full depth stainless steel probe has been carefully designed to give you the very best water level meter. Each unit includes a sturdy padded nylon carrying bag. Drawdown Feature For Low-Flow Sampling With a touch of a button the unit changes from static to drawdown mode; a dual function unit at an affordable price. The dipper-T in drawdown mode is ideally suited for low-flow groundwater sampling. During sampling the drawdown level needs to be monitored closely so that it does not fall below the pump inlet. If the drawdown alarm sounds then the user can quickly slow the pumping rate or stop the pump temporarily and allow the well to recover. The drawdown feature may be used for measuring falling water levels during purging and well development, helping to protect electrical pumps from damage caused by dry running. The Well Casing Indicator Probe is used to measure the depth of metal casing in wells and boreholes from 50mm in diameter and upward. The Well Casing Indicator Probe works using magnetism. While the probe sits within the magnetic field of the steel casing, an auditory and visual signal is active. When the probe leaves the magnetic field the signal stops. Note the condition of the well for accurate readings. The Well Depth Indicator Probe (or bottom detector) is used to measure the full depth in wells and boreholes. The Well Depth Indicator Probe uses a pressure sensitive plunger to measure the distance to the bottom of the well. When the Well Depth Indicator Probe reaches the bottom of the well, the plunger enters the probe body closing a switch, initiating an audible and visual signal at the top of the well. -
The Swing Sampler enables you to reach out up to 2.4m from a river bank or shore to take a 1.2L surface water sample. It can also be used for reaching into tanks, drums, or any difficult locations with up to 90 degrees rotation on the free-swinging head. The sample jar has a volume of 1.2L and can be re-used (recommended to use Decon 90 to clean between samples). The re-useable sample jar is made from landfill-biodegradable plastic, so when it eventually gets disposed to a landfill it will biodegrade. -
VOC Sampling in Water or Soil Gas Sampling FEP or PTFE tubing is commonly referred to as 'Teflon® Tubing'. Teflon® is a registered trademark of DuPont, and they were the first company to discover these types of plastics in the 1940s. Fieldtech Solutions stocks clear FEP tubing for soil gas sampling in 1/4" OD size in 15m and 60m rolls. We can also supply a range of PTFE in larger diameter sizes. -
Soil Vapour Implants can be used for permanent or temporary installations. They can be used for soil gas sampling, air sparging, and even groundwater sampling. They are an accurate and economical way to sample soil vapour. These popular mesh implants come with a barb on top to connect to 1/4” Teflon® tubing. A threaded bottom connection allows connection to a weight to pull the implant down during installation. The implant mesh allows easy passage of the soil vapours to pass in from the target zone into the tubing. The barb allows leak free and tool-less connection of the Teflon® or other similar tubing up to the surface. A range of surface connection fittings are available to provide flexibility to various connection methods at the surface. Installation involves drilling or augering a hole down to the target zone, placing in an implant with connected tubing. Then backfilling around the implant with sand and gravel pack across the target zone. Finally filling back in with soil and or bentonite to make a seal from the surface. The top end of the tubing is where the soil vapour sample is drawn from. When not in use keep this capped.Do I need a weight? Due to the coiled Teflon® tubing acting like a spring, it can bind on the sides of the bore. For shallow installations of a few metres, a weight may not be necessary. For deeper installations a weight is recommended to pull the implant down to the bottom.
-
-
AMS soil augers are commonly used throughout the world for obtaining disturbed soil samples at or near the surface and for boring to depths where samples may be obtained with a soil sampler or soil core sampler.
Available in alloy steel or stainless steel, with either threaded or quick-connect options. Perfect for augering shallow depths, AMS soil augers can also auger deeper depths and are generally limited by only the time and muscle of the user. Listed below are the most common AMS augers that we stock. -
Landfill-Biodegradable Push-Tube Liners for Soil Sampling
The BioLinerTM has been available in Australia since 2012, and as the name suggests it is a plastic liner for soil sampling that will biodegrade* 90+% faster than conventional push-tube liners when discarded to a landfill. A special additive in the plastic encourages microbes to consume it. BioLinersTM are made from biodegradable* PVC, and will only start to biodegrade once in a microbe rich environment such as a landfill. They enable you to achieve the same sampling integrity as non-biodegradable liners but more sustainably. Soil push-tube liners, once used are normally discarded having served their purpose. However this adds to our plastic disposal problem. In Australia alone over 1.5 million tons of plastic waste is disposed of each year, approximately 30 million tons in the USA, and about 5 million tons in the UK. Unfortunately most of this goes to landfill with only a small percentage being recycled. This is unsustainable, and the problem will only get worse unless we change our consumer habits. Only the BioLinerTM can help you achieve more sustainable soil sampling. *Biodegradation has been verified by independent laboratory using ASTM D5511 for anaerobic landfill conditions.
-
Well Development or Sampling The stainless steel bailer is ideal for both groundwater sampling & well development. The all stainless steel construction and check ball allows for rapid decontamination between wells. The tapered top is designed to avoid hang ups in the well, and smooth raising & lowering. A 45mm diameter enables it to be used in standard 50mm monitoring wells. Reusable equipment such as this helps reduce the amount of disposable waste, and adds sustainability to your operation. -
Biodegradable Cleaning Concentrate Decon 90 is a highly effective decontamination and cleaning liquid which is also biodegradable. It can be used to clean pumps, bailers, tubing, soil augers, or any sampling equipment where cross-contamination between sampling locations is a concern. Decon 90 is highly effective on petroleum contamination such as fuels and oils, but also Strontium 90, Iodine 131, Carbon 14, Phosphorus 32, Au 198, Hg 203, Translutonium, Tantalum and radiocarbon are all handled by Decon 90. It also caters for a wide range of problem contaminants including: Abrasives, agar algae, apiezon get bacteria, blood, distillation residues, latex, protein complexes, pus, tar, sera, silicone, grease and oil, reagents and more. Download MSDS -
Landfill-biodegradable nitrile disposable gloves that provide comfort, dexterity and protection from chemicals. *Biodegradation has been verified by independent laboratory using ASTM D5511 for anaerobic landfill conditions. -
Low Cost, No Purge Groundwater Sampler These types of samplers are fast becoming a popular method for groundwater sampling on many Australian sites. Sleeve samplers make groundwater sampling a simple, three-step operation that can be more effective than purging or low-flow sampling. The low-cost, disposable sleeve captures a core of water from any discrete interval in the screened portion of the well with no change in water level and minimal disturbance to the water column. The sleeve is sealed except during sample collection, then re-seals itself, assuring that a formation quality sample is recovered. The tripod stand option provides a convenient place to hang a full sampler while filling sample bottles. Independent laboratory testing confirms that sleeve samplers are PFC/PFAS-free, based on analysis for 28 different PFCs at extremely low detection limits. -
Turn your BioTubing into a groundwater pump Waterra footvalves or inertial pumps have long been a reliable and effective way to sample groundwater. They consist of a one-way checkvalve which connects to a length of HDPE BioTubing. Oscillating the tubing up and down in the well produces a flow of water. The tubing can also be connected to external pumps such as the Waterra Powerpack or PowerPump. Waterra footvalves can be a great sampling solution for narrow diameter wells. Fieldtech Solutions stock a range of the most popular sizes such as the D25, D32, and D16 footvalves. Each of these can connect to our BioTubing which allows it to function as a manual groundwater pump.
-
The AquaPore inline filter is the world's first biodegradable filter capsule. Having the same special patented additive as all our other landfill biodegradable products, the AquaPore filter is a disposable plastic filter which will biodegrade when discarded to a landfill. It is especially convenient when used with low-flow groundwater sampling but can also easily be used with a bailer, or with a filter flask for surface water filtering. All AquaPore filters now come with a threaded barb adapter to allow easy connection to your low-flow discharge line (3/8" OD). The AquaPore 800 biodegradable filter has a huge 800cm2 capacity to handle water with high turbidity, while the AquaPore 500 has a 500cm2 capacity for medium turbidity. Both filters have the same proprietary additive we use in our other biodegradable products to make them landfill biodegradable. It has been designed specifically for the preparation of groundwater samples for dissolved metals analysis and for filtering large volumes of turbid groundwater. The AquaPore filter has been lab tested and rinsate verified for 66 trace elements complying with ANZECC recommendations. -
The BioBailerTM is a quick and easy way to sample groundwater. Simply lower the bailer into your well and it fills with water as it submerses. When you pull up to retrieve the bailer the check-valve closes, trapping approximately 1L of water inside. BioBailersTM are made from landfill-biodegradable* PVC, and will only start to biodegrade once in a microbe rich environment such as a landfill. They do not require high oxygen or temperature to biodegrade such as in a commercial compost. Achieve the same groundwater sampling integrity as non-biodegradable bailers but more responsibly.Need to sample LNAPL / PSH? The easiest and most cost effective way is with the Hydrocarbon only or HC BioBailers. HC BioBailersTM allow you to collect floating LNAPL / PSH from a well, without collecting water. The ball valve is denser than LNAPL but lighter than water so it pushes water out of the bailer while keeping the LNAPL. These bailers also have a wider mouth than regular bailers, allowing you to collect more LNAPL with each bail. Like all BiobailersTM they are landfill-biodegradable. -
Simply the best way to manage tubing for low-flow groundwater sampling
- The Rapid Reel is a simple cardboard tubing dispenser for our biodegradable tubing for low-flow sampling
- Low-flow sampling has just been made easier
- Simply connect the tubing to your sampling pump then deploy down the well, letting the tubing flow easily out of the Rapid Reel box
- Clean and simple
Testimonials:
"I used the rapid reel last time I was groundwater sampling and thought it was great. Made life so much easier, especially on the deep wells." (Samantha Walsh - Landserv)
“I have to say, when I saw the rapid reel on your website, memories sprung to mind of countless times spent fighting soggy cardboard reels and unruly tubing. The Rapid Reel did live up to my expectations. It definitely helped keep my ute/workspace tidier, and it was quicker and easier to reel out the quantity I needed." (Anonymous - Ventia) -
Is sampling groundwater responsibly important to your business? ...then switch to 'BioTubing'. Our landfill-biodegradable tubing helps minimise plastic waste build-up in our landfills. BioTubing is made from landfill-biodegradable* LDPE (low density polyethylene) or HDPE (high density polyethylene), and will only start to biodegrade once in a microbe rich environment such as a landfill. It does not require high oxygen or temperature to biodegrade such as in a commercial compost. BioTubing enables you to achieve high sampling integrity plus operate more sustainably. Bonded Tubing for Low-Flow Sampling Our bonded tubing has the 1/4″ and 3/8″ tubes bonded together with a thin bridge and conveniently packaged on a 100m spool. The air and water lines have been bonded during the extrusion (manufacturing) process, and can be separated easily in the field to connect to a pump and controller fittings. It is recommended to scrape the bonding bridge clean with a knife to ensure a perfect seal. Many people prefer using bonded tubing as it can simplify pump deplyment and handling, and it can reduce the possibility of getting pumps stuck. The easiest way to manage your bonded tubing during pump depolyment, sampling, and storage, is by using the Rapid Reel tubing dispenser. Ultra-Clean BioTubing Our BioTubing has been independently tested for any leaching of 58 VOCs and 101 SVOCs. The VOCs were tested using USEPA 8260B process and the semi VOCs via USEPA 8270. After tumbling for 18 hours the tubing showed 'non detect' on all the compounds analysed for. These compounds included Phthalates and PAHs. Data available on request. Waste Plastic Facts- In Australia alone over 1.5 million tons of plastic waste is disposed of each year, approximately 30 million tons in the USA, and about 5 million tons in the UK
- Unfortunately most of this goes to landfill with only a small percentage being recycled
- The use of plastic in western Europe and Australia is growing by about 4% each year
- Plastic can take up to 500 years to decompose
- Nearly every piece of plastic ever made still exists today
- By using BioTubing and other landfill-biodegradable products you are helping to reduce the amount of plastic waste build-up in our landfills
Our Products
Copyright © 2024 FieldTech Solutions. All rights reserved.
